What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
had back floor sponge up on girlfriends D1 200 type V8 and painted it with engine oil to scare the rust goblins away , attempted to fit a transit electric fan (failed,lack of space) , buggered around with wiring
 
The 98 300tdi auto Disco has decided to be difficult to start on these now chilly mornings. Put a new set of glow plugs at the weekend, made no difference at all. Read many, many threads about potential cause and fixes for this prob. Brain overload. Put a bottle of injector cleaner in the tank, gotta start somewhere I suppose..

Drove the 200tdi Disco to work, on thw way home admired the excellence of a fully function & illuminated instrument cluster. #tips_hat_to landowner

IMAG0591_zps33074c3e.jpg
 
Found the cause of the bouncey ride since the left rear spring dislocated. Best order a new one. And plumbed in the boost gauge, 11 psi.

20131209_200112.jpg
[/URL][/IMG]

20131209_200122.jpg
[/URL][/IMG]
 
Replaced my glow plugs, first three went fine, last one snapped on me :( Ive bypassed it for now, anyone know of a good way to get them out without taking the dam head off?

Also, nipping down to the garage later so a friend can slap some gasket sealant on my nearside rear hub as its leaking after a wheel bearing change :)
 
a2dds said:
Replaced my glow plugs, first three went fine, last one snapped on me :( Ive bypassed it for now, anyone know of a good way to get them out without taking the dam head off?

Also, nipping down to the garage later so a friend can slap some gasket sealant on my nearside rear hub as its leaking after a wheel bearing change :)
Click to expand...

Got a pic of whats left mate?

Heat works well
 
Last edited:
If its a steel piece at the top you could build up a series of welds until you have enough to get a good sized extractor on there or keep welding a stalk, put a nut round it then weld the stalk to the nut and use a 6pt socket
 
Dr_evil said:
If its a steel piece at the top you could build up a series of welds until you have enough to get a good sized extractor on there or keep welding a stalk, put a nut round it then weld the stalk to the nut and use a 6pt socket
Click to expand...

As for the welding option, I have heard of this before, but I don't have a welder available to me so would be difficult :/
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
631
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
911
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
560
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
988
invisible999
I
Back
Top