What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
kermit_rr said:
Not an easy task but you're probably right.
I can't track the squeak either! If i rev at idle i don't hear it, only accelerating in gear! Worried something is going to break
Click to expand...
Can you get someone in the car and in gear and have them labour the engine at around 1500rpm? With the handbrake on of course. Possibly it may give you an indication o_O
 
Mark Piercy said:
Can you get someone in the car and in gear and have them labour the engine at around 1500rpm? With the handbrake on of course. Possibly it may give you an indication o_O
Click to expand...
Tried it myself with the hand brake on and the brake pedal wedged.. no squeak.. i wonder if it only happens above 1st gear...i can test that..
 
kermit_rr said:
Nope, all gears but really have to floor it in 1st to hear it.. definitely engine related then and not a squeaky exhaust leak
Click to expand...
Thinking it could be the steering pump :eek: the oil colour is ok but it smells bad.. there's a bit of noise when i turn the pulley.. going to get the oil out of reservoir and put fresh in see if anything changes
 
Yesterday I was getting out of the VW and see some leaves in/door shut, pulled some out, and there was dirt as well got as much as I could out, but couldn't reach the rest of it, went into the kitchen got the kebab skewer out, and have a poke to get as much as I could out, then the next day, the vacuum cleaner and a jet of water from the hosepipe the photo is about 3/4 of what was in there, the other side was clear, didn't look like a mouse nest, but could have been found some seeds in it, but didn't smell of mice, but why would VW leave a big hole in the back of the wing, I am lucky there's no rust
20210917_162324.jpg
20210917_162319.jpg
 
well today i cleaned the l322 ,
wishing it was an l405
but then i got all patriotic and put up a birthday present from last October,
digging the hole involved the use of the biggest concrete breaker i have,a big n heavy one
it was supposed to be for the new house but that went..all threpenny bits up.
the instructions said..extra materials required 13 cubic feet of concrete (min) and 2 cubic feet of gravel..
i reckon something got lost in translation from mr lee and mr wun hung lo !
IMG_20210918_141738178.jpg
IMG_20210918_141850660.jpg
IMG_20210918_141856687.jpg
IMG_20210918_141738178.jpg
IMG_20210918_141850660.jpg
IMG_20210918_141856687.jpg
 
Dopey said:
Yesterday I was getting out of the VW and see some leaves in/door shut, pulled some out, and there was dirt as well got as much as I could out, but couldn't reach the rest of it, went into the kitchen got the kebab skewer out, and have a poke to get as much as I could out, then the next day, the vacuum cleaner and a jet of water from the hosepipe the photo is about 3/4 of what was in there, the other side was clear, didn't look like a mouse nest, but could have been found some seeds in it, but didn't smell of mice, but why would VW leave a big hole in the back of the wing, I am lucky there's no rust
View attachment 248288 View attachment 248289
Click to expand...
Looks more copious, but less impacted than the crap that had accumulated in and seized Otto's lower tailgate locks. Cleared out and copper greased they became a thing of joy and beauty to use, instead of an invisible decoration.
 
dwarfer said:
well today i cleaned the l322 ,
wishing it was an l405
but then i got all patriotic and put up a birthday present from last October,
digging the hole involved the use of the biggest concrete breaker i have,a big n heavy one
it was supposed to be for the new house but that went..all threpenny bits up.
the instructions said..extra materials required 13 cubic feet of concrete (min) and 2 cubic feet of gravel..
i reckon something got lost in translation from mr lee and mr wun hung lo !
View attachment 248290 View attachment 248292 View attachment 248293 View attachment 248290 View attachment 248292 View attachment 248293
Click to expand...
Well done, you have it the right way up.... so many ppl dont
 
dwarfer said:
well today i cleaned the l322 ,
wishing it was an l405
but then i got all patriotic and put up a birthday present from last October,
digging the hole involved the use of the biggest concrete breaker i have,a big n heavy one
it was supposed to be for the new house but that went..all threpenny bits up.
the instructions said..extra materials required 13 cubic feet of concrete (min) and 2 cubic feet of gravel..
i reckon something got lost in translation from mr lee and mr wun hung lo !
View attachment 248290 View attachment 248292 View attachment 248293 View attachment 248290 View attachment 248292 View attachment 248293
Click to expand...
No hats on the lions today then ?
 
brianp38dse said:
i have just seen this on faceache :eek: words i dont know were to begin
242154157_590415222324006_4479135105668219325_n.jpg

your for £1500
Click to expand...
The doors look kinda good without the plastic trim. If you look past the rest of the tat, I could see P38s looking a lot better without the plastic trim on the side. I know my old CL55 did.
 
kds said:
No hats on the lions today then ?
Click to expand...
i had to take off the hats,
rain, but getting them some dark glasses so the can look like doormen,
ya names not daan' ya not comin in :D
im still lookig for the military gun, bofors should do nicely,,but at £11000 thats gonna have to wait.
 
  • Like
Reactions: kds
Why is it so frigging hard work to take the frigging rocker cover off!? Which baffoon thought it was a good idea to cover the drivers side cover with the upper plenum and a water pipe!? FFS should be a 10 mins job not several hours
 
Dopey said:
Well done, you have it the right way up.... so many ppl dont
Click to expand...
I laugh every time I pass a house near me. Typical english who "escaped England" , their words, because they had "holidayed here and loved the people and the place". So much so they have a tiny space, in a tiny front garden, with a massive flagpole, and a massive Union flag, because " well we are english" .
Yeah! Well excuse me whilst I laugh at your upside down flag.
 
kermit_rr said:
Why is it so frigging hard work to take the frigging rocker cover off!? Which baffoon thought it was a good idea to cover the drivers side cover with the upper plenum and a water pipe!? FFS should be a 10 mins job not several hours
Click to expand...
Think i need to get the engine out to sort this, doing my head in!! Every time i put it on the head, one corner pings off or another
 
You must log in or register to reply here.

Similar threads

A
Range Rover L322 - not turning over
Replies
12
Views
1K
gold rover
gold rover
B
L320 range rover sport 3.0 tdv6 loosing power steering fluid
Replies
3
Views
493
Mark Piercy
Mark Piercy
F
1980 Range Rover 2 door v8 to 300tdi
2
Replies
20
Views
1K
Grrrrrr
Grrrrrr
T
Non start
Replies
3
Views
712
Datatek
Datatek
T
Fan Clutch??
Replies
14
Views
788
Grrrrrr
Grrrrrr
Back
Top