1988smithy
Well-Known Member
- Posts
- 4,044
- Location
- West midlands
2010 on just had different tolerances going by this
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Scotiawhiskers
Well-Known Member
- Posts
- 877
- Location
- Manchester
Uncovered him, took off the battery charger and dehumidifier. Started first turn of the key, steady running with no throttle needed.
Took him out for a short jaunt, about 8 miles. Gears and drive smooth, forgot the GPS speedometer so don't know if the speedo was playing up.
Revved him to the limiter through 2 gears from the lights when hot, smooth and steady all the way.
Got home and parked him. Hot restart after 20 seconds was faultless, as was the 20 minute starting check.
Relay swap appears to have made him well again.
Just an interior mirror to sort and he can go for his MOT that is due by mid December.
Took him out for a short jaunt, about 8 miles. Gears and drive smooth, forgot the GPS speedometer so don't know if the speedo was playing up.
Revved him to the limiter through 2 gears from the lights when hot, smooth and steady all the way.
Got home and parked him. Hot restart after 20 seconds was faultless, as was the 20 minute starting check.
Relay swap appears to have made him well again.
Just an interior mirror to sort and he can go for his MOT that is due by mid December.
badfluffy
Well-Known Member
- Posts
- 2,132
- Location
- northampton
had to call into the farm so had a quick look at p38 its still up at full height were i left it up on sunday
doriz
Well-Known Member
- Posts
- 17,312
What do you mean, extended mode?
badfluffy
Well-Known Member
- Posts
- 2,132
- Location
- northampton
its highest level
stuu
Well-Known Member
- Posts
- 1,946
- Location
- Aberdeenshire
Its done all the important stuff taking my skid car back and forward too track and being loaded with wheels and iv just realised its give or take a year iv had it so mot will be due soon, il have to ring round and just chuck it in and pray for a pass as i haven't got time to look over it,
gold rover
Well-Known Member
- Posts
- 10,240
- Location
- dùthaich Dhè fèin
Yesterday made the arduous journey to 'civilisation'. As The Golden Girl was due her MoT. Happy Dance time, she passed. Approx 3000 miles done since the last one.
stemac33
Well-Known Member
- Posts
- 550
- Location
- Accrington, Lancs
Anyone know if seatbelt stalks are interchangeable left to right or vise versa
stemac33
Well-Known Member
- Posts
- 550
- Location
- Accrington, Lancs
Can confirm they are compatible, drivers seatbelt stalk decided it wasn't going to let me wear my seatbelt, no matter what I tried it wouldn't clip in. Took it off after work and swapped it with the passenger side one, you just got to change the tabbed washer at the bottom which is only held on with a fibre washer. Took the knackered one apart and the spring fell out in several bits, got to find one that will fit now. Looked at replacements and the want £40 plus for them
, sod that. I'll find a spring.
, sod that. I'll find a spring.
Scotiawhiskers
Well-Known Member
- Posts
- 877
- Location
- Manchester
Stalk /mount may be different but I think from the look that all buckles and latches are pretty much the same everywhere. So you may get lucky with mechanism and spring from any car?Can confirm they are compatible, drivers seatbelt stalk decided it wasn't going to let me wear my seatbelt, no matter what I tried it wouldn't clip in. Took it off after work and swapped it with the passenger side one, you just got to change the tabbed washer at the bottom which is only held on with a fibre washer. Took the knackered one apart and the spring fell out in several bits, got to find one that will fit now. Looked at replacements and the want £40 plus for them
stemac33
Well-Known Member
- Posts
- 550
- Location
- Accrington, Lancs
Found a spring, cleaned everything up, greased and put back together, works like a dream, even stopped the annoying rattle on it 
- Posts
- 33,600
- Location
- North Shropshire
done some more digging on the front suspension.. i'm not sure that camber isnt normally something that needs to be changed, more likely (despite having MOT last week) theres a bush that is worn/seized etc
gold rover
Well-Known Member
- Posts
- 10,240
- Location
- dùthaich Dhè fèin
Haven't done anything to her but discovered , put Range Rover in front of a part number, prices are 'interesting'. Discover same part also fits Freelander and the price is at least 50% less. In this case the boost control solenoid!
stuu
Well-Known Member
- Posts
- 1,946
- Location
- Aberdeenshire
Had a bit of free time planned to go upto unit and see whats needed for mot,
But instead if found why my heated windscreen doesn't work connectors torn off windscreen which doesn't suprise me as who i got the motor off had the windscreen put in from his tdv8 which unsurprisingly blew the turbos and took the engine with it,
On the plus side i got my heated steering wheel working again oh boy iv missed that,
But instead if found why my heated windscreen doesn't work connectors torn off windscreen which doesn't suprise me as who i got the motor off had the windscreen put in from his tdv8 which unsurprisingly blew the turbos and took the engine with it,
On the plus side i got my heated steering wheel working again oh boy iv missed that,
brianp38dse
Well-Known Member
- Posts
- 20,065
- Location
- heathrow
Been driving sons supercharged sport around again I could really get to like it apart from the fuel bill but he did give me his card to put some juice in
- Posts
- 33,600
- Location
- North Shropshire
Is it just me or is this guy a nob?
Full workshop so not his first rodeo..
Calipers off, can see the fronts are all manky but won't spend an hour on preventative maintenance and pull the pistons? Rather spend time repainting. If they aren't cleaned up now then they'll need it in 6 months, judging by the video.
Or am i being silly?
Full workshop so not his first rodeo..
Calipers off, can see the fronts are all manky but won't spend an hour on preventative maintenance and pull the pistons? Rather spend time repainting. If they aren't cleaned up now then they'll need it in 6 months, judging by the video.
Or am i being silly?
Datatek
Well-Known Member
- Posts
- 44,886
- Location
- Near Poitiers SW France
These days, image is so much more important than substance, you cannot see the caliper pistons when the caliper is refitted so they really don't matter
- Posts
- 33,600
- Location
- North Shropshire
When the caliper is off, seems mad not to. Plus easier pulling and cleaning a free piston vs a seized oneThese days, image is so much more important than substance, you cannot see the caliper pistons when the caliper is refitted so they really don't matter
But then i suppose you curse land rovers for being crap
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
I had a drive in a friend's Jaguar F-pace SVR yesterday. Incredible piece of kit. Floor it and there's a low growl and you're forced back into your armchair as a mad-max whine builds from the front. It feels like you're doing 30 mph but the speedo whips round like a fat-man landing on the kitchen scales.
