What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Grrrrrr said:
I had a drive in a friend's Jaguar F-pace SVR yesterday. Incredible piece of kit. Floor it and there's a low growl and you're forced back into your armchair as a mad-max whine builds from the front. It feels like you're doing 30 mph but the speedo whips round like a fat-man landing on the kitchen scales.
Click to expand...
Yep that sums it exactly, that and the fuel gauge dropping, he has it up for sale really loves it but the consumption to work is killing him ☹️
 
Anyone know if this guy in the centee is supposed to look so chewed up? Looks like someone has gone to town with a screwdriver. Can't be right, can it?
20231118_105024.jpg
 
RangeRoller dt said:
if that’s the level of accuracy required from factory wouldn’t think would hurt to smooth it out with a dremel, Betterer flow perhaps?
Click to expand...
Pretty sure all that comes through there is fuel returned from the spilloff pipes. The main fuel supply comes into the main body of the pump below the QA block. I just hope none of the "precise engineering" breaks free as it'd write off my pump.
 
Well I fixed the cut out at idle issue, but now have a rough idle, and more importantly, still seem to be leaking fuel. The sensor at the rear of the pump under the head. I assume that is wet, since it has an oring. They a likely failure point? Because the other option is the head is still leaking and I potentially have an even bigger issue on my hands.
20231119_122721.jpg
 
Bix said:
Well I fixed the cut out at idle issue, but now have a rough idle, and more importantly, still seem to be leaking fuel. The sensor at the rear of the pump under the head. I assume that is wet, since it has an oring. They a likely failure point? Because the other option is the head is still leaking and I potentially have an even bigger issue on my hands.
View attachment 302981
Click to expand...

Possibly. Normally it is the top one or the one below that or the oval ones each side where the spring pops out.

If it has done 150k miles on the original pump I'd be tempted to get a refurbed one off Diesel Jones in Manchester and have done with it.
 
Not mine I'm pleased to say but just seen the owner of our local supermarket on the road in his RR Sport, looked like it was on stilts, suspension fault or is it possible to drive at speed at wade height?
 
Grrrrrr said:
Possibly. Normally it is the top one or the one below that or the oval ones each side where the spring pops out.

If it has done 150k miles on the original pump I'd be tempted to get a refurbed one off Diesel Jones in Manchester and have done with it.
Click to expand...
Either I am on crack, or I can't find the P38 on their website. The pump is a recon unit from 2017ish. I kinda expected it to last longer than this.
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
2K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
535
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
717
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
799
Grrrrrr
Grrrrrr
Back
Top