ant.7
Active Member
- Posts
- 213
- Location
- gatley, cheshire
Fitted new rear drop links
Gave her some new oil and filters
She's purring!!!
Gave her some new oil and filters
She's purring!!!
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
m0jpm
New Member
- Posts
- 1
- Location
- North London
Hi Jason, that aerial seems a bit low to me, and not just that, you have a good chance that the positive (the whole aerial) will short with the body as that is the ground plane. You might not have a problem now but when you off roading and the aerial springs about and knocks the powder coating off the problems might start occurring. Plus If you want the full potential of your aerial it should be mounted as high as possible.
not criticizing mate just some good advice.
regards Jan m0jpm
not criticizing mate just some good advice.
regards Jan m0jpm
THE BUDDAH
New Member
- Posts
- 686
- Location
- Romford essex
I carried out stage 2 of my disco1 project,
See Discovery forum.
See Discovery forum.
Replaced my leak off pipes then for some strange reason tried to bleed my clutch system in the vain hope that my clutch fluid was being stolen by pixies and not the slave cylinder, yes it was the slave cyl .... After removing slave cyl I couldn't help myself but put my fingers in a dark hole .... The bell housing feels like it is full of muck and **** dowsed in old clutch fluid is the best way to wash it out with brake cleaner as thought that wouldn't contaminate clutch etc....
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
The desert is private property and belongs to the coalboard. (IIRC.) Driving on land not forming Part of a public highway, is an offence under the Road Traffic Act. (Unless you have the express permission of the Land Owner) The Desert's status has been discussed on just about every 4x4 & trialsbikesforum in the UK. The golfcourse has had a continuing campaign to get anyone using the desert, prosecuted. andalong with the local council have paid the police to patrol the desert. Plod mounts special patrols all the time.
If some BusyBody sends em a link to the vid you posted You could find yourself with a section 59 notice. On top of that it makes this forum look bad if we are seen to be condoning illegal offroading. As to the Criminal damage. Creating or deepening the ruts is criminal damage, in the eyes of plod.
- Posts
- 83,282
- Location
- Embasinga stocæ
Attachments
chunkymunky
New Member
- Posts
- 9,901
- Location
- worcestershire
Doh
Clanforbes
New Member
- Posts
- 1,503
- Location
- Perthshire
It wouldn't be the first time someone has been prosecuted from video posted to you tube!
jamesmartin
Well-Known Member
- Posts
- 91,879
- Location
- louth lincs
if you had seen her ,you know why so many complained
danchapman2k2
Well-Known Member
- Posts
- 1,097
- Location
- Writtle, Essex
There are TONS of vids on YouTube about this place!
landrover11019
Active Member
- Posts
- 852
- Location
- essex
Fitted a 52mm clock I bought at a MV show for £5, bargin!!
skint-as-usual
Not a well Known Member - with no likes
- Posts
- 2,411
- Location
- County Durham
I have been doing more electrics.
Worked out why hazards and fag lighter stopped working over the weekend - 10A fuse :doh:
Working my way all over the 90 - previous owners / whatever seem to have snipped wires at random, left them lying about. I started with the battery and moved into the engine bay at first. Example being I had a red wire terminated on the battery going some where. WTF is this? - turned out nothing, just was clipped off in the engine bay. Ah, good prospect for a short.
I am also seeing ****e cable joins. Attached image a good example of the state in the 90 (well if I could drive this fully automatic camera it would be: rear near side light wireing); Top - joins of twisted bare copper wrapped in insulation tape, Middle - number plate light feed fell out when I touched it, Bottom - showing cables clipped and left lying loose with no end protection (believe me end protection can be important - I have a daughter to show for the fact).
>>>START RANT<<<
:5brant:
DO NOT get me started on the soldering.
If you are going to solder on a 90 that one day will be mine then at least go on a training course and learn how to solder propperly.
Blobby
Dry
On verdigris
More - RANT
When doing electrics when you have finished I do not want to see any bare copper or bare metals of connectors.
OK
:5brant:
>>RANT OVER<<<
Worked out why hazards and fag lighter stopped working over the weekend - 10A fuse :doh:
Working my way all over the 90 - previous owners / whatever seem to have snipped wires at random, left them lying about. I started with the battery and moved into the engine bay at first. Example being I had a red wire terminated on the battery going some where. WTF is this? - turned out nothing, just was clipped off in the engine bay. Ah, good prospect for a short.
I am also seeing ****e cable joins. Attached image a good example of the state in the 90 (well if I could drive this fully automatic camera it would be: rear near side light wireing); Top - joins of twisted bare copper wrapped in insulation tape, Middle - number plate light feed fell out when I touched it, Bottom - showing cables clipped and left lying loose with no end protection (believe me end protection can be important - I have a daughter to show for the fact).
>>>START RANT<<<
:5brant:
DO NOT get me started on the soldering.
If you are going to solder on a 90 that one day will be mine then at least go on a training course and learn how to solder propperly.
Blobby
Dry
On verdigris
More - RANT
When doing electrics when you have finished I do not want to see any bare copper or bare metals of connectors.
OK
:5brant:
>>RANT OVER<<<
Attachments
Big green snail
New Member
- Posts
- 149
- Location
- North Somerset
Just taken down the Union Jacks, front and rear.
Gawd bless ya mam.
Gawd bless ya mam.
