Do the PTU, rear diff oils too, and the Haldex fluid, filter and motor screen, as all those are also 150k intervals, which often causes them to fail before the service is due.
What have you done to your Freelander today
- Thread starter Freelaner
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Do the PTU, rear diff oils too, and the Haldex fluid, filter and motor screen, as all those are also 150k intervals, which often causes them to fail before the service is due.
NeilTD4
Active Member
- Posts
- 385
- Location
- Warwickshire
The Haldex and rear diff are next on the hit list, I have all the relevant fluids and parts in stock ready and waiting...
PTU has recently been replaced, so I know that is ok for the time being...
I'd not trust someone else to get that right.
I believe my rear diff was a replacement, which seized because there was no oil in it.
NeilTD4
Active Member
- Posts
- 385
- Location
- Warwickshire
I'd not trust someone else to get that right.
I believe my rear diff was a replacement, which seized because there was no oil in it.
It's been done (twice!!) since it's been in my ownership. Luckily it's all been covered by warranty
Think the NSF wheel bearing will be the next thing I call upon said warranty for...
Denboy
Active Member
- Posts
- 124
- Location
- Merseyside
Done the auto box fluid today didn't have a 17mm hex plug for the drain found a 10mm bolt has a 17mm head welded a nut on the bolt cheap fix
- Posts
- 380
- Location
- Cheshire
Kevm
Active Member
- Posts
- 181
- Location
- Gainsborough
No, me.Your Freelander has Covid....
Unfortunately I was working with someone last week who tested positive, now I've got it too.
Alibro
Well-Known Member
- Posts
- 7,181
- Location
- Northern Ireland
Bummer mate but unfortunately we're all going to get it sooner or later.No, me.
Unfortunately I was working with someone last week who tested positive, now I've got it too.
Get well soon.
Thanks Ali.Bummer mate but unfortunately we're all going to get it sooner or later.
Get well soon.
It was inevitable I'd get it, especially working where I do. I'm surprised I'm so ill with it though, especially as I've had 3 jabs.
GrumpyGel
Well-Known Member
- Posts
- 26,386
- Location
- Christchurch, New Zealand
Are you sure its Covid and not the more serious Man Flu?
Definitely Covid, had the tests, come back positive for Covid.Are you sure its Covid and not the more serious Man Flu?
andyfreelandy
Well-Known Member
- Posts
- 5,563
- Location
- Devon
Sorry to hear you're feeling bad with it. Take it easy and get well soon.
K series head gasket here needs doing if it would make you feel better!!
K series head gasket here needs doing if it would make you feel better!!
Joined Nodge in the Covid isolation ward, thankfully it's more of a cold and an excuse to stay home.
In the meantime finally figured out the knocking noise that's been bugging me for like a year. Started to get difficulties changing gear as well recently, which was similar to when I replaced the lower engine tie rod.
Obviously it can't be that though since I replace that pretty recently. Then I realised recently meant about 4 years and 15,000 miles, and it was a cheap Ebay part.
This time I thought I would try and polybush it, I know it will cause more vibrations to come through the cabin. But if I'm running Insa Turbo Dakars tyres half the year I won't notice anyway!
I think I made the same mistake again though and bought cheap Ebay polybushes. Will have to cut down the small bush spacer tomorrow as it's 3mm too wide.
In the meantime finally figured out the knocking noise that's been bugging me for like a year. Started to get difficulties changing gear as well recently, which was similar to when I replaced the lower engine tie rod.
Obviously it can't be that though since I replace that pretty recently. Then I realised recently meant about 4 years and 15,000 miles, and it was a cheap Ebay part.
This time I thought I would try and polybush it, I know it will cause more vibrations to come through the cabin. But if I'm running Insa Turbo Dakars tyres half the year I won't notice anyway!
I think I made the same mistake again though and bought cheap Ebay polybushes. Will have to cut down the small bush spacer tomorrow as it's 3mm too wide.
Rank Amatuer
Well-Known Member
- Posts
- 4,880
- Location
- Scotland
Got my FL2 back from the body shop yesterday. New front offside wing. Can’t tell if the driver’s door has been re-skinned or filled & faired, but it look good. Rear offside door scratch invisible. New windscreen. Washed, polished and valeted inside. Looks gooooood!
Might try for the passenger side next year.
Comments from the lads that did the work. “You’ve looked after this car mate. It drives great for something with over 200k on the clock.”
Might try for the passenger side next year.
Comments from the lads that did the work. “You’ve looked after this car mate. It drives great for something with over 200k on the clock.”
Last edited:
kernowsvenski
Well-Known Member
- Posts
- 1,616
- Location
- Truro
Popped in to the local scrappy this afternoon and managed to get a pair of rear door window rubbers to replace my horrible corroded ones. £5 for the pair! The sun is out so I may go and fit them shortly. Must remember not to kink them when installing the glass!
Rank Amatuer
Well-Known Member
- Posts
- 4,880
- Location
- Scotland
Folded the rear sears down and loaded my FL2 with probably the heaviest load it’s ever carried (concrete slabs & bags of cement). Handled fine when I drove off.
Forgot about it until I came to apply the brakes and nearly undid all the good work the body shop did last week.
One of those “Ohhhh shiiiiiiiiiit’ moments.
Silly me.
Back & knees hurting this morning too.
Forgot about it until I came to apply the brakes and nearly undid all the good work the body shop did last week.
One of those “Ohhhh shiiiiiiiiiit’ moments.
Silly me.
Back & knees hurting this morning too.
Are the brakes ok? Mine makes no difference to stopping, regardless of how much weight is in it, although I've only had 5 people + luggage in him.
However I was stunned at the improvement in brake performance, after I replaced all the rotors, pads and front calipers/hoses.
Similar threads
