There are some but last check not much availability at short notice. Would probably need 3 of them
3
how much **** you got
J
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
3
how much **** you got
J
- Posts
- 33,600
- Location
- North Shropshire
Lots3
how much **** you got
J
- Posts
- 33,600
- Location
- North Shropshire
Wish i had a proper house with outbuildings
- Posts
- 33,600
- Location
- North Shropshire
If i had some land too could build a LZ offroaderer courseWish i had a proper house with outbuildings
Last week I finally got round to swapping out, sorry about the americanism, the TC on my l322 Rangey. Easy enough being I have an hgv pit too work in. I decided to invest in a pit jack for the gearbox removal and so glad i did, by heck that ZF6 hp28 is a hefty bit of kit, not like my old Ford Angle box gear box I used to take out on occasion in the 70s. Smashin job and now drives a dream, took her for a 400 mile spin to pick up the grand kids for a week 1/2 term break with grand pa. Then it happened, went into limp mode a mile from home. Oh well that's the nature of the beast, cure one problem then wait for the next, even so I love the car and wouldn't swap her for the world.
- Posts
- 33,600
- Location
- North Shropshire
What's the practicalities of using exhaust wrap instead of regular heat shields on the v8, anyone done it? Wondering if there's room for doing the manifold bolts up if the pipes are thicker with the added wrap
brianp38dse
Well-Known Member
- Posts
- 20,065
- Location
- heathrow
A few on here have binned the heat shields and used the rap with stainless ties.
Salisbury Nick
Well-Known Member
- Posts
- 790
- Location
- Dorchester
awesome. but really! those gas prices! **** me no wonder we have climate change!
- Posts
- 12,628
- Location
- Sud ouest France !
A mile or 200 mile, she's got your back!! Well, when it suits her
- Posts
- 33,600
- Location
- North Shropshire
High fuel prices aren't the way to tackle carbon emissions, just a way to get rich
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
+1. No issues although it won't last as long as the shields.
- Posts
- 19,297
- Location
- Buckinghamshire, UK. ('95 DT)
Argh just had a new the kicking out date of my dad's storage.. 4 weeks
Council got any garage units?
- Posts
- 33,600
- Location
- North Shropshire
I've not seen any round here. Well, there were some but got knocked down for houses
- Posts
- 33,600
- Location
- North Shropshire
Have you seen the price of new shields!?
Tricky of York
Well-Known Member
- Posts
- 622
- Location
- York
Great drive for the grandkids and limp mode excitement thrown in, it’s what my family have come to expect on a day out. We’re now at the time of year to take hats, coats, food and drinks even on the shortest trips because with a Range that’s all part of the journey. Recovery membership fully paid up.
Tricky
Enthusiastman
Well-Known Member
- Posts
- 1,016
- Location
- AS LONG AS ITS NOT ****ING WALES!!!!
arhhhh, " bummer " LOLToo late me old chum, everyone knows
Enthusiastman
Well-Known Member
- Posts
- 1,016
- Location
- AS LONG AS ITS NOT ****ING WALES!!!!
Fitted my new " HAWKE " bespoke made Stainless Steel exhaust tail pipes to my L405 Turbo Diesel today. Bought them off ebay from a company called supertweaks. The quality is awesome and they are bespoke made for a 100% fit. Cost was only £162.00 delivered via UPS and they have lots of pairs in stock ready to post out. For a small extra charge they also do Black tips.
I have been toying for months about upgrading my rear end to the later 2018 model which had pronounced exhaust exit tails but the costs was huge so i stumbled on these beauties and i am glad i did as have saved a fortune.
If you want to upgrade your L405 or other model Rangies with a pair of these then look at their shop on ebay as they also do them for other model Range Rovers.
Took me 10 mins to fit them both and they also have a security strap welded on and a U clamp which bites on to it so they cannot fall off if the allen key bolts worked loose albeit they do bite up tight so no chance of it happening. Really pleased with them.
I have been toying for months about upgrading my rear end to the later 2018 model which had pronounced exhaust exit tails but the costs was huge so i stumbled on these beauties and i am glad i did as have saved a fortune.
If you want to upgrade your L405 or other model Rangies with a pair of these then look at their shop on ebay as they also do them for other model Range Rovers.
Took me 10 mins to fit them both and they also have a security strap welded on and a U clamp which bites on to it so they cannot fall off if the allen key bolts worked loose albeit they do bite up tight so no chance of it happening. Really pleased with them.
Attachments
- Posts
- 4,653
- Location
- Rotherham
Enthusiastman
Well-Known Member
- Posts
- 1,016
- Location
- AS LONG AS ITS NOT ****ING WALES!!!!
Cheers mate and yes my mancave is exactly that. CLEAN. LOL.Very nice but can I just say that workshop looks too clean to be real
Had it built 6 years ago to house all my toys. I keep it immaculate in there always. OCD mate.
Attachments
- Posts
- 4,653
- Location
- Rotherham
