What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Well I've cut card to the shape of the two different bits of roof visible over the front cab and cut 4 pieces of sound proofing/high density foam to fit. I've fitted two pieces and test fitted one of the side bits. Once all eight are in place I can do 4 pieces in the van section then above the safari door with ali to match what is lower then my roof will be smooth enough for one complete sheet of material and a covering of thin carpet like lining which should give me a nice roof lining. Then when the van panels are replaced by the window panels I just need to do that bit too.
 
200 said:
Today i have made and fitted my steering guard and changed the rear a frame ball joint.


IMG_1237.jpg



IMG_1238.jpg
Click to expand...

I bet the chassis would bend before that, looks great :D
 
Adjusted the diaphragm on the fuel pump properly to suit the allisport intercooler and new waste gate feed position (on the inlet manifold)... Wow what a difference, pulls like a train now, even with the discovery transfer box and 265/75 M/T's. Only a bit of black smoke at full tilt :D
 
Dave90 said:
Adjusted the diaphragm on the fuel pump properly to suit the allisport intercooler and new waste gate feed position (on the inlet manifold)... Wow what a difference, pulls like a train now, even with the discovery transfer box and 265/75 M/T's. Only a bit of black smoke at full tilt :D
Click to expand...

You know what they say, No smoke no poke :p:D
 
Nothing on mine but attempted to fit disc's and pads to the back of my brothers 110.
Soon went to **** when the caliper bolts were mangled :mad:, Got them out in the end and then got dark. So have to finish them in the morning.
 
aaronmorris said:
You know what they say, No smoke no poke :p:D
Click to expand...

I had to make it smoke a bit, Best saying ever :D But on a serious note it really does shift low down, and now thanks to the disco transfer box I'm not changing gear all the time. I get between about 5mph extra each gear, makes a difference :)
 
The first job of the day was to get Mary my series III 109 into the garage,not as easy has you think with all the wood for the stove that was in there.
Then I removed the turbo from Mary, she is fitted with a 19J engine that was smoking like a world war two destroyer, I also droped the oil.
 
200 said:
Today i have made and fitted my steering guard and changed the rear a frame ball joint.


IMG_1237.jpg



IMG_1238.jpg
Click to expand...
how have I not found out you can make stuff like this :eek:

bellowhead said:
The first job of the day was to get Mary my series III 109 into the garage,not as easy has you think with all the wood for the stove that was in there.
Then I removed the turbo from Mary, she is fitted with a 19J engine that was smoking like a world war two destroyer, I also droped the oil.
Click to expand...

:nopics:
 
That's it I have had enough. I have changed three thermostats and just about to change my third engine temp sender unit. All came in the famous blue box. Going for a better quality one this time round.
 
Amphermiser said:
Ha ha,
It is the guide system that will allow the spring hangers to move up and down 500mm, when I want to raise the axel to reduce drag etc...
Take a look at the rest of my photos and it might explain my mods more. Lol:D
Click to expand...


.......puts my removal of front o/s brake line into perspective.......


:eek:
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
629
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
910
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
554
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
988
invisible999
I
Back
Top