What thickness of Plywood for sleeping platform

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Vinnie110

Vinnie110

Member
Posts
93
As it says.

Looking to build a sleeping platform to sit just below the rear windows in the 110.

Was first planing a cover only so light weight then thought why not make it so I can sleep on it.

So would 6.5mm be ok with a support by each wheel box or do I need thicker 9mm?

It will be in sections, 3 I think running across the width. These can then be lifted and slid to give access below.
 
90boy said:
i would go for 9mm if not 12mm, 6mm would not hold you
Click to expand...

would go for 18mm myself bit late when yer fast asleep and go through bugger in the night :eek: we use 18mm shuttering ply for fibreglass flat roofs and would'nt want to span any more than 400/450mm with it ;)
plus the weight differance is not that great between 12 & 18mm
 
18mm thick with support in the middle or you could screw some 2x4 battens along the base to prevent bowing spaced out at 400mm
 
Cheers guys. My thinking on thinner ply was a trailer tent my parents had when I was a kid the fold out bed was thin. Piano hinge to the body and then just 3 legs to support the other side. That was double bed size.

But thinking now it had fixed support. If I want to drop in takeout then need thinker stock or more support.

Thanks again. Once I get it sorted I will post some pics.
 
You must log in or register to reply here.

Similar threads

ER1C
For Sale CAR RAMPS [sold]
Replies
0
Views
474
ER1C
ER1C
K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
xDParis64
Freelander 1 Converting from wasted spark to distributor (or Visa Versa)
Replies
0
Views
362
xDParis64
xDParis64
dag019
Hypothetical project feasibility
Replies
17
Views
2K
FlyingPete
FlyingPete
Blob
L322 Solved - C1A13-64 (AF) Pressure does not decrease when venting gallery
Replies
2
Views
3K
stuu
stuu
Back
Top