What did you do with your Range Rover today

Iv got one of each, p38 4.6 v8 and an l322 petrol 4.4 v8 on lpg and to be fair the l322 hasn't given me any real trouble.
Yet I almost rebuilt the p38 almost from day one it's now a cracking example iv yet to decide if I let it go as iv hardly used it this last year

Grrrrrr said:

Had a look at a 4.6 p38. Not without issues but nothing that cannot be fixed. Only issue is how much will it go for ... and how do I justify a second money pit?!

Click to expand...

What would cause the outside of the rear tyres to wear? Roundaboutitis the nearside but the offside too? Viscous coupling failing?

biketeacherdave said:

Iv got one of each, p38 4.6 v8 and an l322 petrol 4.4 v8 on lpg and to be fair the l322 hasn't given me any real trouble.
Yet I almost rebuilt the p38 almost from day one it's now a cracking example iv yet to decide if I let it go as iv hardly used it this last year

Click to expand...

That's the problem. You put all this work (and money) in to get it right and then if you don't use it then it'll get niggly from damp, the seals dry out etc. Sell it and you'll never make your money back, even writing off disposable items like oil, tyres, airbags, brakes, ball joints ... Clutches, head gaskets, hubs!

Grrrrrr said:

What would cause the outside of the rear tyres to wear? Roundaboutitis the nearside but the offside too? Viscous coupling failing?

Click to expand...

Have they been swapped front to back.

At risk of upsetting the fickle gods...

neilly said:

Do you think any of us are stupid enough to say it is running fine?
Cheers

Click to expand...

I also run a p38 and 2011 model 4.4TDV8 L322. I also used to run a 4.6 p38 - and in terms of trouble - the 4.6 was a money pit like no other, issues with dropping cylinder linings, overheating, blowing Head Gaskets, Air con and heating issues, usual EAS problems of course - that car seriously left me out of pocket - not on the normal RR scale of out of pocket - but an order of magnitude more than any other RR I have owned.

The 2.5D P38 - has been quite expensive - but nothing in comparison to the 4.6 - and in part it is because I have been giving it a bit of a thrashing around the green lanes and causing it some stress.

So, deep breath - so far the L322 has been a dream - I have had a couple of expensive repairs - again, I took it off road and got water in the rear diff' - which surprised me because you should be able to take a RR through a puddle - so a new diff was a bit 'ouch', (although I tracked down a company that re-conditioned my own for £250 - so that was not too bad) - and I have had a couple of incidents with other drivers knocking my mirror off - and apart from one that I managed to get done on their insurance, that is pretty expensive too. But from a maintenance and reliability perspective it is has been a dream so far. And talk about comfortable - mine was initially specified and built for one of the Directors of JLR - so its a top spec' Vogue SE with the entertainment upgrade and the Drive Assist package and the Autobiography upgrade - it is fantastic, and although I should not take a car that cost me as much as it did and is as precious to me as it is off road - It is a RR so I had to - and it is phenomenally good off road, 3" extra clearance over the P38 makes a big difference in ruts, axle twisters it does with ease - the only down side is that the super large Brembo brake callipers mean that you can't fit anything smaller than a 20" wheel on them - so you can't fit anything thicker than a thin profile road tyre - so you can't take them any where rocky unless you lift them and modify them, (the 4.4's I'm talking about), but even with road tyres I was amazed at how capable it was.

Took the P38 out for a bit of cautious fun as we were on our own - did some green lanes around Salisbury, weather was lovely, lanes were great and nothing went wrong.

Dopey said:

Is it me thinking this or is the L322 just a bunch of trouble? seems like so many different problems on the L322 compaird to the P38

Click to expand...

I have thought about an L322 a few times but having seen the issues on here and the number of people who whish they had kept their P38 I think i'll stick with mine until it becomes just not feasible anymore. Anyhow having just put 80ltrs in the tank at the equivalent of £42 running a 4.6 here is not too bad.

brianp38dse said:

Have they been swapped front to back.

Click to expand...

No, new tyres on front so maybe they were worse?

Salisbury Nick said:

did some green lanes around Salisbury and nothing went wrong.

Click to expand...

Where's the fun in that?!

Grrrrrr said:

What would cause the outside of the rear tyres to wear? Roundaboutitis the nearside but the offside too? Viscous coupling failing?

Click to expand...

Alignment?

Tenebreaux said:

Alignment?

Click to expand...

On the rear? I didn't think you could adjust it? There's the panhard rod bushes I guess. I'm trying to picture what else is under there but my memory is failing me. Must have a picture somewhere ... radius arm bushes. That's about it!

Grrrrrr said:

On the rear? I didn't think you could adjust it? There's the panhard rod bushes I guess. I'm trying to picture what else is under there but my memory is failing me. Must have a picture somewhere ...

Click to expand...

Not sure about RR. But wearing outside is normally a toe in/out issue.

Grrrrrr said:

What would cause the outside of the rear tyres to wear? Roundaboutitis the nearside but the offside too? Viscous coupling failing?

Click to expand...

Nothing on the rears. Front tyres wearing on outside too much toe in. On inside too much toe out.

Ordered some upper and lower ballpoints off or Rimmer's

Ugh.

Is it a major hassle to get the front grill out? The previous owner installed some crappy LED spots and the wiring is a total rats nest in there. It would be far easier to sort if I could get at it from the front.

Tenebreaux said:

Is it a major hassle to get the front grill out?

Click to expand...

Is easy.
2screws hidden in front and handful of torx screws across top

Tenebreaux said:

Is it a major hassle to get the front grill out? The previous owner installed some crappy LED spots and the wiring is a total rats nest in there. It would be far easier to sort if I could get at it from the front.

Click to expand...

Pozi screws on the top.

And 2 torx screws in-between the bottom slats.

Easy.

Just pulls off.

One of us is correct, maybe they are other way round on a V8

Thankyou gents.

Henry_b said:

Ordered some upper and lower ballpoints off or Rimmer's

Ugh.

Click to expand...

How much?!