wheel on bonnet

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Personally I don't like spare wheels fitted to land rovers on the bonnets and I am not keen on having it on the back door either but as mine is a county and has all the 4 back seats fitted it will have to stay on the back door unless I remove the front rear seats and fit the spare to the rear bulkhead but then I would only have 4 seats altogether as there is a cubby box fitted in the front :(
 
Mine is on the bonnet, I am 6'1'' and I find it fine. It only obscures the front left hand edge of the bonnet as your sat in the drivers seat.

Take it off if you are doing anything more than an oil check though. Mine tried to kill me!!!
 
I had wheel mounted on bonnet was a right nuisance it destroyed the bonnet and if a kid was standing in front you would not see it, I got rid and put it in the back
 
Martyn was size was your wheel that it would stop you seeing kids in front :eek:

I'll take a pic of my view when I go out and you can see what I see. I love having it on the bonnet and wouldn't have it anywhere else now
 
mines up front anorl, much better there imo, can still see the nearside corner, looks/feels wrong when its not on.
Mines a 235/85 too, and I'm 6'
Only way it destroys the bonnet is if you drop it down, put it down and its fine. the mount kits also have a stiffener plate to go on the underside of the bonnet.
I found it a blessing in some ways, means the wind cant lift the bonnet to slam it on yer head if youve got one of the scissor stays. :D
 
Not the greatest pic as my phone doesn't have a very wide field of vision but you get the idea. Will try and get a better pic later
 

Attachments

  • uploadfromtaptalk1392973346933.jpg
    uploadfromtaptalk1392973346933.jpg
    71.3 KB · Views: 238
Iv got my 235/85/16 on the bonnet of my 110. It does block part of the front and side view but you soon get used to that.

Because its heavy I fitted a second bonnet strut/stay. I'm 5ft 11 so being able to see was ok for me, but my wife who drives now and again is a lot shorter.

So only because the wife wants to drive I fitted some alloy box section under the seats now raising them by about an inch, making seeing over the top good for the wife and really easy for me.

Seat raisers can be purchased from exmore trim etc, but are costly, so I made mine for just under £10 to do both the front seats.

Iv got some pics of my seat raisers if any one wants to see them.
 
You dont need the rubber buffers on as the tyre itself is rubber ! and so sits ok . The bonnets after 110/90 (ie defender) are not as robust . The option was not there on td5 due clearance to engine issues. Use the bracing kit and should be OK as long as not using on bush tracks, corrugations, etc . When the later bonnets have a tendency to split . Yes more aerodynamic as previous post . I found that going above 265/75 starts to be intrusive . (5'11") . so only run with 285/75 on back door in UK . Scissor prop type changed to solid type land rover advise HTSH
 
tacr2man said:
You dont need the rubber buffers on as the tyre itself is rubber ! and so sits ok . The bonnets after 110/90 (ie defender) are not as robust . The option was not there on td5 due clearance to engine issues. Use the bracing kit and should be OK as long as not using on bush tracks, corrugations, etc . When the later bonnets have a tendency to split . Yes more aerodynamic as previous post . I found that going above 265/75 starts to be intrusive . (5'11") . so only run with 285/75 on back door in UK . Scissor prop type changed to solid type land rover advise HTSH
Click to expand...

yes deffo change from a scissor prop to a solid bar.

as for the buffers, i have run both with and without, i prefer with as you can tighten the wheel down onto them and it is less wobbly off road as it were
 
flat said:
yes deffo change from a scissor prop to a solid bar.

as for the buffers, i have run both with and without, i prefer with as you can tighten the wheel down onto them and it is less wobbly off road as it were
Click to expand...

It may be down to tyre size you were running or type of bonnet mount that you had :)

the 1 ton series (with wider/bigger tyres) used a version of the station wagon rear door mount on the bonnet BTW
 
You must log in or register to reply here.

Similar threads

Brenda__the__Defender
Advice on Tyre choice please!
Replies
14
Views
1K
Brenda__the__Defender
Brenda__the__Defender
L
Mantec Swing Away Wheel Carrier Parts
Replies
0
Views
616
Lumby84
L
T
Any problems changing from 265/75/16 on disco 1 alloys to 235/85/16 or 7.5 r16 on steels?
Replies
3
Views
728
Dr Strangeglove
D
L
Tow hitch height versus horse box issue (Defender 110 2011)
Replies
16
Views
2K
Wagon Loon
Wagon Loon
J
Bonnet release cable guard clip
Replies
3
Views
1K
KISSMYAURA
KISSMYAURA
Back
Top