What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
did an injector leak off test on my TD6 to check which injector was giving a bit of misfire, didn't clamp the return hose properly and managed to **** diesel on me block paving. but did find out it looks like no 1 and 3 are leaking back about twice as much as the others.which is a bit crap as no 1 was changed for a recon 18 months ago.
crashbox
Well-Known Member
- Posts
- 12,347
- Location
- In the UK, thankfully.
Removed the drivers side step to knock out a dent in it.
Become paranoid. Think the front right damper has **** the bed. Perfect timing for it... I wanted to replace the dampers with Terrafirma jobbies, but I'd never be able to get them until midnext week. Fingers crossed I can get some OEM jobbies from the landy dealer up road (or one of the many parts places around the area, ****part will do) tomorrow. If not I'm ****ered because I need my car for Monday morning. Bloody Land Rovers. Always picking the best time to fail.
Funfunfun.
Funfunfun.
- Posts
- 16,479
Replaced ABS ECU, Took it to a Local Indy to recode the ECU to the car - never knew this Indy existed....really really nice chaps!
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
As always bix
Just when you need it
I'm thinking new ones soon they feel tired on mine
Let us know how you get on and what you got .
I just bought a filter set **** part and a spare supposedly hd ****part uj and I tell you what looking at its construction I don't think I want to use it!! Steer clear if ****part .
Look
Bloody typical though, I was saving for a new bed (rock and roll baby) but it seems once again my stupid RR is going to spit her dummy. If they can't get OE dampers for me by Monday morning, I'll just order the Terrafirmas and limp around.
Holy****balls. That part is knackered out of the box. Perhaps I'll skip on ****part.
doz
Active Member
- Posts
- 615
- Location
- Southampton
As always bix
Just when you need it
I'm thinking new ones soon they feel tired on mine
Let us know how you get on and what you got .
I just bought a filter set **** part and a spare supposedly hd ****part uj and I tell you what looking at its construction I don't think I want to use it!! Steer clear if ****part .
Look
Just looks like the needle cap has moved. If it won't push back I bet one of the needle rollers has got stuck inside.
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Bloody typical though, I was saving for a new bed (rock and roll baby) but it seems once again my stupid RR is going to spit her dummy. If they can't get OE dampers for me by Monday morning, I'll just order the Terrafirmas and limp around.
Holy****balls. That part is knackered out of the box. Perhaps I'll skip on ****part.
Sod the bed you can do it in the back if the rangie and bed those shocks in
sas1810
New Member
- Posts
- 1,347
- Location
- back in Willenhall, West Midlands.
Looked on rave for the location of the crank sensor.
Are these things serviceable? Or is it just a new jobbie.
Also, rave is saying that there is a certain distance for it to be from the flywheel. But guess what, they don't tell you the measurement!
Are these things serviceable? Or is it just a new jobbie.
Also, rave is saying that there is a certain distance for it to be from the flywheel. But guess what, they don't tell you the measurement!
- Posts
- 16,479
Not servicable, and the distance should be set using the spacers supplied IIRC...
Grit Valve
2000 4.6 Vouge
- Posts
- 12,465
- Location
- Plaistow
Looked on rave for the location of the crank sensor.
Are these things serviceable? Or is it just a new jobbie.
Also, rave is saying that there is a certain distance for it to be from the flywheel. But guess what, they don't tell you the measurement!
If diagnostics shows duff and connections checked then no
Use original spacer for refitment
sas1810
New Member
- Posts
- 1,347
- Location
- back in Willenhall, West Midlands.
Cheers for that. I'll fetch it out and have a look. Might just be covered in ****.
stutab
Well-Known Member
- Posts
- 3,285
- Location
- Hemel Hempstead, Hertfordshire
Cut the last of the rot out of the front end. Weld in the footwell and A pillar and done Just the boot floor sides to cut out of the donor and weld in and THE ROT IS GONE, THE WELDER CAN GO AWAY
Just the boot floor sides to cut out of the donor and weld in and THE ROT IS GONE, THE WELDER CAN GO AWAY Well it turns out I can't get OE dampers until Tuesday at the earliest. So I've put in a order for Terrafirma front and rears (TF125 and TF126), hopefully they are in stock. £151 next day delivery. Probably won't get them until Tuesday either, but only reason I'd have used OE is if they could get them to me super quickly.
doz
Active Member
- Posts
- 615
- Location
- Southampton
That's a bummer. Are the Terra's better than say Monroe or Borge? I want to do my shocks soon having covered 114 k
mutsnutz
Well-Known Member
- Posts
- 1,964
- Location
- pink panther country
washed and polished it put three coats of wax on nice and shiny now
nice and shiny now To be honest, I have no idea. I've been told the Terra's are better, so I decided to take a punt and give them a crack. I'll let people know how I get on if I can get a set, read on one webby Terra are on worldwide backorder with dampers so they are hard to get hold of. Supplier closed for the weekend now, so will find out on Monday if they can get them.
