What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Took it for a spin. Ordered a new clock, insured and taxed it. Discovered some space underneath where the prop/vcu should be. But not necessarily in that order.
 
Fitted the replacement injection pump and shes running again.

Fired up first time once primed :)

Now I need to tweak it and get some power back.
 
refitted ns frnt hub.
replaced ns headlight
replaced headlight bulbs.
adjusted ns rear wheel bearing.
found bellhousing bolts missing (3 out of 4)
pressure washed under side.
found more bodges on replacement gearbox fixing.
 
finally found the issue with my transfer box selection. the grub screw had come loose. so locktighted it in and now have a like new transfer selection. then fabricated some bullbars with light protectors onto my winch bumper. still needs some tidying up but they will do the job. also managed to replace to my rear diff seal as it was leaking quite badly
 
Took back cover off the transfer box to try and find the source of the clunk. By the looks of things its going to be a gearbox and transfer box out job. Need to source a decent second hand set of boxes.
 
jamesmartin said:
which vehicle ,if defender boxes dont scrap them
Click to expand...

Defender, 1992. Plan to find a second hand set, give them the once over and sort any problems then take a few days off work and take current ones out and fit new ones.

Splines on that main shaft are all worn and there appears to be quite abit of play between that cog that you can remove after you've removed the pto cover and the other gears, as well as the wear on the splines.
 
Big Mat said:
Defender, 1992. Plan to find a second hand set, give them the once over and sort any problems then take a few days off work and take current ones out and fit new ones.

Splines on that main shaft are all worn and there appears to be quite abit of play between that cog that you can remove after you've removed the pto cover and the other gears, as well as the wear on the splines.
Click to expand...


I'm in the same boat!
Going to keep an eye out for a decent 2nd hand tbox and gbox.
 
Big Mat said:
Defender, 1992. Plan to find a second hand set, give them the once over and sort any problems then take a few days off work and take current ones out and fit new ones.

Splines on that main shaft are all worn and there appears to be quite abit of play between that cog that you can remove after you've removed the pto cover and the other gears, as well as the wear on the splines.
Click to expand...
still dont scrap old boxes some one can rebuild them at some other time defender boxes arent that common
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
626
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
905
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
548
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
983
invisible999
I
Back
Top