What have you done to your Landie today.

AJC · Nov 17, 2013

Today I pick up my new Disco

discomark10 · Nov 17, 2013

:nopics:

AJC said:
Today I pick up my new Disco

timberjock · Nov 17, 2013

fitted a new crankcase breather pipe. Hopefully now the oil should stay in the engine

Shoreline · Nov 17, 2013

Started it, finally got it going after a full engine rebuild, nice feeling. Now need to replace two front air bags and MOT it

MrMayze · Nov 17, 2013

Made and welded in repair pannels for the inner arch of my Disco, thought it was only going to need a patch.

Wrong

Also changed the glow plug that was hiding behind the air con pump.

Amphermiser · Nov 17, 2013

Today I spent two hours, stripping down the hydraulic pack hull down again, and replaced the float switch. Then the new one packed up too. Aaaaaaaaa some days I cant win!

nrgserv · Nov 17, 2013

Amphermiser said:
Today I spent two hours, stripping down the hydraulic pack hull down again, and replaced the float switch. Then the new one packed up too. Aaaaaaaaa some days I cant win!

and for those that aint seen yer thread, will have no idea lol :lol:

Amphermiser · Nov 17, 2013

True lol. Oh for a simple landy again........!

UndergroundFrog · Nov 17, 2013

Rear door wouldn't open, stripped out inner door panel lubricated moving parts and bingo all sorted.
Tried to see why front parking sensors wouldn't work, only to find I don't have any,lol

andy85 · Nov 17, 2013

Well,not so much today,but ALL this weekend.
Pas Pipes and crank pulley on my td5.

joojar · Nov 18, 2013

Fitted new Td5 water pump, and new top hose to replace the one that heat-failed (old one was 1.5 yr old Britpart). This time I used the spring clips that came with it, having realised that Jubilees don't do heat compensation

Then changed oil and filters, then overhauled rear prop

UJ's went nice and easy, but getting out the old centring bush at the rubber donut end was one hell of a fight. Broke my new slide hammer, blowtorch also failed, so I just hacksawed it then belted it out with hammer and old screwdriver. Satisfying

Dragonwalker · Nov 18, 2013

Checked the oils and fluids.

All good.

discomark10 · Nov 18, 2013

Any one know what size disco door speakers are?

KeepDigging · Nov 18, 2013

Took the sill panels off to see how metal was left (answer: I've seen worse but they still need welding).

Disco retaliated by killing the battery.
(It was on borrowed time anyway, that battery).

landowner · Nov 18, 2013

Popped an engine in the empty engine bay

Starting to fix it all in tomorrow

Dr_evil · Nov 19, 2013

got its new V8

90TD5 · Nov 19, 2013

Removed the centre box. Sounds awesome. S

landowner · Nov 19, 2013

Not much , managed to get gearbox mounts lined up and bolted to chassis.
Handbrake tomorrow, see what fits and what doesn't,

Muddygamekeeper · Nov 20, 2013

Serviced it.

Took out the rear seats, am stuck on taking out the seat belts, looks like a massive T something screw head. Pain.

Brown · Nov 20, 2013

I drove it to Nottingham and back and kept looking for faults with the Nanocom. No new ones showed themselves so I seem to have got rid of "15.2 high speed crank (logged)" for the time being, as a result of changing the crank sensor. In addition I think the cylinder balance has improved - the values were getting rather high, especially on deceleration/overrun, but now they're pretty close to zero, and only very occasionally do you see anything as high as a 4. So that's an improvement.

What have you done to your Landie today.

Active Member

Well-Known Member

Active Member

New Member

Active Member

Active Member

Well-Known Member

Active Member

New Member

Active Member

Active Member

Well-Known Member

Well-Known Member

New Member

Pensioner Pete

Attachments

Banned

New Member

Pensioner Pete

Member

Well-Known Member

Similar threads