What does this canvas fit?

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
That is not as described in advert...
First pic shows on right ..cab roof...on left..rear with window...top and bottom...side panels showing to left the overflaps for rear window panel...to many hoops and also says side window needs replaced there is no side window...
 
Last edited:
Blackburn said:
The piece you think is the roof goes down the cab rear not long enough for roof section.
Click to expand...
Its got the fittings on it to hook onto the sharks tooth bar.
Anyway I don't think the seller knows what it is if he thinks the side window is actually the rear one.
 
If it’s got the sharks teeth front it’s too short for a 109 truck cab but it seems to have enough sticks for a 109 cab. It’s not got the front sticks for the full tilt. Looks like a mish mash.
 
John S said:
If it’s got the sharks teeth front it’s too short for a 109 truck cab but it seems to have enough sticks for a 109 cab. It’s not got the front sticks for the full tilt. Looks like a mish mash.
Click to expand...

Have you read the ebay description?...it says its the canvas for the rear of an mod 109 truck cab why would it have the sharks teeth fitment clearly seen in the photo of it upside down...no side window either...
 
Shippers said:
Have you read the ebay description?...it says its the canvas for the rear of an mod 109 truck cab why would it have the sharks teeth fitment clearly seen in the photo of it upside down...no side window either...
Click to expand...
Yes I’ve seen and I’ve got one (SWB) . You’re right it doesn’t have side windows; it’s what I said; the canvas is for a SWB but the sticks are sort of for a 109 but not full tilt just a pick up. It’s a muddle offer.
 
Okay, have a look at these.
 

Attachments

  • 530F5371-5188-4F89-9730-0A652DBBEB49.jpeg
    530F5371-5188-4F89-9730-0A652DBBEB49.jpeg
    330.2 KB · Views: 140
John S said:
Yes I’ve seen and I’ve got one (SWB) . You’re right it doesn’t have side windows; it’s what I said; the canvas is for a SWB but the sticks are sort of for a 109 but not full tilt just a pick up. It’s a muddle offer.
Click to expand...

The canvas is for a SWB what according to you...the description says truck cab does it not?
 
John S said:
If it’s got the sharks teeth front it’s too short for a 109 truck cab but it seems to have enough sticks for a 109 cab. It’s not got the front sticks for the full tilt. Looks like a mish mash.
Click to expand...

Thats where you were getting me confused...was only replying dont get upset...
 
it is missing the shark tooth rail and the over door pieces:
upload_2020-6-2_8-4-45.png


It also has too many hoops to be a 109, and not enough the cross brace side side pieces, even if it was for a truck cab and was just the load bay cover it is mising the peices that attache the canvas to the back of the truck cab.

I think the reality of it is is it is an incomplete 88 hood frame (missing the over door sections), with some extra hoops (for some reason), and a very very old and worn 88 canvas.
upload_2020-6-2_8-8-25.png
 
tottot said:
The canvas is for an 88 truck cab. [ and it is well past its sell by date ]
Click to expand...
I agree that is is well past its sell by date but I do not agree it is for a truck cab. I think it is just a standard 88 canvas with plain sides rather than windows. It is not either of these which would be for a truck cab:

upload_2020-6-2_19-31-44.png
upload_2020-6-2_19-32-2.png
 
You must log in or register to reply here.

Similar threads

K
What money should I be asking?
2
Replies
27
Views
4K
Karls
K
N
Multiple water leaks Discovery 2
2
Replies
28
Views
3K
Bone9
Bone9
DPG213
Hardtops and interchangeable parts
Replies
3
Views
834
Blackburn
Blackburn
wireman
'Very Rare' Series 2a on ebay...
Replies
19
Views
2K
Palagius
Palagius
T
Adding rear seats to my Series 3 88"
Replies
17
Views
3K
300bhp/ton
300bhp/ton
Back
Top