discoboy84
New Member
- Posts
- 537
- Location
- Ipswich
i'm making a bumper but yes it's getting welded up tomorrow
it's only bad as i grinded it all out
it's only bad as i grinded it all out
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
jai_landrover
Well-Known Member
- Posts
- 13,392
- Location
- Luton
Cool it seems a waste not to fix it while your there looking good.
discoboy84
New Member
- Posts
- 537
- Location
- Ipswich
yeah i know what you mean, some would just cover it up
the mounts them selves are fine which is wierd
the mounts them selves are fine which is wierd
landrovermilfer
Active Member
- Posts
- 469
- Location
- mid wales
i have fitted a new steering damper , new prop u/j's and a new donut and she drives nice now.
ratty
I'm not special I'm limited edition
- Posts
- 34,277
located a cylinder head for mine. I might even get mine on the road before MHM gets tufftee fit for action now.
located a cylinder head for mine. I might even get mine on the road before MHM gets tufftee fit for action now.
thats a forgone conclusion !
buckshot
Well-Known Member
- Posts
- 9,841
- Location
- right yer!
located a cylinder head for mine. I might even get mine on the road before MHM gets tufftee fit for action now.
well that aint puttin no pressure on you then
- Posts
- 83,276
- Location
- Embasinga stocæ
even an Octagon conclusion .
ratty
I'm not special I'm limited edition
- Posts
- 34,277
nickh75
Well-Known Member
- Posts
- 3,052
- Location
- near derby
found i got a leak from the radiator bottom hose after goin to see the wife in hospital.
took my time on the way home to make sure it didn't get worse
took my time on the way home to make sure it didn't get worse
Pikey
Dummy Ejection Facilitator..
- Posts
- 47,185
- Location
- in Baron Wet Bum's Slave pit..
Decided to find out why the fooker wobbles badly at 45/50mph. bought noo swivel pin kits. & stripped em down to discover they're both bone dry. Not a drop of oil anywhere When I moved down here I topped all the oils up inc Diffs & transfer box. But didn't do the swivels cos when I undid the filler plugs they were covered in grey greasey ****e? So I assumed they'd been filled with oneshot. Errrmmm no they hadn't. So need noo seals, bearings, gaskets the lot.
Oh and me Balls are fooked anorl :doh:
Not a drop of oil anywhere When I moved down here I topped all the oils up inc Diffs & transfer box. But didn't do the swivels cos when I undid the filler plugs they were covered in grey greasey ****e? So I assumed they'd been filled with oneshot. Errrmmm no they hadn't. So need noo seals, bearings, gaskets the lot.Oh and me Balls are fooked anorl :doh:
gemsdad
NOT BOTHERED.
- Posts
- 67,807
- Location
- halfway between here and there.
Decided to find out why the fooker wobbles badly at 45/50mph. bought noo swivel pin kits. & stripped em down to discover they're both bone dry.
Oh and me Balls are fooked anorl :doh:
if yer balls are foooked,minty will not be impressed will she.
:behindsofa::bolt:
ratty
I'm not special I'm limited edition
- Posts
- 34,277
Decided to find out why the fooker wobbles badly at 45/50mph. bought noo swivel pin kits. & stripped em down to discover they're both bone dry.
Oh and me Balls are fooked anorl :doh:
Sounds like it may be time to fit a disco axle
muckmuck
Active Member
- Posts
- 798
- Location
- chatteris cambridgeshire
just put some petrol in it and took it for a good old drive
- Posts
- 83,276
- Location
- Embasinga stocæ
replaced number plate lights. did a bit of filling over welding, primered a couple of patches and found headlight dont come on.
.
bustersbus
Well-Known Member
- Posts
- 13,755
- Location
- Near Dumfries, Scotland
Not done much tae mine apart from take it tae Arran last weekend. Got a dodgy indicator when over there so bought a new one, went to fit it last night but the feckers decided tae work again! Just gettin' some **** together for the mrs stall at the local gamefair this weekend... can't wait fur the traders disco and free beer on the Sat night
nickh75
Well-Known Member
- Posts
- 3,052
- Location
- near derby
found the leak wasn't from the bottom hose it was from the water pump AFOOKINGAIN
went to paddocks to get a new genuine pump and fitted it, seems ok now
anyone got any idea why it should fook up 3 brand new pumps within a year?
ok the last one was ****part so that might be the answer for that one
went to paddocks to get a new genuine pump and fitted it, seems ok now
anyone got any idea why it should fook up 3 brand new pumps within a year?
ok the last one was ****part so that might be the answer for that one
- Posts
- 83,276
- Location
- Embasinga stocæ
found the leak wasn't from the bottom hose it was from the water pump AFOOKINGAIN
went to paddocks to get a new genuine pump and fitted it, seems ok now
anyone got any idea why it should fook up 3 brand new pumps within a year?
ok the last one was ****part so that might be the answer for that one
Just a thought, Nick - It might be worth checking the pulleys for concentricity and alignment. I have heard of a mis-aligned pulley causing failures in alternators and water pumps. Also - if one pulley is not centrally placed on its shaft it will "pulse" different tensions along the drive belt, which can also cause premature failure.
