cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
Drove it back from billing had a great weekend camping on the field next to billing aquadrome, will post pic's later 
What have you done to your Landie today.
- Thread starter madfrank
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
Good weekend at billing! brought a couple bits for it!
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
Nice one next year i want to take my 90 round the offroad course
Dito, my landy didn't make it this year, next year I hope to own the twist off
discomark10
Well-Known Member
- Posts
- 3,977
- Location
- Milton Keynes
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
Dito, my landy didn't make it this year, next year I hope to own the twist off
Nice
- Posts
- 83,282
- Location
- Embasinga stocæ
Drained excess oil from front diff & gearbox. Topped up rear diff ( leaking from front oil seal). Cleaned up a couple of areas of corrosion and sprayed with acid etch.
Removed gbox wading plug.
Removed gbox wading plug
.
aaronmorris
Head's a shed
- Posts
- 6,369
- Location
- Doncaster
Nice pics bud, But all these pics makes me wish I went
But no cash and vehicles still in bits
Ah well, Maybe next year
sp00k
Well-Known Member
- Posts
- 1,530
- Location
- Washington, County Durham, UK
Washed the mud off the chassis, then used the beast to pull out the massively over engineered washing line concrete footings. It had resisted all my manual attempts to remove it. Landy pulled it out without me even noticing it
easye1
Banned
- Posts
- 8,557
bit the bullit and took out all the parts of my rear sun roof.
for 2 or more years its had a cut to size piece of perspex in - yes it still leaked.
been running for months with a piece of heavy duty plastic held by gaffa tape..
took it all out, cleaned everything down to shiney new paint,
will use the fittings to mark out a piece of galvo sheet (my stainless was just not big enough) but cut it well plus on size, silicone it in place and use blind ended pop rivets to secure....when all dry, then paint the outer side gloss black, the inside underseal then cover with a cut piece of carpet or sound proofing - whatever I can find...
Its no loss as a sunroof, never used it, and theres just too much glass in the back anyway......
for 2 or more years its had a cut to size piece of perspex in - yes it still leaked.
been running for months with a piece of heavy duty plastic held by gaffa tape..
took it all out, cleaned everything down to shiney new paint,
will use the fittings to mark out a piece of galvo sheet (my stainless was just not big enough) but cut it well plus on size, silicone it in place and use blind ended pop rivets to secure....when all dry, then paint the outer side gloss black, the inside underseal then cover with a cut piece of carpet or sound proofing - whatever I can find...
Its no loss as a sunroof, never used it, and theres just too much glass in the back anyway......
Garybaker
New Member
- Posts
- 107
- Location
- Between Lancaster and Kendal
Looked through all my brochures from Billing mentally spent a fortune...in reality nowt lol
mentally spent a fortune...in reality nowt lol
rough fitted my rock/tree sliders and hammerited them just need to sort out some steel to make them more of a wrap around sill so they are part of the truck instead of just a bolt on part. also helped my mate fit his winch then tested it pulling my truck on the flat. now I'm jealous and need to sort out making the rest of the winch bumper I now have fitting it and getting my own winch sorted
cornish rattler
Well-Known Member
- Posts
- 6,432
- Location
- Manc chester
Went to fit my prop shaft grease nipples I bought from the billing show the other day only to find they was the same ones that was already fitted
need to buy some extra long ones
need to buy some extra long ones
- Posts
- 955
- Location
- Shetland
Started by trying to develop a new form of front locomotion.. ; )
But gave up on that and carried on with the brake renewal work. Got as far as taking everyting off on the passenger side then decided to do the swivel seals as well so stripped right down to the swivel ball. Found that it was heavily scored and pitted so have ordered a new pair which I can't get until tomorrow afternoon so work stop right now.
But gave up on that and carried on with the brake renewal work. Got as far as taking everyting off on the passenger side then decided to do the swivel seals as well so stripped right down to the swivel ball. Found that it was heavily scored and pitted so have ordered a new pair which I can't get until tomorrow afternoon so work stop right now.
