What have you done to your Landie today.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
If there is any hint of them going then replace them as they are not expensive compared with the hassle of removing the box to replace them later if they go but if they are ok there isn't much point.
 
cowasaki said:
If there is any hint of them going then replace them as they are not expensive compared with the hassle of removing the box to replace them later if they go but if they are ok there isn't much point.
Click to expand...

Ok, may just order them as well then, its been juddering when i pull away in first, which is apparently a sign or either a work plate or oil on the clutch.
 
Mine does that very slightly but worse in low range. I have a new borg and beck clutch with heavy duty fork etc but i was delaying changing it till i decide on whether or not to fit a disco r380 to replace my r380 the disco one might be better for economy and i can swap all the selector stuff from the defender one.
 
cowasaki said:
Mine does that very slightly but worse in low range. I have a new borg and beck clutch with heavy duty fork etc but i was delaying changing it till i decide on whether or not to fit a disco r380 to replace my r380 the disco one might be better for economy and i can swap all the selector stuff from the defender one.
Click to expand...

Either way, its a gearbox out job and i dont have the means to do that. so its gonna have to go to a garage. and bankrupt me in the process ha!
 
cowasaki said:
It's not too difficult on a landy. Maybe someone can give you a hand for some beer tokens. Plenty of expertise on here.
Click to expand...

No? everyone garage ive spoken to have told me its a gearbox out and a a days work. That would be grand but im not 100% what is wrong so cant guarantee I've got all the parts. And im down in kent, most pps seem to be north of me :confused:
 
a2dds said:
No? everyone garage ive spoken to have told me its a gearbox out and a a days work. That would be grand but im not 100% what is wrong so cant guarantee I've got all the parts. And im down in kent, most pps seem to be north of me :confused:
Click to expand...

F*&K....

It's NOT that much work!! It's too far for me but I'm sure someone nearer would be able to help you out for an afternoon for a quarter of that or less. You could get a recon gearbox, new clutch and fitting for that round here.
 
cowasaki said:
F*&K....

It's NOT that much work!! It's too far for me but I'm sure someone nearer would be able to help you out for an afternoon for a quarter of that or less. You could get a recon gearbox, new clutch and fitting for that round here.
Click to expand...

No No sorry not a grand haha, thats grand as in thats great ;) they quoted 479 for labour and parts. Got a mechanic next door to me who agreed to have a jolly up in my unit over a weekend for a hundred or so.

Hopefully can get it done. Ordered new clutch and arm, with a metal bit welded on the back of the arm to make it stronger :)
 
done the dreaded fuel pipe leak on top of the fuel tank used an air compression connector as suggested on landy zone only thing was my pipes turned out to be 8mm not 10mm
 
I've replaced the front hub bearings and the swivel oil gasket. Still got the other side to do 😞
Lots of muddy water in there, I guess driving though water and leaky gaskets font mix lol
 
You must log in or register to reply here.

Similar threads

B
defender 2.4 puma reverse light switch
Replies
4
Views
525
BEASTIE 90
B
Padda.116
300tdi disco 1, new head gasket oil leak!!
Replies
10
Views
604
Padda.116
Padda.116
Knappster
Shot-blasting steel wheels
Replies
9
Views
883
Knappster
Knappster
Mooky
Replacing thermostat
Replies
8
Views
364
Forrest Gump
F
I
Re-coding of ABS Module after repacement
Replies
10
Views
958
invisible999
I
Back
Top