danchapman2k2
Well-Known Member
- Posts
- 1,097
- Location
- Writtle, Essex
done my first big job of the landy! Took starter motor out as it was sticking cleaned her up took the rust off wd40'd her up and shes like new!
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
I'm working in the power station because it's part of the same station that I'm based at, Dinorwig in Llanberis
I know
I was living in Tan Y Gris when the company was taken over. have been to dinorwic but not done the tour. Sight of all that copper would have been too much for me nerves.. 
chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
Tan-Y-Grisiau in the Old Chapel. have done some work for him.
Cool. Moving stuff? He has a load of stuff up near belvoir now i think and in forest of dean. Awesome stuff. I bump into him at family get togethers, funerals etc. Think i got my love of working with natural wood from him
Got a sheet of 18mm exterior plywood and made a small bracket that attaches just under the sliding windows, I'll get some more detailed pictures tomorrow, and some basic dimensions if you want?
Ya breaker bar is too big
Because me and my dad are such awesome carpenters :tea: we made the inside of it 18"x15" and the breaker bar fit's perfectly across
The breaker bar just moved because of the massive G-force that is generated in transit
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
danchapman2k2
Well-Known Member
- Posts
- 1,097
- Location
- Writtle, Essex
Got a sheet of 18mm exterior plywood and made a small bracket that attaches just under the sliding windows, I'll get some more detailed pictures tomorrow, and some basic dimensions if you want?
Because me and my dad are such awesome carpenters :tea: we made the inside of it 18"x15" and the breaker bar fit's perfectly across
if you could pm me any information you have that would be superb pal
thankyou
I know
Ah right, small word eh?
The companies been taken over again, by GDF Suez, a French company ...
chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
Fixing a leaky tap and plumbing a washing machine in
Ah. You get about!
Trewey
Cockernee, Pasty munchin bastid.
- Posts
- 20,088
- Location
- Kernow - Near England
Just fitted the big fook-off roof box, ready fer us ollerdee!
- Posts
- 14,902
- Location
- Doncaster
Bright sunlight, lovely morning, just got in after watching and helping niece at a local show, she got a third and a 1st, but I had to come away earlier, so as it looked set fair thought I'd get the Disco up on axle stands, remove all wheels and fettle ****e ...
Rear axle up OK, front passenger side it started to drip with rain .. moved to front drivers and a feckin' cloudburst! Got it up on all four and bolted for the door!
That was 10 minutes ago, it's now hot sunshine again .. with a dirty great black cloud just showing set to pour it down again!
Love our weather, wish I had a dry barn, and a four post lift!
Rear axle up OK, front passenger side it started to drip with rain .. moved to front drivers and a feckin' cloudburst! Got it up on all four and bolted for the door!
That was 10 minutes ago, it's now hot sunshine again .. with a dirty great black cloud just showing set to pour it down again!
Love our weather, wish I had a dry barn, and a four post lift!
bencorkill
Well-Known Member
- Posts
- 2,426
- Location
- barnet , north london
Tried to change track rod ends! Only 1 of the 4 would come out , and noticed that one of the steering rods is bent, had to order a new steering rod set from paddocks, and it comes with track rod ends when i have already purchased a set oh well all fun and games, guess im cycling to work until the steering rod set arrive
, and noticed that one of the steering rods is bent, had to order a new steering rod set from paddocks, and it comes with track rod ends when i have already purchased a set oh well all fun and games, guess im cycling to work until the steering rod set arrive 
Silverlandy
3.5efi's other half
- Posts
- 5,707
- Location
- Suffolk
Wired up the horse trailer camera to the Landy ready for a trip to Newmarket on Tuesday and fuse 15 is holding out...not blown yet so obviously haven't triggered something to make it blow as I need the cigar lighter to power the LCD screen, however, I have 18 fuses in my glovebox on standby!
auf_wiedersehen_pet
Well-Known Member
- Posts
- 2,456
- Location
- The Solent
Fitted an Allisport header tank after mine expoded in a spectacular fashion on Tuesday!!
Andy Land
Well-Known Member
- Posts
- 4,499
- Location
- ... en route to Cuckoosville.
Gave the underside a jet wash ready for tomorrows wire brush and waxoyling day ... love this job but gotta be done
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Fitted my fuel filter fuel pump and
Hoses to the trialer need to do up the pump securing bolt but seems job is a goodun!
Will hopefully tomorro solder ( nothing worse than a dodgy Luca terminal intermittent connection on a fuel pump) new wires and run the earth directly to the battery and the fuel pump to the switch no joints all soldered!
Need to secure the fuel line along top of chassis rail every 100mm ready for engine fitment!!
Hoses to the trialer need to do up the pump securing bolt but seems job is a goodun!
Will hopefully tomorro solder ( nothing worse than a dodgy Luca terminal intermittent connection on a fuel pump) new wires and run the earth directly to the battery and the fuel pump to the switch no joints all soldered!
Need to secure the fuel line along top of chassis rail every 100mm ready for engine fitment!!
