What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
noo mount tuned up yesterday was hoping to fit it tonight but my mate needed his alternator fitting to his c2 :frusty: damn thing. sorted that then found its tried lowering itself by snapping the osf spring so looks like I'll be sorting that out tomorrow if he can source the parts. then sorting my mount out after
 
Last edited:
timc1967 said:
V8 carb 110 - keeping it simple, indicators packed up. Tried hazard, worked once. Suspect fuses but caused by rain ingress. Parked it up as I don't have time.

Can anyone with rear wiper tell me where the switch normally is... can't find it on either of my 110s.
Click to expand...
Hi I had similar fault with my 1987 90v8, the indicators packed
Up after a heavy downpour,found the fault was the indicator
Relay was full of water, it was situated behind the fuse box
Inside the cab on the gearboxtunnel/bulkhead.
I opened up the relay dried it out,remitted it and it worked
Long enough for the new relay to turn up.
 
would like to give bertha a wash and brush up,but nature is doing it for me,nothing needs doing,so feet up(for once)and a cup of char!!
 
This morning we set about sorting the vacuum pump on the Disco 300tdi, which has been leaking oil since the day I bought it. After some reading on here, we decided to take the pump off, drill out the rivets, clean it up and bolt it back together with a nice new gasket. What was odd was that after we drilled out the rivets on the top cover and opened it up, what we found inside were numerous bits of round(ish) metal (see pic) whatever had been in there had been there a long, long time, the casing and cover were lightly pitted and the bottom rubber gasket was worn away in places, the bits of metal had been rounded off smooth... We cleaned it up, put it back together and it all works fine and no more leaks, curious as to what we found inside tho, any ideas?

20141025_123803_zps6bdfd217.jpg
 
Last edited:
Yesterday, changed oil, & filters made a clamp for the roofrack. So it's held on with 2 clamps now :eek:. Moved the light bar back 4" as it was in the way of the front legs of the new rack. Must say it looks better with the lights only protruding about 1" in front of the rack. So they should be better protected when out laning.

On Friday I Acquired a almost new 5Tonne 3m Round sling. :D courtesy of National Grid...:rolleyes:
 
I've been practising bodywork skills, I've rubbed down, filled, rubbed down again and primed my bonnet after it lost an argument with what looked like a weak overhanging branch.
Have realised I should either have filled and rubbed down more or left it to a professional!!!!
 
Phoned my insurance to get a new rear window thanks to ma 2 daft dugs. Well impressed !
 

Attachments

  • 20141026_082247.jpg
    20141026_082247.jpg
    184.1 KB · Views: 178
  • 20141026_082241.jpg
    20141026_082241.jpg
    118.6 KB · Views: 169
  • 20141026_082236.jpg
    20141026_082236.jpg
    137.5 KB · Views: 198
With the help of chr1s my landy now has a dog guard, bench seats and a fancy new cubby :)
 
Done some more painting today managed to finish the roof and do a little more body work.
 

Attachments

  • 20141026_105520.jpg
    20141026_105520.jpg
    313.4 KB · Views: 170
bigvinnie said:
they where all hyper at the possibility of getting of their leads like they do every day, jumping about and smash!..either one of the leads has flicked it or one of them's headbutted the brake light and shattered the window.

either way new window on route and inner window guard getting ordered tomorrow
Click to expand...

Are right thought maybe someone had tried to get in your landy or something and the dogs had somehow smashed the window trying to get at them ;)
 
Last edited:
cornish rattler said:
Are right thought maybe someone had tried to get in your landy or something and the dogs had somehow smashed the window to get at them ;)
Click to expand...

thats what I was thinking. Nice pair of GSD's there mate.

I have lost my cabletied gearbox mount and new one in place now lets see what it's like on the drive to work :D
 
Thought about it.... sighed a lot... and wondered if there is an easy way to clean off the underseal, grime, crap and waxoyl from the chassis before I send it off for welding?
:(
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
628
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
907
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
551
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
988
invisible999
I
Back
Top