What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
To do this one we started by using a gasket to mark the steel, drilled the holes for the block then bolted it up before cutting and tacking the inlet pipes on :)

Be more to come but probably after christmas now as I'm doing chassis work and he's got a few of his own bits to do
 
Dr_evil said:
To do this one we started by using a gasket to mark the steel, drilled the holes for the block then bolted it up before cutting and tacking the inlet pipes on :)

Be more to come but probably after christmas now as I'm doing chassis work and he's got a few of his own bits to do
Click to expand...

This would make an interesting thread in it's own right. Do you fancy doing that as I'd be interested in seeing it.

Thanks.
 
Theres a few pics on my 429 build thread I'll copy it over












Dr_evil said:
Inlet manifolds starting to be cut :D



1489244_729787717033054_1612755130_n.jpg

1469941_729787807033045_1837528646_n.jpg

1486739_729787843699708_939246909_n.jpg



Bellhousing does fit the dowels




1465376_729787763699716_741387640_n.jpg





Manifold starting to take shape :D



1472813_729787887033037_1766052910_n.jpg





Engines home too! Was a bit awkward with it in the car but its back



1479508_729787240366435_822062139_n.jpg

1471083_729787277033098_1197914629_n.jpg

1486825_729787317033094_422140239_n.jpg
Click to expand...
 
I've done nothing to mine.

The fan belt I ordered on the 10th, and that was coming by 24 hr courier, still isn't here yet.:mad::mad::mad:

I did order a new rocker cover gasket and idler pulley bearing to repair the fubar'd idler pulley that I've just replaced though.
 
Fitted my inverse dislocation cones. Terrafirma ones being sold by a company on eBay for £35 as opposed to £58 from there direct store. Not too bad to fit, be even easier of they sent you enough nuts and bolts.
 
took the dash to pieces to fix the wipers on my 90.

Now i've got an assortment of screws (including brass wood screws) nuts, bolts and washers which i've gotta try and figga out where they go...

Wiper work thou. :D
 
I've done a couple of tiny jobs on mine that I've been intending to do for a while. I put some rivnut captive nuts in to bolt my cubby box down with, as the original ones weren't in the right place and I've put some in to hold the seatbox centre hatch down too as it was held in by self tapping screws into spring clip nuts previously. Now the whole thing is firm enough for people to use it as a handle to lever themselves into the vehicle, which they tend to do. Also adjusted my handbrake now that he new mechanism has had a chance to bed in. The handbrake is on with the Land Rover official manual recommended three clicks now. Tomorrow I might have a look at a small oil leak in the engine bay which I think is coming from the rear of the rocker cover. I'll take it off and stick it all down with gasket sealant.
 
Attempted change the front shocks and springs yesterday but gave up because I didn't have the grinder :mad: so went along some local lanes after the last few days of rain there all a bit sloppy. Glad I bought new tyres already.
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
814
BEASTIE 90
B
MinionKing
Freelander 2 (LR2) Freelander 2 Torque pull
Replies
11
Views
541
coltron1
C
stumpyj
TD5 Fuel line to fuel pump clip
Replies
9
Views
1K
tilly2
tilly2
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
921
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
1K
Knappster
Knappster
Back
Top