Hicap phill
Well-Known Member
- Posts
- 16,364
- Location
- Wiltshire
Removed the heater to find why it was always cold
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discomania
Well-Known Member
- Posts
- 6,947
Work went slack so I made the most of it
Slow build up now so I can shim the doors/bulkhead
View attachment 160239
That is a carpenters hammer! We want to see engineers hammers!
Hicap phill
Well-Known Member
- Posts
- 16,364
- Location
- Wiltshire
The other day when I drove it every time I let the clutch out there was a slapping sound. Wasn’t a knock but more a slap on the floor of the drivers side floor.
So today time to investigate, drove in the garage and opened the pit. Out with the light and off investigating I went.
15mins of looking,tapping and pulling stuff nothing jumped out at me. Loads of mud dropped on me but nothing obvious.
Got back in the 90 and pushed clutch a couple of times, it’s still there , slap slap.
Come on this can’t be hard to find can it?
Back under I go more pushing and pulling and more mud. Nothing!!!
Back in the car thinking maybe it’s my imagination that’s it’s the floor being slapped. Maybe it’s travelling from somewhere else. Nope definitely the floor. Under the bonnet look showed nothing either.
Last ditch attempt push the clutch with my hand and yes still slap slap.....
Found it
Please no laughing,the clutch pedal when pushed was catching the hard rubber mat thing in the floor and,when the pedal was release it lifted it a few cm and let go “slap”
Oh well at least that’s the first time I fixed something with no tools out the tool box.
While I was there I had a look at the small exhaust issue we have, rear silencer removed by other driver,well actually beaten into submission with a hammer till it gave up.
So a bit of googling tonight to find what I need. But I can feel a bit of mix & match coming on.
So today time to investigate, drove in the garage and opened the pit. Out with the light and off investigating I went.
15mins of looking,tapping and pulling stuff nothing jumped out at me. Loads of mud dropped on me but nothing obvious.
Got back in the 90 and pushed clutch a couple of times, it’s still there , slap slap.
Come on this can’t be hard to find can it?
Back under I go more pushing and pulling and more mud. Nothing!!!
Back in the car thinking maybe it’s my imagination that’s it’s the floor being slapped. Maybe it’s travelling from somewhere else. Nope definitely the floor. Under the bonnet look showed nothing either.
Last ditch attempt push the clutch with my hand and yes still slap slap.....
Found it
Please no laughing,the clutch pedal when pushed was catching the hard rubber mat thing in the floor and,when the pedal was release it lifted it a few cm and let go “slap”
Oh well at least that’s the first time I fixed something with no tools out the tool box.
While I was there I had a look at the small exhaust issue we have, rear silencer removed by other driver,well actually beaten into submission with a hammer till it gave up.
So a bit of googling tonight to find what I need. But I can feel a bit of mix & match coming on.
- Posts
- 9,114
- Location
- North Lincs
I had a slight accident getting the trattor into the garage as it's a bit tight, but the new snokel head turned up today
The picture are, from left to right, when I bought it, three weeks later and this evening lol
The picture are, from left to right, when I bought it, three weeks later
and this evening lol
- Posts
- 83,299
- Location
- Embasinga stocæ
those things aint cheapI had a slight accident getting the trattor into the garage as it's a bit tight, but the new snokel head turned up today
The picture are, from left to right, when I bought it, three weeks later
View attachment 160608
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
£9 on the bay , I had to buy a spare or two after greenlaning made one fall off and I crushed it...those things aint cheap
Cheers
- Posts
- 83,299
- Location
- Embasinga stocæ
ooo - linky?????£9 on the bay , I had to buy a spare or two after greenlaning made one fall off and I crushed it...
Cheers
- Posts
- 9,114
- Location
- North Lincs
neilly
Well-Known Member
- Posts
- 20,000
- Location
- Oxfordshireness
Or the larger size.
Price has increased in the last 6 months.
322519671004
Cheers
Price has increased in the last 6 months.
322519671004
Cheers
Hicap phill
Well-Known Member
- Posts
- 16,364
- Location
- Wiltshire
Door on starting to shim up.
I think it may need a blow over
I think it may need a blow over
Hicap phill
Well-Known Member
- Posts
- 16,364
- Location
- Wiltshire
Full day today as on holiday.
Dash in
Heater in
Door top on
Wired up. Have a plug I don't know where it goes....
Dash in
Heater in
Door top on
Wired up. Have a plug I don't know where it goes....
- Posts
- 9,114
- Location
- North Lincs
Looking good
- Posts
- 7,920
- Location
- East Midlands
I need to have a look at mine. I'm getting some new vibrations that feel drivetrain related. It's a bit like when one of the propshaft joints is going. Last time when I was underneath changing the handbrake shoes they felt OK (about a month ago), but I must have another feel and see if I can locate the problem.
Last edited:
- Posts
- 9,058
- Location
- Solent
New fuel pump. Impressed by the routing of the fuel pipes going up to the injectors -
just enough space to remove / replace the pump and with paths through for an extension bar and socket
to get to the fixing bolts.
just enough space to remove / replace the pump and with paths through for an extension bar and socket
to get to the fixing bolts.
8ha
Active Member
- Posts
- 228
- Location
- bridport dorset
took mine for mot passed no advisers
Hicap phill
Well-Known Member
- Posts
- 16,364
- Location
- Wiltshire
Spotted this when I removed the wing.
Looks like it's been touching the turbo.
Looks like it's been touching the turbo.
- Posts
- 14,902
- Location
- Doncaster
Fully confirmed my heater does now work .. All it took was a bit of a thumping to help seat the flap inside, which had stuck open thus not even letting the warm air through!
Mined ewe ... it now (still) has electrical issues, the indicators and the brake lights don't work!! All other lights, including Hazards, LED light, head lights dimmed and full and even reverse .. but no indicators or brake lights are a tad awkward to drive with!
Passed it's MOT yesterday, but ... the day after ...
All it took was a bit of a thumping to help seat the flap inside, which had stuck open thus not even letting the warm air through!Mined ewe ... it now (still) has electrical issues, the indicators and the brake lights don't work!! All other lights, including Hazards, LED light, head lights dimmed and full and even reverse .. but no indicators or brake lights are a tad awkward to drive with!
Passed it's MOT yesterday, but ... the day after ...
brian47
Well-Known Member
- Posts
- 8,867
Fully confirmed my heater does now work ..
Mined ewe ... it now (still) has electrical issues, the indicators and the brake lights don't work!! All other lights, including Hazards, LED light, head lights dimmed and full and even reverse .. but no indicators or brake lights are a tad awkward to drive with!
Passed it's MOT yesterday, but ... the day after ...
For a man of you experience Paul, I presume that you've checked the simple things first like blown filaments in the brake lights and the brake light switch, I don't know whether its mechanical on the brake pedal or a pressure switch on the hydraulic lines on your vehicle.
With the hazard lights working, the indicator problems are unlikely be the bulbs or the relay, so I'd be inclined to start looking at the stalk switches.
Similar threads
Discovery Sport
Need some advice please