What have you done on your 90/110/130 today?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Found that the rear diff pionion iol seal is leaking. As the axle will be replaced with a disco rear axle at some point, I’ll just keep an eye on the axle oil level for now...:rolleyes:
 
My new temp sender arrived from Steve Parker.:) As did my breaker bar and impact adaptor set. Mrs K noticed that I’d been shopping online... :rolleyes:o_O
 
Got all but three bolts off the NAS step, now stuck with three sheared in a spot with no access…..Grrrr

Got rid of the corrosion in the tub and etch primed

Got the new hinges on though, now the doors shut which is a bonus….
 

Attachments

  • 24641783-1073-4512-8C79-F4A64BC373F4.jpeg
    24641783-1073-4512-8C79-F4A64BC373F4.jpeg
    204.2 KB · Views: 128
  • 9F5FC07F-1AA5-45D3-A026-27274CF26028.jpeg
    9F5FC07F-1AA5-45D3-A026-27274CF26028.jpeg
    197.7 KB · Views: 140
  • 52B73C78-E603-408F-8EB3-4C737A71C61D.jpeg
    52B73C78-E603-408F-8EB3-4C737A71C61D.jpeg
    165.1 KB · Views: 127
So we did a camping trip to test the work out we have done.. enjoyed it a little to much and have ended up with a roof tent, annex and side awning. Hoping to keep the ability to sleep inside if weather turns . Also orderded a swing away wheel carrier... spending got a bit out of hand the Defender seems to have that effect
 
I've been on with the scotch pad on the tar brush paint job the previous owner had spread on over the blemishes , once off I'm then bringing the paint back with the machine polisher , it's not beautiful but it's original with lashings of patina , just want to get it tidy for the moment while I aquire all the bits on the landy shopping list
 

Attachments

  • Screenshot_20210902-171717_Gallery.jpg
    Screenshot_20210902-171717_Gallery.jpg
    279.8 KB · Views: 133
Determined to stop oil leaks... so step 47373 today. Not sure how many other steps I can do new breather, gasket etc! ;) fingers crossed. If I still have a leak its staying..
 

Attachments

  • 20210902_182934.jpg
    20210902_182934.jpg
    271.1 KB · Views: 118
Uragasuido said:
Drove to Dundee and back to Glasgow, then fitted the new Momo wheel and security device. Hopefully over the next couple of days will fit the new console binnacle as old one is hanging off and cracked.
Click to expand...

Nice wheel ... i've got a new, crinkle black, steel binnacle in the garage, was going to fit it but the plastic one I had was good so didn't.
It owes me £50. Am in Lanark
 
miktdish said:
Fit a new seal. AAU3381, they are les than £5. Dead easy, it takes about 10 mins (once the prop is off)
Click to expand...
Nice one, thanks for the advice. I’m still on the hunt for a replacement axle anyway so if I get one soon enough, I’ll strip the old axle and replace the seal and keep the diff as a spare.
 
You must log in or register to reply here.

Similar threads

DefendingLancashire
300TDI Four-parter: brake wear, lift pump / fuel filter, turbo, and bushes / squeaking
Replies
13
Views
493
miktdish
miktdish
F
What have you done with your series today?
Replies
4
Views
1K
Frustrated Seriesist
F
Blob
L322 Let's have your technical opinions then. Coolant leak and cracked manifold?
2
Replies
24
Views
4K
Blob
Blob
Hippo
What have you done to your tratter today?
2 3 4
Replies
70
Views
7K
IamRobbie
IamRobbie
Hippo
What have you done to your tratter today?
2
Replies
35
Views
4K
dominicbeesley
dominicbeesley
Back
Top