What have you done to your Landie today.

Drookit Dug · Apr 27, 2017

I finally wired up my Defenders DRLs properly. They now light up with the ignition on and go off when sidelights are turned on. Had to do it before my new Warn winch is delivered tomorrow as the winch will reduce access to the DRL control box and wiring.
Looking forward to fitting the Warn tomorrow!

)

Drookit Dug · Apr 27, 2017

landowner said:
Got around to doing some wiring today, got dash sorted with all panel lights working.

I had my dash out and found a bunch of in-line connectors in the rear fog light wiring. It hasn't worked for a while so need to go back in there again!

Drookit Dug · Apr 27, 2017

landowner said:
Plate at top is trailer plate in a holder ready to slide out and put on trailer when l hook up , number plate and light is in usual place. Pedal lock is on as well : )

What pedal lock? I've ordered an 'ardcase' and am waiting for delivery. Not cheap but if it slows the pikeys down long enough for me to load my shotgun then I will be happy!

landowner · Apr 27, 2017

Drookit Dug said:
What pedal lock? I've ordered an 'ardcase' and am waiting for delivery. Not cheap but if it slows the pikeys down long enough for me to load my shotgun then I will be happy!

Got an x-eng

pedal lock thingy

Drookit Dug · Apr 27, 2017

landowner said:
Got an x-eng View attachment 122300 pedal lock thingy

Looks good but where do you put it when driving? The ardcase has a tidy stowage but it ain't cheap!

Drookit Dug · Apr 27, 2017

was going to post a pic of my DRLs but not sure how to post a pic cos' I'm a bit thick! Any tips folks?

landowner · Apr 27, 2017

Drookit Dug said:
Looks good but where do you put it when driving? The ardcase has a tidy stowage but it ain't cheap!

It folds down and becomes the floor

Drookit Dug · Apr 27, 2017

landowner said:
It folds down and becomes the floorView attachment 122301 View attachment 122301 View attachment 122302

That is clever!

Trailstar · Apr 28, 2017

Drookit Dug said:
was going to post a pic of my DRLs but not sure how to post a pic cos' I'm a bit thick! Any tips folks?

Just below the box where you type, there should be an upload file option....click on that.....then you will need to choose the file you want to be uploaded. ..

Brown · Apr 28, 2017

Drookit Dug said:
was going to post a pic of my DRLs but not sure how to post a pic cos' I'm a bit thick! Any tips folks?

I use this:
https://www.landyzone.co.uk/land-rover/picture-posting-for-dummies.47795/
It's a little different with the 'new' forum software but more or less still works.
I find Photobucket to be the most Landyzone compatible place to put my pictures and I use their 'IMG code' in my posts and the pictures show up as if by magic.

Turboman · Apr 28, 2017

Brown said:
I use this:
https://www.landyzone.co.uk/land-rover/picture-posting-for-dummies.47795/
It's a little different with the 'new' forum software but more or less still works.
I find Photobucket to be the most Landyzone compatible place to put my pictures and I use their 'IMG code' in my posts and the pictures show up as if by magic.

PB still works well fer me too, although some seem to have problems with it.

Drookit Dug · Apr 28, 2017

Ha ha! Trying to upload a pic of my DRLs!

Drookit Dug · Apr 28, 2017

Second attempt using imagur

Turboman · Apr 28, 2017

Drookit Dug said:
Ha ha! Trying to upload a pic of my DRLs!

Are you using a phone, or a puter? If its a puter it will work if you do as Brown suggests.

Drookit Dug · Apr 28, 2017

Starting to get p1ssed off now but looks like I've managed!

Mr S1 · Apr 28, 2017

Today I've looked at the Defender as I walked past.

That's it.

domderbyshire · Apr 28, 2017

I bled my brakes after new callipers, discs and pads had been fitted. i also sorted out the earth on the temperature guage so I stand a chance of knowing if the engine's overheating...

Tonyj66 · Apr 28, 2017

Finally finished wiring in new speakers in roof console, now I hear music instead of engine.

Drookit Dug · Apr 28, 2017

My Dixon Fabrication winch bumper finally got the winch it deserves! Needs wiring up now! It's a Warn Tabor 10k

Brown · Apr 28, 2017

This evening I have put new bump stops on the rear. Sounds simple but by the time you've got the seized bolts sawn off and found some more the right size, plus washers, it takes a while. On the old ones the rubber had separated from the metal, and had completely come off on the driver's side. I'm gradually doing little jobs like that so it's not a mad rush for the MOT which will be due at the end of next month.

What have you done to your Landie today.

Active Member

Active Member

Active Member

Pensioner Pete

Active Member

Active Member

Pensioner Pete

Active Member

Well-Known Member

Well-Known Member

Mab An Gov

Active Member

Active Member

Mab An Gov

Active Member

Well-Known Member

Active Member

Active Member

Active Member

Attachments

Well-Known Member

Similar threads