where can i get a rear exhaust box that will fit my 95 4.0 se

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
al-one-arm

al-one-arm

Well-Known Member
Posts
409
Location
burnham-on-sea,somerset
hi all, my rear box is rotted out, i bought a new one from britpart,esr 3538 it will not fit my car. the new one is a tilted oblong one, which hits the lpg filler pipe. the old one is like 2 boxes joined together, one small one large, same design as the rear box on a double box setup.
any suggestions, i will put up pictures when i can.
alan
wrong back box.jpg
s-l1600.jpg
 
Last edited:
i bought it on the internet years ago, as a standard item
neither of those pictures show the outlet pipe right, its straight out ,oblong,about 4" across and 2 1/2" high
exhaust 013.jpg
 

Attachments

  • exhaust 013.jpg
    exhaust 013.jpg
    142.8 KB · Views: 282
Last edited:
Looking at LRcat's picture it looks like the photo you've posted & nothing like the Britpart one you show in your first post. Item 1 in this link.
http://new.lrcat.com/#!/1234/91104/91120/7207

Searching ESR3538 brings up some that look like the bp one & some like the one in your photograph of the actual one.
If it just fouls the LPG pipe but would fit otherwise then I'd suggest you either need to search for one like the current one - best to speak to suppliers first - or move the LPG pipe.

Britcar picture several all as ESR3538, the box shape appearing to be the difference & the prices are somewhat varied! I wonder if there has been a slight redesign of the pattern ones to simplify production & keep the cost down?
https://www.brit-car.co.uk/product....silencer_cat_p38_new_range_rover_up_to_vin_va
 
Last edited:
note quite, but mine is identicle to the back box on the other picture ho2
looks like ho1 is for a deisel and ho2 is for a v8 petrol
what is the part number for that back box on ho2 picture? please
 
Possible I'd amended my post as you were doing your answer as I'd initially put the LRcat diesel result!.
To be sure you get the right shaped box using ESR3538 you'll need to speak to the suppliers - if you use Brit-car you can go on their pics. I've used them for a number of parts & found them easy to deal with.
To use & get part numbers off LRcat just left click on the pic of your model RR, then select the appropriate section & click on the digit shown against each part might take a couple of seconds for each to show:
http://new.lrcat.com/
 
tried britcar, maybe because its sunday, no reply on the chat line. clicked contact us, sent an e-mail, its just been returned, tried phone number, no connection
 
Last edited:
I got my last exhaust from Land Rover, but you could always get an aftermarket stainless steel item which has smaller back boxes.
 
brilliant. i have been in touch with BRITCAR and they were excellent, they took a photo of the exhaust in their stock , matched my car exactly, so have ordered/paid , and should be with me tommorrow, cost £99.95 +vat plus £25 carriage, total £ 149.94, highly recommended service.
 
You must log in or register to reply here.

Similar threads

IandiscoV8
restarting my D1 V8 project - been a while!!
Replies
17
Views
2K
IandiscoV8
IandiscoV8
300bhp/ton
Driven: New Defender - On & Off Road. Is it a Pretender?
2
Replies
29
Views
5K
tottot
tottot
PastyMuncher83
P38A 4.0 THOR LPG - BRC SEQUENTIAL 56 COMMS
Replies
3
Views
910
saxavordian
saxavordian
M
4.4 M62 Rocker gaskets
Replies
4
Views
7K
Herald
H
H
Can i fit a Diesel rear silencer on a petrol P38
Replies
1
Views
1K
wammers
wammers
Back
Top