What have you done to your Landie today.

Freediscoranger · Oct 22, 2011

replaced the UJ's on the front prop, fitted some 265/75 r16 BFG AT's now getting an odd clunking noise when rolling along at about 4 mph

still getting the noise as if the UJ's have gone despite all being okay. still getting a loud noise when turning left despite new front wheel bearings

Simplyoliy · Oct 23, 2011

Off to spend some time lying underneath. Stripping back the chassis for fresh paint/waxoyl. Using some rusteater to try and clean things up. Then wheels off to check hubs and brakes, as i think they'll need done some time soon.
And since its semi dry better now than in the ****ing rain!

chezvegas · Oct 23, 2011

Replaced the brake fluid, hopefully the brakes will be a bit better than just sticking my feet through the floor!

crookedspireite · Oct 23, 2011

fixed my diff lock light and polybushed my rear end

The Mad Hat Man · Oct 23, 2011

replaced the rear body mount bolts.
fitted rear bump stops (new bolts)
fitted 1" spacers to rear suspension.
schultzed over the welding of last weekend.
primered and first top coat on rear wheel arch repair.
started to look at front inner wings.

:bolt:

Fur Trapper · Oct 23, 2011

The Mad Hat Man said:
replaced the rear body mount bolts.
fitted rear bump stops (new bolts)
fitted 1" spacers to rear suspension.
schultzed over the welding of last weekend.
primered and first top coat on rear wheel arch repair.
started to look at front inner wings. :bolt:

You know the :rulez:

:nopics:

The Mad Hat Man · Oct 23, 2011

gimme a chance - i only came in 10 mins ago and am having tea.

Headtester · Oct 23, 2011

The Mad Hat Man said:
changed the rear bump stops.

or, more precisely, fitted some on there, as there was only the backing plate attached

Where did you get them from Mad? - I need to fit some to my Disco II

Fur Trapper · Oct 23, 2011

The Mad Hat Man said:
gimme a chance - i only came in 10 mins ago and am having tea.

I've seen you give peeps less than 2 minutes more grief

so put the tea down

Simplyoliy · Oct 23, 2011

Managed to get the engine to **** oil everywhere! Removed the breather pipe from the air intake (19J engine) Stuck it with a bottle to catch any oil, didn't realise i needed a hole in the bottle to let the pressure back out

.
So after ****ing a chunk of oil out. I cut a hole in the bottle and problem fixed!

Also took off the front wheels and cleaned up everything inside the arches and painted them. Chassis is half painted, but all preped. to be finished during the week.

The Mad Hat Man · Oct 23, 2011

OK pics for ya.

26107d1319395130-what-have-you-done-your-landie-today-img_1415.jpg

26109d1319395130-what-have-you-done-your-landie-today-img_1420.jpg

26110d1319395130-what-have-you-done-your-landie-today-img_1424.jpg

26111d1319395130-what-have-you-done-your-landie-today-img_1419.jpg

ratty · Oct 23, 2011

Yesterday I drove mine back from the Isle of widget and then let the ballast drive it home from work after I picked up the truck and the chav box..

Today I let it have a rest and walked past it twice.

gemsdad · Oct 23, 2011

Series71 said:
Took the series for an MOT and it passed with 1 advisory on the exhaust !!!!!

exhaust advisory,perhaps they would like you to get one.

:mooning::behindsofa:

ratty · Oct 23, 2011

gemsdad said:
exhaust advisory,perhaps they would like you to get one.:mooning::behindsofa:

I think it was a typo and should've read 'exhaustive advisory list'.

gemsdad · Oct 23, 2011

ratty said:
I think it was a typo and should've read 'exhaustive advisory list'.

that sounds more like it.

gemsdad · Oct 23, 2011

The Mad Hat Man said:
ere Gems - can yu PM me yo courier, please?

pm sent.

Karlos28 · Oct 23, 2011

waxoyled mine and a mates up to the nines... ready for the salt that they have already started spreading!

The Mad Hat Man · Oct 23, 2011

Karlos28 · Oct 23, 2011

oh, and welded the other side of my bulk head up.. no more frozen hands for me!

buckshot · Oct 24, 2011

put the second pair of bfg m/t on the old 90 and fitted 1 of the pair of 2" lift spacers on the back springs

over the weekend made and fitted a couple front mud flaps on the 110

What have you done to your Landie today.

Active Member

Member

Active Member

New Member

Well-Known Member

Banned

Well-Known Member

Active Member

Banned

Member

Well-Known Member

Attachments

I'm not special I'm limited edition

NOT BOTHERED.

I'm not special I'm limited edition

NOT BOTHERED.

NOT BOTHERED.

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads