What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
I've gone a little further with my assault on stiffness and uneveness in the steering. I've put a new flexible section of steering column on.
IMG_0242[1].JPG

Although the old one felt OK when it was on the car, once it was off the problem became apparent. If it is flexed to full extent the bottom joint can be made to lock up solid. Feels a bit like the effect you get if a roller has broken up. Once the new one was on it all felt better, so I've got rid of the grunchiness (which seems to have been in the top bearing of the steering column) and the uneven feeling, which must have been the bottom universal joint. Plus the flexible rubber joint was looking a bit perished, so it is better to have a new one on. I think I'm nearly MOT ready now.
 
I've taken the spare wheel off the bonnet and chucked it in the back in the hope that the reduced weight at the front will make the steering a bit lighter. Every mickle makes a muckle and all that.
 
Been over to Wales at the weekend:
routeout.jpg
Had a bit of a drive around once I was there:
sat.jpg


And saw some derelict buildings:
DSC08704.JPG

Or rather, we went for a walk and admired the countryside with everything just coming into leaf, babbling brooks and mossy branches
DSC08711.JPG
 
Off to the MOT this morning. It passed with no advisories. It's not due 'til the 5th of June but I thought I'd try and squeeze it in before the rules changed. It'll probably be OK under the new regime, but it's easiest to work to rules you're familiar with.
 
As I was draining the sump yesterday I thought I'd have a look behind the inspection nut next door in the bell housing
Poked my finger up there :rolleyes: and found these..

Capture.GIF

Whatever it was I think used to be around 25mm dia. One side smooth, the other sheared.

Any ideas? Everything seems to be working fine.
 
Took some pics of where I am (still) with it, and one small reason why it's taking so long .. ;)
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
629
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
910
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
552
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
988
invisible999
I
Back
Top