- Posts
- 33,600
- Location
- North Shropshire
you can only select each gear in manual low, or does the book mean select R and D when it says select all gears? i dont know, but dont see any harm in selecting each number
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
What are you on? You can select PRND321 in Hi Range. Same in Lo range but the gearbox operation is different.
- Posts
- 33,600
- Location
- North Shropshire
I understood the shifter in hi, limited the highest gear but would always start off in 1. Ie select 3 and it would start in 1 then auto up to 3.
If you select low manual, it will lock in whichever gear you select and never change and you can force it into each actual great ratio
Thus, if you select R D 3 2 1 in hi, the box (while stationary) will only select R and 1
If I remember rightly though in high range, 321 basically work the same as D as in they will use all gears up to the number you have selected so in theory putting it in Hi 3 and foot on the brake technically the gearbox is still in first up until it moves and needs to use 3. Where as in low range I think it actually specifically locks it to the gear number you are selecting. Though I could be totally wrong on all that admittedly.
- Posts
- 33,600
- Location
- North Shropshire
But maybe it doesn't matter, select R and D, the box is pressurised, regardless which clutches are open or closed
Datatek
Well-Known Member
- Posts
- 44,887
- Location
- Near Poitiers SW France
Actual engagement of gears is speed dependent so running through the gears is about filling the galleries with oil. No mention of doing the run through in low range in the ZF manual and of course most vehicles fitted with the ZF4HP22/24 do not have a low range.
- Posts
- 33,600
- Location
- North Shropshire
Probably me over thinking things, as usual
To be fair I thought the same thing, but yeah what Datatek says makes sense too so, when it comes to hopefully getting that fill plug off I'll just do it through Hi range then.Probably me over thinking things, as usual
Vogueman
Well-Known Member
- Posts
- 213
- Location
- West Yorkshire
Getting ready for a well deserved holiday, gave her good wash and polish, which was like painting the forth road bridge. It is worth it tho', I then noticed that the new powder coated alloys were looking very smart, not the centre badge tho'. Back to the interwatsit, the prices were all over the place, from £35 EACH, to £56 for 4, for a bit of plastic. I was amazed, not to worry, back to the search engine, about half way down the page....was ETSY, what, I need to have a look at this. £14 for 4, hand made it said, I will have £14 quid of that. here they are and very good too with gold lettering to boot.
Last edited:
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
I believe you are correct, although I haven't played with the autobix so much. Rather a nice touch by Land Rover that. Gives maximum control off-road.
gold rover
Well-Known Member
- Posts
- 10,240
- Location
- dùthaich Dhè fèin
Morning all. I haven't done anything yet, but need tomlook at the stereo unit. I know we have hundreds of threads and posts on stereo issues BUT...... I can't find any step by step for checking the DSP. After a couple of weeks without a stereo and blaming the battery, it's time to look elsewhere. Which leads to the DSP, especially as the DSP selection disappeared off the screen when the stereo decided not to play.
Anyone able to find a step by step, as I can't. Oh and search bar doesn't like just 3 letters
Anyone able to find a step by step, as I can't. Oh and search bar doesn't like just 3 letters
Spat mouth wash all over the inside of the the drivers window…
Just got to the dentist and thought I would have some mouthwash before I went in but my body decided it wanted to cough when it was in my mouth…. At least the car will smell minty fresh now.
Just got to the dentist and thought I would have some mouthwash before I went in but my body decided it wanted to cough when it was in my mouth…. At least the car will smell minty fresh now.
- Posts
- 33,600
- Location
- North Shropshire
Fink i need a new starter button, every now n then you hear the starter engage then immediately disengage and the dash goes off. Assume the switch contracts are going bad and it's registering a double press instead of just a press.
Unless it's anything else? Maybe i need to test summat
Gotta love the landy brand
Unless it's anything else? Maybe i need to test summat
Gotta love the landy brand
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Fink i need a new starter button, every now n then you hear the starter engage then immediately disengage and the dash goes off. Assume the switch contracts are going bad and it's registering a double press instead of just a press.
Unless it's anything else? Maybe i need to test summat
Gotta love the landy brand
Sounds more like the starter sticking. A blast of air might remove any dust inside.
- Posts
- 33,600
- Location
- North Shropshire
do you mean the starter solenoid, rather than the starter? starter goes with gusto 9/10 times
Fink i need a new starter button, every now n then you hear the starter engage then immediately disengage and the dash goes off. Assume the switch contracts are going bad and it's registering a double press instead of just a press.
Unless it's anything else? Maybe i need to test summat
Gotta love the landy brand
Lazy brake pedal application, or pedal switch
.J
- Posts
- 33,600
- Location
- North Shropshire
i've noticed it stops cranking if you take your foot off the brake.. which is weird.. but the dash stays 'on' ie position 2Lazy brake pedal application, or pedal switch
J
in my case it goes black like its switched off, with just the P and yellow SRS light
Switching off it does if you dont push the pedal.
I get P and the handbrake light (M obviously put it on last time she stopped) The srs is wierd
Hang on while I switch to the I pad
.J
When I unlock and get in I see this
If I push the button I get this.
If I push the pedal but release early so it doesn’t start, I get this.
J
- Posts
- 33,600
- Location
- North Shropshire
I'm going to have to do a photo run now, arent i!!
its going to behave for weeks now, until the time i forget to have my phone ready
I've noticed some times, if i let the screen go to sleep, then sneak up and press start.. the engine is running before the dash has woken up
which i assume is just one of those things.. i'm the same sometimes 
