What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
The Mad Hat Man said:
can i borrow him? ;)
Click to expand...


He's brilliant mate, just gets on and does it.

I put the wishbones back on me Clio after tea and fitted new discs and pads so it's ready to go now. Not a bad days work in all.:)
Polybushes in the wishbones an Pagid pads:cool:
 
Last edited:
Ive pressure washed the underside of my 2003 Disco, heated up a gallon of waxoyl and sprayed it under the back end. Will try and do the rest of it next weekend.
 
fitted my truck cab and made and fitted lower tailgate hinges.just got to clean up cappings and bed for paint.
 

Attachments

  • july 2011 054.jpg
    july 2011 054.jpg
    235.5 KB · Views: 149
  • july 2011 058.jpg
    july 2011 058.jpg
    228.4 KB · Views: 188
Recently I've installed a new swivel and seals etc on the NSF

Today I've been working on the NSR:
Fitted new upper shock mount after shearing the old one.
Fitted new spring seat and retainer
'modified' a brand new brake shoe to stop it fouling the adjuster snail and it now fits and works.
Fitted new shoes.
Fitted new drum
Refitted the shock & spring
Refitted road wheel.

About to remove the NSF brake pads which are apparently not for my year car and refit a new set which are correct.
(Incorrect with tabs / correct have holes in the back plate)

Then I'll drop it off the ramp and turn it around for the next jobs.
 
Removed most of the offside axle and driveshaft bits to get to the swivel - struggling with the bolts attaching the swivel to the driveshaft. Drowned them in penetrating oil for next time.

Removed the offside rear drum and shoes. Found a siezed piston which took a screwdriver across the slot and copious amounts of WD40 to get moving.
Found I can't undo the brakepipe attached to the piston. Oiled the union in the hope I might get it next time or it will be cut off and replaced.

So not a very productive day really :doh:
 
Changed the tyres from huge 11.50s that over-filled the arches to some nice chunky 205s.. Its much nicer to drive now aswell!
 

Attachments

  • 270647_2251106001843_1374042953_2690105_100801_n.jpg
    270647_2251106001843_1374042953_2690105_100801_n.jpg
    77.5 KB · Views: 177
  • 264688_2251107321876_1374042953_2690106_3566981_n.jpg
    264688_2251107321876_1374042953_2690106_3566981_n.jpg
    90.2 KB · Views: 197
if you hit tube between 2 hammers one used as anvil around and covering all the area of tube that has joint threaded into with some penertrating oil it will become loose enough to turn if done enough
 
Started fitting my Terrafirma +2" lift kit.
Spent three hours on it after work this evening (just come inside now), and only managed to get one corner done :eek::doh:

GT85 definitely did its job though, bolts/nuts all came out without shearing, but it was still tough going.
Was fun though, no spring compressor to hand, so used a couple of ratchet straps :D Redneck for the win :D
 
Last edited:
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
664
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
805
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
1K
Knappster
Knappster
B
Discovery Sport Need some advice please
Replies
2
Views
305
Bp112
B
F
Freelander 1 Tank lift pump: '06 TD4... maybe ok?
Replies
4
Views
252
freelounger
F
Back
Top