Wheel balancing

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
nickjaxe said:
When breaking the bead...go all around the bead in small chunks...putting lube in the gap as you go.
Nick.
Click to expand...
That's a good tip, and something I was doing wrong at the start. I was thinking I just needed to get the bead over the ridge in one place, and it would 'fall off', but I then discovered that rotating the tyre a bit certainly helped it go a lot more easily. The other 2 were a *lot* easier than the first one I did, and I'm confident the fourth will be just as easy now I know what I'm doing. :)
 
If your trying to inflate just kick the rim into the tyre....and when your airline is on gentle pressure on the side of the wheel the rush of air will plop the bead outwards.

I presume you have a compressor.
 
"there's a reason that tubeless rims evolved to include the ridge"
You would think so would you not....tubed rims dont have them....silly inst it...it a tubed tyre has a rapid deflation....it will behave just like a tubeless tyre.
 
I think one reason for the ridge was that they feared tubeless tyres would have a sudden deflation if you kirbed them and knocked the bead over. How much of a problem that is I have no idea.
 
Judging by the way he was scraping his shiny allow around on the concrete, he wasn't particularly bothered about damaging the rim edge! That really made me cringe. :eek:

The one thing he did that might have been useful was to put the soapy water around the bead before trying to remove it. I guess there's an argument that until the bead is broken, the water isn't going to get anywhere where it'll help, but it probably won't make anything worse. I used proper tyre lube when refitting the tyres, and that did help the bead move a lot more easily. His method of breaking the bead wasn't too dissimilar to jacking up the Landy with the foot of the jack in the sidewall...but with less control.

The biggest difference between I saw here, however, was that his tyre (tire) is a LOT softer than the mud plugger tyres I had/have. The sidewalls on mine were *really* stiff (particularly the old ones), and it was a lot more of a challenge to remove/refit than it was for him. Next time, I'll make sure I'll buy tyres with a softer sidewall. :D
 
You must log in or register to reply here.

Similar threads

G
Metal buried in tyre carcass ?
Replies
10
Views
423
kevstar
kevstar
R
Series 3 Original tyre sizes?
Replies
6
Views
850
grewth
G
F
Series 2 205/55/16 tyres on S2 1965?
Replies
8
Views
665
FinectiePhil
F
MonkeyLander
Getting AT tyres, best wheel size?
Replies
5
Views
575
Arctic2
Arctic2
lightning
For Sale Five new steel wheels with tyres for the new Defender L663
Replies
0
Views
390
lightning
lightning
Back
Top