- Posts
- 33,600
- Location
- North Shropshire
Did she put it in the microwave?
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 33,600
- Location
- North Shropshire
better than a fat phone and a bloody finger
He's not on here any more mate; left last year. Contactable via email
I can drop him a note if you don't have his details?
Yea that would be great thanks
No probs. Fired him an email.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Done a quick investigashun with my old Bosch filter I had fitted last oil change..
The syrup has been draining from its pleats for a good 2 weeks, the paper bosch use is really rather strong and still very stiff even after 5000 hard miles...
My best blunt stanley knife was tested to the max here.
What I'm looking for is metallic fragments and sludge/crap.
The pleats are put in the vice and squished to remove excess oil
BTW 10w60 with lucas is akin to maple syrup, no wonder it had a cam follower rattle when cold, my poor old oil pump
Upon closer inspection there is nothing untoward contained within the filter...
Well happy with that
The syrup has been draining from its pleats for a good 2 weeks, the paper bosch use is really rather strong and still very stiff even after 5000 hard miles...
My best blunt stanley knife was tested to the max here.
What I'm looking for is metallic fragments and sludge/crap.
The pleats are put in the vice and squished to remove excess oil
BTW 10w60 with lucas is akin to maple syrup, no wonder it had a cam follower rattle when cold, my poor old oil pump
Upon closer inspection there is nothing untoward contained within the filter...
Well happy with that
I have never don't it, but I was just thinking, if you spray it with a wheel cleaner and there is metal in it, it will go move, won't tell you how much, but it will show if there is??Done a quick investigashun with my old Bosch filter I had fitted last oil change..
The syrup has been draining from its pleats for a good 2 weeks, the paper bosch use is really rather strong and still very stiff even after 5000 hard miles...
My best blunt stanley knife was tested to the max here.
What I'm looking for is metallic fragments and sludge/crap.
The pleats are put in the vice and squished to remove excess oil
BTW 10w60 with lucas is akin to maple syrup, no wonder it had a cam follower rattle when cold, my poor old oil pump
Upon closer inspection there is nothing untoward contained within the filter...
Well happy with that
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Might do..
It's become a habit after the M62 I did had an oil pressure issue and lunched its main bearings, the filter was full of chunks
23108924
Well-Known Member
- Posts
- 131
- Location
- Shropshire
Gonna make Bix teach me how to fit my battery this afternoon and check out the refurb process for my alloys now they're off. And remind him to put air in his tyres for the 50th time.
Happy hump day all!
Happy hump day all!
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
23108924
Well-Known Member
- Posts
- 131
- Location
- Shropshire
Like the idea of humping but the rest can wait until it warms up.
It has to be a lot bloody warmer for any humping to take place! Maybe after he's done the work I MIGHT consider it
- Posts
- 4,653
- Location
- Rotherham
Rather big word is mightIt has to be a lot bloody warmer for any humping to take place! Maybe after he's done the work I MIGHT consider it
- Posts
- 12,628
- Location
- Sud ouest France !
Sometimes, Normally, should, maybe.....
All rather big words also.
All rather big words also.
- Posts
- 33,600
- Location
- North Shropshire
What does that make astronomical?
