What have you done to your Freelander today

terr · Jul 25, 2015

i put my prop back on today

DastardlyDan · Jul 26, 2015

Stripped off the last remaining "decent" bits off the hippo. Including the aircon switch, so it can be modded for another use in the next one

Also found out, the turbo was fitted with:
one manifold bolt sheared, but just thrown in.
one turbo to manifold nut, not doing anything (seized halfway down the stud)
two of the turbo elbow bolts finger-tight
one of the drain pipe bolts finger tight
One of the two EGR bolts... missing

So no doubt, I was losing out on a bit of power, lol

B34R · Jul 27, 2015

Fitted the voltmeter and old radio from my runaround...

CuRbY · Jul 27, 2015

B34R said:
Fitted the voltmeter and old radio from my runaround...

Nice PMR rig.. what your call sign..?? I take it youre a licenced Amature ??

Pompey68 · Jul 28, 2015

B34R said:
Fitted the voltmeter and old radio from my runaround...

I see you are using an aftermarket stereo. Is there a patch cable for the steering wheel controls available?

CuRbY · Jul 28, 2015

RIGHT try again..
Got my Hippo back,
Not what have I Done to to my landy, but more to what my machanic has done to her..

New multilayer head gasket
Water pump
Thermostat
Espantion tank cap
Cam belt
Spark plugs.
Oil filter
Oil
Air filter
Mini service
Now sound sweet

Few things to replace soon tho..
HT LEADS & DIZZY CAP
replace oil after Approx 500 miles
Still check coolant ever so offen..
At least it's not over heating

Still need to sort a suspected heater matrix issue..??.as passenger floor is damp..but will check door, windscreen and other seals..

B34R · Jul 28, 2015

Pompey68 said:
I see you are using an aftermarket stereo. Is there a patch cable for the steering wheel controls available?

Honestly no idea, I didn't think it worth the effort, even in the RX8 where the steering wheel controls are really well laid out, I still find myself reaching for the main controls.

B34R · Jul 28, 2015

CuRbY said:
Nice PMR rig.. what your call sign..?? I take it youre a licenced Amature ??

It's actually locked off and attenuated to approximate legal output on the PMR license free band.
Have to be careful with it, when in high power mode it's capable of blasting out at 70 watts

Will be doing my license this winter I think to allow higher powers~

GrumpyGel · Jul 28, 2015

CuRbY said:
Espantion tank cap

Be careful that the actual bottle is OK - they craze around the top by the cap and leak. Would be a shame after all that work for something simple like that to still cause problems - worth a check.

CuRbY said:
Still need to sort a suspected heater matrix issue..??.as passenger floor is damp..but will check door, windscreen and other seals..

Funny you should say that - cos my 'matrix is leaking', but the coolant levels are not dropping! Funny, it appears to have started after replacing the windscreen!!

CuRbY · Jul 29, 2015

Well took the boys horse riding today in Melton.. and on the way back approx 2-3 miles from hom the car started to over heat!! which i thought was Odd.. I had checked the coolant before we left melton as was adviced to keep a eye on it for the next week,, while things settle in..fair enough..
but for the needle to almost reach the RED was very worring to say the least... rang the machinaic.. told me to let her cool down abit... and try and get her home which i did.. So just waiting for him to come out and check it.. seems like it leaks while after a good run and cooling down from that is more prominit to leaking.. which he found odd as it was holding under pressure..

but all the work he has done is under warrenty anyhow.. just hoping it isnt anything other that what he has done.. that will result to more money ..last thing we need.. as we need a ar with having two Autistic children and need to get them to their activities..

Not feeling the happy bug at the moment.. GUTTERED aint the word..

td4van · Jul 29, 2015

Put the spare on as have a puncture

Hope they can fix it else I'll be scrapping a less then 1000 mile Michelin Latitude Cross tyre

openfold · Jul 31, 2015

Pompey68 said:
I see you are using an aftermarket stereo. Is there a patch cable for the steering wheel controls available?

halfords will sort you out or you can do a search, mine is an 02 td4 and this is a picture of the part number of the one i needed. hope this helps. i think i needed another one also but i cant remember but halfords can get the one(s) you need

Pompey68 · Jul 31, 2015

openfold said:
halfords will sort you out or you can do a search, mine is an 02 td4 and this is a picture of the part number of the one i needed. hope this helps. i think i needed another one also but i cant remember but halfords can get the one(s) you need

View attachment 88910

Thanks Mate!!

timster66 · Jul 31, 2015

openfold said:
halfords will sort you out or you can do a search, mine is an 02 td4 and this is a picture of the part number of the one i needed. hope this helps. i think i needed another one also but i cant remember but halfords can get the one(s) you need

View attachment 88910

Saw two of these on eBay the other day, £20 I think they were if you want to have a look

Tim.

Winu · Aug 1, 2015

Hard job... and nightshift

Left one - New MAF, two last aux instruments for engine parameters (EGT + Boost) , couple of wires and vac lines. Next step is new ECU map, and final setting up on dyno.
Right one - MBC valve by turbosmart, new vac lines, ECM "piggyback" for fuel quantity and of course dyno setting up.
Maybe in middle of Sep i will have some dyno graphs

htr · Aug 1, 2015

First oil & filter change since getting it going, swapped tyres [front to rear & vice versa], fitted LED reverse lamps.

Volusia · Aug 1, 2015

Wire brushed the underside and coated it with Hammerite. Didn't take long as she's never been driven off road.

B34R · Aug 1, 2015

Parked her up and took the RX8 down south for a jaunt... which I regretted.
Got halfway back and realised she wouldn't pull through to 9000 rpm in higher gears on the motorway, had a look around and the trailing spark plug lead on rotor 2 had vibrated off. Swine to get at too as the plugs are on the passenger side of the engine block, and the only way to get in is through the wheel arch:

Tempus Fugit · Aug 7, 2015

Replaced these:

with these:

Back on now.

Tiny1000 · Aug 7, 2015

I repaired mine a couple of weeks ago...It's hard to believe how much that crapy plastic coating hides

What have you done to your Freelander today

Active Member

Active Member

Active Member

Member

Member

Member

Active Member

Active Member

Well-Known Member

Member

Well-Known Member

Member

Member

Member

Active Member

Well-Known Member

Active Member

Active Member

Well-Known Member

Active Member

Similar threads