defenderdog
Active Member
- Posts
- 328
- Location
- Bedfordshire
Don't panic
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
thought it was mine!
New Member
- Posts
- 8,236
mr mannering
Ryder
Having a senior moment
- Posts
- 6,616
- Location
- West Bedforshire
stripped out props, removed the roof and most of the side panels from Kai's series 3 - removed front axle. INstalled tracking system to my Chrysler, removed door posts from series... all inall a good day and very proud of Kai who worked almost entirely onhis own!
Diesel Do
Well-Known Member
- Posts
- 5,213
- Location
- Nottingham
Fitted a facelift front end and rock sliders
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
200tdi ayre
Well-Known Member
- Posts
- 5,832
- Location
- Ashbourne (sometimes)
lets see your ebay auction then 
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
still in bed but yesterday I managed to bolt me light bar on and get the seized/snapped bolt out of the droparm/panhard rod thingymawhatsit.
Had to invest in a couple of sets of punches. to do it though.
Not tried a bolt removal tool?
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Nut came off **** easy, But bolt had seized in the hole. Snapped the head off it attempting to get it to turn. It weren't the threaded section that was stuck just rust in the arm holding it.
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Fair enough... bit of a bitch ahy?
Tis common has been known to need oxy acetylene torch or ten tonne press to get em out before now.
Clanforbes
New Member
- Posts
- 1,503
- Location
- Perthshire
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
Took the drivers wing off, pulled the dent out which was hindering me opening the door.
Fitted a new aerial while it was off.
Fitted the Mercedes Sprinter style window wipers with built in washer jets - handy mod!
Cleaned the inside out after last weekends muddy session.
Replaced one of those pain in the arse hocky sticks under the indicator which I keep ripping off! REALLY need to find a way to do away with those things!
Replaced smashed indicator after the mud run at Bwlch-y-Sarnau claimed it.
Fitted a new aerial while it was off.
Fitted the Mercedes Sprinter style window wipers with built in washer jets - handy mod!
Cleaned the inside out after last weekends muddy session.
Replaced one of those pain in the arse hocky sticks under the indicator which I keep ripping off! REALLY need to find a way to do away with those things!
Replaced smashed indicator after the mud run at Bwlch-y-Sarnau claimed it.
- Posts
- 14,902
- Location
- Doncaster
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
Like the sound of that .. what parts did you use, pics??????
This is where I got mine from: Discovery 90>97 Flat Wiper Blades with Washer Jets | eBay
The washer jet block needs to be held on with stronger glue as I had to re-glue the one, but appart from that, I can't fault them.
I'll get a pic and post shortly.
Silly Tilly
New Member
- Posts
- 221
- Location
- Shepton Mallet
Changed the oil in the transfer box. WDM!
Mark L
Well-Known Member
- Posts
- 2,693
- Location
- Tamworth - Staffs
Here ya go:
And no, I didn't have any black cable ties...
And no, I didn't have any black cable ties...
blue beasty
Leaks an prone to bits dropping off
- Posts
- 63,357
- Location
- Gloucestercotshirewolds
Hurray! Looks like my oil leak is cured.....well the big one anyway
Was ever so slightly disappointed when the handbrake link snapped after connecting everything back up and rather than strip it again :frusty: I just about managed to weld the bugger back up in place.
Rear diff input seal next
Was ever so slightly disappointed when the handbrake link snapped after connecting everything back up and rather than strip it again :frusty: I just about managed to weld the bugger back up in place.
Rear diff input seal next
Similar threads
Discovery Sport
Need some advice please