What have you done to your Landie today.

Headtester · Jan 3, 2015

Decided that I need a new front hub as the existing one is grumbling too loudly to ignore. Went from a little rumble every now and again to a "can't drive it" noise!

Albjames · Jan 3, 2015

Changed headlight bulb (fixed broken fixing drilled and tapped top two holes all for a headlight bulb
For the love of LR's

discodrivercumbria · Jan 3, 2015

Albjames said:
Changed headlight bulb (fixed broken fixing drilled and tapped top two holes all for a headlight bulb
For the love of LR's

so did i!! but mine just undid changed bulb hey presto all is ok again,
osram night breakers!! crap! havent lasted long at all,

looking into changing headlights, new for old, part no XBC000811 cannot find which light it is!!!????

danny6801 · Jan 4, 2015

Finally got all the black bits i painted onto the car nearly all done now made up for my first try at painting a car.

sp00k · Jan 4, 2015

danny6801 said:
Finally got all the black bits i painted onto the car nearly all done now made up for my first try at painting a car.

Looks smart, how did you prep and paint it?

Drummer87 · Jan 4, 2015

Fitted a new maf need to go test run it now

aaronmorris · Jan 4, 2015

danny6801 said:
Finally got all the black bits i painted onto the car nearly all done now made up for my first try at painting a car.

Looking good now Danny!
Black bits are nice and shiny

danny6801 · Jan 4, 2015

sp00k said:
Looks smart, how did you prep and paint it?

I sanded down the whole car and fixed the small bits that I could without going to far as it is a land rover

. I then primed it and sprayed it but with the bad weather of recent did have much time to paint the black bits but now is all done. Waiting for a few bits like new mirrors so not long till I'm back out in it.

danny6801 · Jan 4, 2015

aaronmorris said:
Looking good now Danny!
Black bits are nice and shiny

Cheers mate have been having the same problems as you have with that recent bad weather we had but glad it's all done now.

Animal88 · Jan 4, 2015

got under it to belt the handbrake drum with a copper hammer. think yesterdays puddle splashing had got some water in it that had froze solid during the night had to go to low range to get it to move the first time then it did it again so used a copper hammer to persuade it to release properly. glad I'm picking up the new handbrake shoes and fitting kit tomorrow. think its needed before i have further problems

taylorslandy72 · Jan 4, 2015

Preparing the chassis for welding "once again"

Westwood8055 · Jan 5, 2015

Dropped it off for its mot knowing it's going to fail

crapping myself waiting for the call to state cost of repairs and the inevitable fail word

Klm2 · Jan 5, 2015

Just changed the water temp sender and the injector Harness. And the award for bright idea of the decade goes to the NUMPTY who designs an engine with a wiring harness running under the rocker cover...
Doh...........

bankz5152 · Jan 6, 2015

Fitted MUD LED lights all around. Very pretty and very bright! Much clearer, sharper and just nicer than the regular lights.

Sadly upon fitting realised my brake switch has broken...

Animal88 · Jan 6, 2015

need to get the new handbrake shoes and fitting kit fitted the constant bang as I try to drive away is getting annoying. need to adjust the headlight aim aswell hope that will improve my visability I think they are too high so I'm not getting the beam pattern on the road so I can't see. is there anything else that people have found helps with the headlights? D1 300tdi lights on a 200tdi

markSX · Jan 6, 2015

Animal88 said:
need to get the new handbrake shoes and fitting kit fitted the constant bang as I try to drive away is getting annoying. need to adjust the headlight aim aswell hope that will improve my visability I think they are too high so I'm not getting the beam pattern on the road so I can't see. is there anything else that people have found helps with the headlights? D1 300tdi lights on a 200tdi

Check the voltage your getting to the bulb as old oxidized connectors in the system reduce the voltage that gets to the bulbs.

Check battery voltage and if you have much of a drop at the bulbs it's time to run the lights off a relay.

This should tell you more about it

Daniel Stern Lighting Consultancy and Supply

The Mad Hat Man · Jan 6, 2015

Animal88 said:
need to get the new handbrake shoes and fitting kit fitted the constant bang as I try to drive away is getting annoying. need to adjust the headlight aim aswell hope that will improve my visability I think they are too high so I'm not getting the beam pattern on the road so I can't see. is there anything else that people have found helps with the headlights? D1 300tdi lights on a 200tdi

do the relay mod in the qfac section

bigvinnie · Jan 7, 2015

Took it for MOT and it only failed for r/h outrigger. Requires patching. First welding its had. So in tomorrow for a patch and its retest.

Quite happy really was expecting a few other things the garage clearly missed!

Animal88 · Jan 7, 2015

markSX said:
Check the voltage your getting to the bulb as old oxidized connectors in the system reduce the voltage that gets to the bulbs.

Check battery voltage and if you have much of a drop at the bulbs it's time to run the lights off a relay.

This should tell you more about it

Daniel Stern Lighting Consultancy and Supply

The Mad Hat Man said:
do the relay mod in the qfac section

cheers for how to check I'm planning on doing the relay mod anyway it's just getting the time to do so.
any idea why my high beam tell tale is dimly lit with the dip beam on?

Drummer87 · Jan 8, 2015

Fitted the egr blank, Camshaft seal and cleaned up oil leak from there and Rear wiper blade. Next change oil pump bolt and fit rear discs and pads.

What have you done to your Landie today.

Active Member

Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Active Member

Head's a shed

Well-Known Member

Well-Known Member

Active Member

Active Member

Active Member

New Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Active Member

Active Member

Similar threads