What have you done to your Freelander today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
'd like something like that myself but I doubt the wife would allow me to divert funds for such "frivolities"
Click to expand...
get one section at a time .. spread it over months .. sneak it into safe hiding place ..
gather tools 'n materials .. take solo jaunt into the wilds
install induction system .. test drive ..
go home ..

i'll let know if it were worth it .. after a test drive .. or two .. :)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
hd3 said:
get one section at a time .. spread it over months .. sneak it into safe hiding place ..
gather tools 'n materials .. take solo jaunt into the wilds
install induction system .. test drive ..
go home ..

i'll let know if it were worth it .. after a test drive .. or two .. :)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Click to expand...
Sounds like you speak from experience ;)
Love to hear how it performs.
 
I finally got round to fitting some budget silicone boost hoses I picked up recently. The fit was ok except for the 90° elbow hose to the EGR valve. I needed to trim about 20mm off one end and 10mm off the other to get a good fit (offcuts on intake trunking). Otherwise they went on easy enough. I didn't use the hose clips that came with the hoses though as the original Norma clips are stainless and better quality.
20160625_140604.jpg
 
Nodge68 said:
I finally got round to fitting some budget silicone boost hoses I picked up recently. The fit was ok except for the 90° elbow hose to the EGR valve. I needed to trim about 20mm off one end and 10mm off the other to get a good fit (offcuts on intake trunking). Otherwise they went on easy enough. I didn't use the hose clips that came with the hoses though as the original Norma clips are stainless and better quality.
View attachment 102760
Click to expand...
Are they the 47quid ones off ebay?
Mike
 
Skinny Mike said:
Are they the 47quid ones off ebay?
Mike
Click to expand...
Thay came off Ebay Mike ;)
There are several Ebay sellers, selling what appears to be the same hose sets at various prices. The set I bought cost just £41.91 which I thought was reasonable enough. I actually bought 2 sets, the other was fitted to a neighbour's car last Monday evening.
 
Nodge68 said:
Thay came off Ebay Mike ;)
There are several Ebay sellers, selling what appears to be the same hose sets at various prices. The set I bought cost just £41.91 which I thought was reasonable enough. I actually bought 2 sets, the other was fitted to a neighbour's car last Monday evening.
Click to expand...
Thought they looked like em. I've held off buying them, a bit suspicious of the quality.
You'll have to let us know if they're ok, or if they split within the week :confused:
Mike
 
Skinny Mike said:
Thought they looked like em. I've held off buying them, a bit suspicious of the quality.
You'll have to let us know if they're ok, or if they split within the week :confused:
Mike
Click to expand...
Quality looks OK actually. The material is thick and has reinforcement cords. I've no doubt that there'll outlast the car!!
 
Nodge68 said:
Quality looks OK actually. The material is thick and has reinforcement cords. I've no doubt that there'll outlast the car!!
Click to expand...
I bought the same hoses and had to cut the same elbow. I thought it was because my car is pre facelift so a bit different but it must be a quality issue. I also had to find a bit of pipe to use where the sensor is at the front of the car cause the listing didn't make it clear it is for post facelift. The strength and material quality seem fine though.
 
re: the air-intake mod ..

@ Nodge68 re. ..
Love to hear how it performs.
Click to expand...

i would definitely recommend it !! ..

engine much more responsive to the accelerator ..
quicker and stronger acceleration ..
am positive fuel mpg has improved ..
( shall let know by how much after a few fill-ups )
a.i.t sensor showing possible better air-cooling
( will know for sure next time we have hot-for-the-uk type ambient temps.
( as that's when i've paid most attention to the readings

the initial test .. to see IF engine performance had improved ..
was to use a Lower ' torque ' setting on the ron-box
and see what the engine response was to accelerator movement
was nicely suprised by the improvement :)

( so .. in theory .. might be a worth-while mod. to do
( on a stock hippo td4 ..
( and definitely a 'to-do' before a live ecu remap session ..

the mod effects performance thru-out the rpm range
but can be Really felt at the low and mid rpm ranges

stands to reason that the sooner and quicker the air flows across the maf sensor
the quicker the ecu will allow larger quantities of fuel to be injected ..

( i aim report observations in more detail at some-stage )

~~~

'n only 1 clip to undo to get to the air-filter housing :)

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
Not today but yesterday mot third one i;ve put it through and its passed all three in my time of ownership ,mechanically all ive done is service and one track rod end , battery in three years . Trev
 
Nodge68 said:
I hate those annoying rattles, squeaks and knocks that cars develop as they age. A bit like those ailments that people suffer with age too.
Click to expand...

Pardon me Nodge, (Apologies in advance. I've edited your reply back a little).
On a personal basis I've recently noticed my bodily functions becoming a little more audible. In particular a gurgling sound when passing water first thing in the morning, my knees making a 'creaking' type sound when I stand up and, I hesitate to mention this, but, an occasional 'squeaking' type sound after spicey food. Please advise.
P.S. hd3's engine looks neat.
 
Last edited:
Alibro said:
Not really a problem here. :(
Click to expand...
Not really needed for cooling but it's good at keeping the windows from fogging up. I have my heater blowing at the windscreen and floor, pretty much all the time. This means that my AC runs pretty much constantly.
 
It's nice to have the A/C no matter where it's aimed!
Today I did a scan on mine so that Blackbox can send me the activation codes for my diagnostic computer.
My first job will be programming a spare fob. Pity it can't clone the transponder keys, I'll have to go to a locksmith for that.

That's a mean looking Hippo Diesel Do!
 
You must log in or register to reply here.

Similar threads

T
Help!
Replies
13
Views
599
Nodge68
Nodge68
B
Freelander TD4 Mk1 Rear Diff - Does anyone have any advice on how to replace the rear diff?
Replies
1
Views
198
Freddie17
Freddie17
R
LED side lights not working
Replies
9
Views
646
RickyFreelander
R
C
Rear wheel bearings or diff
Replies
11
Views
1K
Nodge68
Nodge68
L
Freelander 1 2005 Land Rover Freelander 1 HSE - Loose Gear Selector in Automatic Transmission
Replies
3
Views
587
Hippo
Hippo
Back
Top