What have you done on your 90/110/130 today?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
new to all this said:
Yes. Most of the secondhand ones were being sold for a reason! I had been looking for a while but people wanted crazy amounts for ones available and then would have needed re covering. Luckily no safari lights as hard top so slightly easier to fit. Quite thick fibre glass so will last I think but didn’t help with the fettling to fit as not much give.
Click to expand...
Is the front section in one part and the rear section in two parts?
They seem to get good reviews, all insulated above it?
 
Hicap phill said:
I have had the truck cab version over 6years now & cant fault it.has a moulding for radio & speakers. Not covered it with fabric. Yep they are pricy… but worth it.
Click to expand...
I think my added difficulty was it was a pickup conversion to hard top so possibly not everything square. We did our best. Definitely needs two people. Wife was very thrilled to be a prop for the afternoon.
 
Took it for a test drive…. p gasket is leaking, bolt is seized 🥲
 

Attachments

  • IMG_9181.jpeg
    IMG_9181.jpeg
    1.6 MB · Views: 1,424
Secured bargain replacement 12L 200tdi for my engineless 110 project that I bought a transmission for last week. In the boot of a Clio 4, in my defence it was 240kms away and my mrs wanted to go to Ikea which was near to it so during a "quick detour to pick something up" into the hatchback it went. She said the steering felt a bit odd, but it made it home fine.
All unloaded now and not a mark on the car. So far it looks like someone already fitted it to a 90/110 transmission but left all the lower flywheel to gearbox studs off that didn't line up and the gasket between the block and bell housing peed oil out and lubricated the clutch etc copiously. In no rush so have time to take it apart and run the measuring sticks over the innards and see what needs fettling.
 

Attachments

  • 200tdi_clio.jpg
    200tdi_clio.jpg
    392.2 KB · Views: 81
Did a few little jobs on the Ninety to help cut down on some rattles.
Also refitted front head lining with a few little mods, will get recovered sometime this year, black probably.
 

Attachments

  • 20240331_144247.jpg
    20240331_144247.jpg
    381.6 KB · Views: 77
  • 20240331_144315.jpg
    20240331_144315.jpg
    199.8 KB · Views: 78
  • 20240331_144305.jpg
    20240331_144305.jpg
    414.3 KB · Views: 71
  • 20240331_144255.jpg
    20240331_144255.jpg
    383.1 KB · Views: 74
  • 20240401_114005.jpg
    20240401_114005.jpg
    366 KB · Views: 94
  • 20240401_114028.jpg
    20240401_114028.jpg
    266.9 KB · Views: 97
RustyDefender said:
well started to install the windscreen.. then CRACK
Click to expand...
SNAP!, I mean crack!
I did exactly the same being careful with my new screen. 2nd new screen I had a windscreen fitter do it, did it in no time with very little effort . I was way more careful, faulty screen I reckon, that's my excuse anyway.
 
Changed the speedo, gauge and clock bulbs for LED's from Fourby (link below) , easy enough to fit, recommend taking the speedo cable off in order to give more wiggle room. definitely brighter and can't wait to see what they are like at night. got them of their Ebay store as they were slightly cheaper than buying off their website and paying postage.

LED clock bulbs
 
Anaconda said:
SNAP!, I mean crack!
I did exactly the same being careful with my new screen. 2nd new screen I had a windscreen fitter do it, did it in no time with very little effort . I was way more careful, faulty screen I reckon, that's my excuse anyway.
Click to expand...
Yeah I got one to come fit it today.. he cracked that one
 
drfoster said:
Changed the speedo, gauge and clock bulbs for LED's from Fourby (link below) , easy enough to fit, recommend taking the speedo cable off in order to give more wiggle room. definitely brighter and can't wait to see what they are like at night. got them of their Ebay store as they were slightly cheaper than buying off their website and paying postage.

LED clock bulbs
Click to expand...
I did the same. Very good product. Unfortunately, two of the holders for the bulbs inside the dash were damaged prior to my ownership so I’ve got to make a repair to fit a couple of LED’s.
 
You must log in or register to reply here.

Similar threads

DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
665
miktdish
miktdish
F
What have you done with your series today?
Replies
4
Views
1K
Frustrated Seriesist
F
Blob
L322 Let's have your technical opinions then. Coolant leak and cracked manifold?
2
Replies
24
Views
4K
Blob
Blob
Hippo
What have you done to your tratter today?
2 3 4
Replies
70
Views
7K
IamRobbie
IamRobbie
Hippo
What have you done to your tratter today?
2
Replies
35
Views
4K
dominicbeesley
dominicbeesley
Back
Top