What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
nickh75 said:
just had another piggy back coz the clutch slave cylinder is fooked,
managed about 3 miles changing with no clutch then had to stop at a junction an that was the end of that!

tow truck home for me AGAIN:eek:

bastid land rovers:banghead:


so i'm gonna get pi#sed an think how i'm gonna fix it
or should i do a gaylander special a chuck a gallon af petrol in it?
Click to expand...

well if that happened 2 ya gaylander i wud use it 4 target practice
 
Hung the bulkhead upside down and filled it with primer. Ah used an empty cider bottle to pour the primer in through one of the wing fixin' holes and then sloshed it about inside the bulkhead. Ah thought ah had taped all the holes up but missed a couple as there was primer every soddin' where!!! Then ah flipped it back over and let what was left drain out and left it tae dry....
Primedinside001.jpg


Primedinside002.jpg


Primedinside003.jpg


Primedinside004.jpg


Primedinside005.jpg


Once that's dried out ah'm gonna do the same with some paint;):D
 
Last edited:
nickh75 said:
just had another piggy back coz the clutch slave cylinder is fooked,
managed about 3 miles changing with no clutch then had to stop at a junction an that was the end of that!
Click to expand...

Next time, engine off, into 1st`then just twist the key. As long as it's warmed up, and not a poor starter usually, it should fire up.
 
thought "is it warm enuf to waxoil".
pause!
thort "fcuk tha"
went back inside

rite out 100 times "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused"
 
The Mad Hat Man said:
thought "is it warm enuf to waxoil".
pause!
thort "fcuk tha"
went back inside

rite out 100 times "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused" "must get enthused"
Click to expand...

GET YER ARSE OUTSIDE AND DO SOME WORK!!!!!

If tufftee aint ready to roll be easter we'll leave you behind.:mad::mad::mad:

YOU HAVE YOUR DEADLINE NOW GET YER LAZY GOOD FER NOTHING ARSE OUTSIDE BIATCH!!!!

DID THAT HELP ^^^^^?:D
 
looked out window see disco in car park then thought **** it im going to work on the bike its so nice and sunny its rude not to :D
 
ratty said:
GET YER ARSE OUTSIDE AND DO SOME WORK!!!!!

If tufftee aint ready to roll be easter we'll leave you behind.:mad::mad::mad:

YOU HAVE YOUR DEADLINE NOW GET YER LAZY GOOD FER NOTHING ARSE OUTSIDE BIATCH!!!!

DID THAT HELP ^^^^^?:D
Click to expand...


nope :(

can i stick the underbody schutz and/or waxoil in a kettle to warm it up? Opened of course - or is that too hot?
 
Changed the battery.

Cut the packing straps off the new battery with pliers, then tossed them back in the toolbox. What a shot! pierced the large, almost full, can of WD40 with a hole just big enough for the contents to pss out everywhere. With brain still failing to engage, and WD40 still in full flow, I picked it up with the plan of putting it somewhere out of the way while it drained. Brain then engaged just enough to politely point out that I was effectively holding a bomb, but didn't engage enough to tell me what to do. Dropped it, ran away.

Still, tools are nicely lube up now....
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
536
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
631
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
913
Knappster
Knappster
Mooky
Replacing thermostat
Replies
14
Views
560
Mooky
Mooky
I
Re-coding of ABS Module after repacement
Replies
10
Views
989
invisible999
I
Back
Top