What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
andyfreelandy said:
The trailer indicator lamp is only fed from the flasher unit, or should be! Do you have a tow bar and a 4 pin flasher unit?

If not then there is defo a false feed coming from somewhere. Do you mean relays in dash or engine bay??

Will have a 'feel' of my relays. Ooh er......

Ps. Happy Birthday KV's Dad 🥳
Click to expand...
I have a towbar with normal trailer wiring plus the caravan plug, and the extra pin flasher unit which does the dash light.

oh, and Dad will be pleased to have an LZ birthday greeting. Thanks Andy.
 

Attachments

  • IMG_5363.png
    IMG_5363.png
    4 MB · Views: 8
  • IMG_5362.png
    IMG_5362.png
    3.6 MB · Views: 8
  • IMG_5361.png
    IMG_5361.png
    3 MB · Views: 10
Craiger said:
Hi Rank Amatuer,

had a similar issues last week that i am still trying resolve on my FL2. Engine just cranks I was not so lucky with the crank sensor change. Engine cranking healthy but want fire up. I then went on to change the fuel filter and bleed the pipes a number of times thinking it may be clogged. Still want fire up.

any advice appreciated


Craiger
Click to expand...

Sorry @Craiger can’t help much. I got a new crankshaft position sensor but haven’t got round to fitting it (sailing got in the way). My fault has not recurred since my first post in the subject.
It is possible all the computers got their canbus knickers in a twist as I’m in the habit of inserting the fob and pressing the engine start button more or less simultaneously.
You could try a hard reset of the computers by disconnecting the battery and, give it a few minutes, short the +ve terminal cable to ground. NOT THE BATTERY! I think this is similar to a full-on reboot of all the on-board computers.
 
kernowsvenski said:
I'm glad you've posted these pics. I nearly chastised you for not putting them on your original post about the rails!
Click to expand...
I know, I know!
I forgot to take them when I did the rails the other day, then I thought I’d wait for the bars to arrive 😁

Now realising how high the roof box will be, and pondering how to actually load/unload the thing when it’s on there!!!
 
andyfreelandy said:
You'll need the rear door ladder. Oh dear, F2 has no wheel bracket.

Time to design a ladder mount for an F2 ??
Click to expand...
Something to ponder over winter perhaps… probably need to be something collapsible/extending that can stand-off from the roof rail and run down to the floor (to take most of the weight).

I’ll get the box from the shed and put it on over the weekend (and then measure the height and write it down on a sticker inside the car 😉)
In the meantime, I’m looking at collapsible step-type things that I can put in the back when we go, but don’t take up lots of room. Only need to use it a couple of times.
 
andyfreelandy said:
You can also get telecopic free standing step ladders. Not as cool I grant you, but you would be able to move them around the vehicle.
Click to expand...
A little more ‘practical’ I guess!
I’m just looking for something small that I can put in the back to take along, without taking up too much cabin space. Also seen some fold-up step/stool things in Jeff’s emporium. Seem to be plastic, but will be much flatter when folded. Will need to check what height I can get away with, and at what point my brain excludes them due to the likelihood of me falling off/breaking the thing!
 
Rank Amatuer said:
Sorry @Craiger can’t help much. I got a new crankshaft position sensor but haven’t got round to fitting it (sailing got in the way). My fault has not recurred since my first post in the subject.
It is possible all the computers got their canbus knickers in a twist as I’m in the habit of inserting the fob and pressing the engine start button more or less simultaneously.
You could try a hard reset of the computers by disconnecting the battery and, give it a few minutes, short the +ve terminal cable to ground. NOT THE BATTERY! I think this is similar to a full-on reboot of all the on-board computers.
Click to expand...
Hi

I discount battery, unattached all harnesses in passanger side footwell. Pulled out main relay in engine bay fuse box. Waited 30 minutes.....reattached. Place key in ignition only pressing start! Left key in for 20 minutes( battery on trickle charge) just under an hour if waiting.....finger crossed went for the start......YES ! The sound of the old diesel bus returned. I can only put it down to surges within the circuit and ECU.....but this worked
 
You must log in or register to reply here.

Similar threads

C
Freelander 2 diff
Replies
8
Views
473
Mark Piercy
Mark Piercy
N
Freelander 1 I have a freelander currently on a Caribbean island with a bad rear diff . can i delete the rwd --looking to convert my freelander to 2wd front wheel
Replies
6
Views
1K
Philgt50
Philgt50
J
Freelander 2 (LR2) Freelander 2 Judder when first set off - Stops after about half a mile.
Replies
0
Views
305
jjardine357
J
htr
Freelander 1 Poor Radio reception...
Replies
7
Views
1K
Dippypud
Dippypud
M
Freelander 2 (LR2) freelander 2 diff swap
Replies
6
Views
978
lyron
lyron
Back
Top