Hello All, about a month ago I replaced the serpentine belt and tensioner on my P38 Vqgue, thinking it would cure the annoying whine, it didn't so I thought must be the idler below, as I was going on holiday a couple of days later I lived with it, until last weekend after spending 5hrs waxing it, I thought I've got to get rid of that noise, spoils the effect. So I ordered a new idler in steel from LR Series fitted it earlier, what a difference! had to check the rev counter to make sure it was actually running! the old plastic one had worn dangerously thin, strange though it was listed as a timing belt idler, part no PQR500060, the V8 doesn't have one?
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
lorri789
Well-Known Member
- Posts
- 4,657
- Location
- West Stirlingshire
Bonnet off, scuttle off (all on me own) and only managed to brake the bonnet light. Checked wiper motor and lubed everything. Cleaned all the leaves, droppings and general crap out. Sorta stumped now so just ordered a new wiper motor and wiper trailing arms.
lorri789
Well-Known Member
- Posts
- 4,657
- Location
- West Stirlingshire
A merry ####ing fiddle it was! Got there in the end with the help of a bush 
speedyyellow
New Member
- Posts
- 222
- Location
- Cambs/Beds Border
With the help of a member on here I got my non-starting heap off the main road and onto my drive ready to swear profusely at the starter motor bolts on Saturday.
odysseus
Active Member
- Posts
- 231
- Location
- Cambridgeshire
I helped a fellow member get his non starting P38 off the road and onto his driveway.
Earlier in the day, I fixed my drivers window which was starting to struggle to go up by drilling out a rattly rivet and replacing it with a proper nut, bolt and washers, and fitted a replacement door card.
Earlier in the day, I fixed my drivers window which was starting to struggle to go up by drilling out a rattly rivet and replacing it with a proper nut, bolt and washers, and fitted a replacement door card.
Deasy
Well-Known Member
- Posts
- 4,070
- Location
- Warwick-on-the-shire
Just sold the wifes SLK.
Like she wot want to give it back
odysseus
Active Member
- Posts
- 231
- Location
- Cambridgeshire
Just sold the wifes SLK.
What's the SLK replacement Martyn?
lgreen88095
Member
- Posts
- 55
- Location
- Essex
Mine is in my garage all polished up from last weekend, will bring it out this weekend for the nice weather
odysseus
Active Member
- Posts
- 231
- Location
- Cambridgeshire
She's getting the new Merc CLA AMG, needs a little more practicality with the new arrival due in Oct.
PS, she quite likes the P38 (thankfully after all the cash thrown at it this year),
Nice choice! I'm a big fan of Mercs, really good cars usually, especially now they've rediscovered some of their engineering quality.
I hope it serves her (and junior!) well.
- Posts
- 16,478
(Wrong thread James
)seanmull
Active Member
- Posts
- 375
- Location
- co. limerick Ireland
the gaskett was a 3 hole gaskett the pistons are seriously protruding i had it checked by a bmw specalist who said he never witnessed such protrusion. when removing the head i did notice that 4 of the headbolts were loose. also piston one at tdc when i rock it with my hand it is slapping off the cylinder, which explains the puff of blue/white smoke after starting. thats why im going for a full rebuild into a good block the head has been pressure tested and skimmed, and a set of ring should sort me out
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
I helped a fellow member get his non starting P38 off the road and onto his driveway.
Earlier in the day, I fixed my drivers window which was starting to struggle to go up by drilling out a rattly rivet and replacing it with a proper nut, bolt and washers, and fitted a replacement door card.
Mine does that, I put it down to a tired motor but will check the rivets now
I made one into a lightweight open top version
odysseus
Active Member
- Posts
- 231
- Location
- Cambridgeshire
Technically it was yesterday, but I fitted a replacement headlight, meaning I now have a matching set! Hurrah!
- Posts
- 724
- Location
- Lincolnshire
Hoping my new pulleys & tensioner will turn up in time to fit at the weekend. Everything with a bearing on mine is deciding it doesn't want to play anymore
Just done mine. Seems to have developed a slight chirpy noise but think it's probably just the new belt, will hopefully bed in. Still SORN'd at the mo, but house move coming up, a great excuse to put it back on the road.
odysseus
Active Member
- Posts
- 231
- Location
- Cambridgeshire
Cleaned up the four hurricane alloys I bought recently in preparation for painting them. I'm thoroughly looking forward to eventually getting them on the car as my black wheels are NOT growing on me.
Mulling over what tyres to put on these wheels when I'm done doing them up. If only there was a thread about tyres...
Mulling over what tyres to put on these wheels when I'm done doing them up. If only there was a thread about tyres...
