Why is this happening
- Thread starter Ttwo
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Litch
Well-Known Member
- Posts
- 2,237
- Location
- Oxfordshire
Give us a clue???
- Posts
- 11,029
- Location
- North of the Wall
It looks like your trying to get your hi-lift in to the tubular outrigger 
You don't wanna do that!
You don't wanna do that!
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Not sure , but it looks like it might get painful or cause damage.
DO you know what you are doing???or trying to do?
Cheers
DO you know what you are doing???or trying to do?
Cheers
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
Standard Defender jack goes in the jacking points on the front chassis members, or on the rear crossmember.
Not into the outrigger.
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
And you would find it much easier to use a bottle jack under the axle for jacking anyway.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
I thought the bottle jack was the std Defender jack.....at least that is what is in mine....
, of course it may not be std , not much of the thing is anyway.Cheers
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
I thought the bottle jack was the std Defender jack.....at least that is what is in mine....
Cheers
Standard jack is one of those things with a screw thread wot he posted. Most use a bottle jack, it is easier.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Get a std LR bottle jack , plenty around that were used on the Discos, do the job great.
Cheers
Cheers
Turboman
Mab An Gov
- Posts
- 60,151
- Location
- Lathrowda, Kernow
There will be two holes in the end of the front chassis legs, there may be rubber plugs in them. And two holes in the rear crossmember.
Those are the holes that the jack goes in.
Personally, I would get a bottle jack. Old one out of a scrap Disco 2 works well.
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Like this, appears the Defender did at some point come with the bottle jack.
Cheers
Cheers
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
I think the term was cringe......LOL..
Never seen the point of lifting the chassis to change a tyre , much easier to lift the axle.
Cheers
frog hopper
Well-Known Member
- Posts
- 4,832
- Location
- france
Another thing is that the amount of strain you put on the crossmember to lift it enough to get a tyre off the ground can damage what might be a servicable crossmember that has just a little tinworm.
I would also not use a bottle jack day to day. I carry one for emergency tyre changes in the vehicle, and it is very useful for spreading the chassis to remove the gearbox crossmember but if I am working on it for planned maintenance I much prefer a trolley jack. It is more stable, and also useful as you can move what every you are supporting once it has been released eg transfer box.
discomania
Well-Known Member
- Posts
- 6,949
Hmmm indeed.
I am fairly certain a lot of outriggers would soon part company from the rest of the chassis if you attempted that on some of the Defenders out there.
It is there to give the seat belt mount something solid to bolt to.
Similar threads
