bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Cheers mate
Can't say ah noticed, they were saggin' without it on... feckin' ****part crap!!!!!
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Cheers mate
Can't say ah noticed, they were saggin' without it on... feckin' ****part crap!!!!!
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
defenderdavie
New Member
- Posts
- 1,981
- Location
- south east scotland
jist priced me dumb ironsNae wurries mate
sitting crying inter my port
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
jist priced me dumb irons
It could be worse mate, ye could be lookin' fur a new chassis!!
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
went out with jamese1505 and his dad kevin on a laning reci today , fooked if i did'nt get another wheel stuck in some mud and rip another cnuting valve off a tube so looking like i need to get the other 3 wheels converted to the valves on the inside of the rims (and another fookin tube FFS!!)
on the up side did have 2 spares so could carry on (well until kevin snapped off the steering joint on the pas drop arm on the disco:doh
got a couple of video's i'll post when they finally finish downloading (if ever)
so looking like i need to get the other 3 wheels converted to the valves on the inside of the rims (and another fookin tube FFS!!)on the up side did have 2 spares so could carry on (well until kevin snapped off the steering joint on the pas drop arm on the disco
:dohgot a couple of video's i'll post when they finally finish downloading (if ever
)
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
finally downloaded onto youtube :doh:
[nomedia="http://www.youtube.com/watch?v=CrfY6A_mhb0"]YouTube- 20090517183312.m2ts[/nomedia]
[nomedia="http://www.youtube.com/watch?v=CrfY6A_mhb0"]YouTube- 20090517183312.m2ts[/nomedia]
jonny ramrod
New Member
- Posts
- 55
- Location
- cheshire
planned to fit my new downpipes on the V8, but forgot to get new clamps
changed the air filter though...dont think the last owner had done it for a long while...
changed the air filter though...dont think the last owner had done it for a long while...
new2landies
New Member
- Posts
- 327
- Location
- Gloucestershire...ooooo...arrrr!!!
replaced one of two bump stops on the Disco, and the mudflap plate, that extends from the inner wing...the other one fell to bits, then had to re-work the bracket from that that goes to the bootfloor, **** poor fit, but good now
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
Was cleaning out one of my Series 3's and found this
Bloody heavy it is too......
Bloody heavy it is too......
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Sirus
Your all Banned except me
- Posts
- 22,196
- Location
- The Country of Black
For Langers and Ladybird...IT ISN'T WHITE!!
Kinnel....when you putting the propper colour on it
storm99
Spreading Joy & Harmony
- Posts
- 21,065
- Location
- Brexited. Living on an island.
Kinnel....when you putting the propper colour on it
Says the man whos Avatar is also his passport photo...
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
today ah've rubbed down the welds on the rear x member and chassis, stuck seam sealer over thum, primed it, painted it, drilled some holes for 'P' clamps to take the wirin' over to the passenger side rear, pulled me rear wirin' loom back through the chassis, waxoiled the new bits on the outside, stuck me bumperette thingies back on, fitted me NATO hitch, reconnected the wirin' loom, rubbed down the rear hanger fur the exhuaust and fitted it.
Didn't take much photies today, here's a couple fur ye's anyways...
Didn't take much photies today, here's a couple fur ye's anyways...
- Posts
- 356
- Location
- Aberystwyth Mid Wales
Started plating holes in sills/floor.
Haven't done any welding for over 20 years and it shows!.
Rear wheel arch and bottom of B pillar tomorrow.
Haven't done any welding for over 20 years and it shows!.
Rear wheel arch and bottom of B pillar tomorrow.
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
For Langers and Ladybird...IT ISN'T WHITE!!
guess you are keeping this 1 for yer self mate
cuz no cnut in thier right mind will buy that in that colour
uke:uke:uke:
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
Was cleaning out one of my Series 3's and found this
Bloody heavy it is too......
what ya doing with it mate ?
will it fit a 90? per chance?
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
