- Posts
- 69,196
- Location
- The Wooly Witch
And clean the pins and socket of any green shite, a thumbfull of dielectric grease will help to keep the damp out ...
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
And clean the pins and socket of any green shite, a thumbfull of dielectric grease will help to keep the damp out ...
- Posts
- 34,812
- Location
- North Shropshire
On the 2012 model is the bcm part of the passenger fuse box behind the glove box? I read on earlier models that it's under the passenger seat
- Posts
- 69,196
- Location
- The Wooly Witch
- Posts
- 34,812
- Location
- North Shropshire
I've just looked, that exact video, there's a compartment but that item doesn't seem to be there
- Posts
- 34,812
- Location
- North Shropshire
its definitely part of the fusebox, i thought it was but wanted to triple check before i spent a month taking everything to bits
- Posts
- 34,812
- Location
- North Shropshire
anyone know know the right way to remove the fuse box from a 2010-12 l322? before i end up taking the body off/engine out etc?
not looked closely so it might be obvious, but the green oval is now a black oval.. welcome to the dark side
not looked closely so it might be obvious, but the green oval is now a black oval.. welcome to the dark side
- Posts
- 69,196
- Location
- The Wooly Witch
- Posts
- 12,825
- Location
- Sud ouest France !
That's a ford thing for you
Our Volvo is on the same logic. The fuse board is hard coded and a gateway for the can system. Sh@te idea.
- Posts
- 12,825
- Location
- Sud ouest France !
Every now and then it'll refuse to start and continue as if you making it up... 
- Posts
- 34,812
- Location
- North Shropshire
well while theres no key registered to the car, its never going to start til i fix thisEvery now and then it'll refuse to start and continue as if you making it up...
i cant even start my 2A to move that right now, so i'm going to have to try and move it with the help of my trolly jack and heave on it The range rover px door is right up against it so can only half open it
- Posts
- 34,812
- Location
- North Shropshire
i've found one (fusebox/bcm) on ebay for an ok price.. the advert says its for 2010-2012 4.4tdv8 anyone know if that is good enough or do i need to check the exact part number?
badfluffy
Well-Known Member
- Posts
- 2,472
- Location
- northampton
if its like the jag xf it can only be programmed to the car by the stealer £500
- Posts
- 34,812
- Location
- North Shropshire
I've got the SDD software, that can fit a new BCM
thats assumung the VIN isnt hard coded
- Posts
- 19,504
- Location
- Buckinghamshire, UK. ('95 DT)
Couple of litres of accelerant and a match?
- Posts
- 19,504
- Location
- Buckinghamshire, UK. ('95 DT)
well while theres no key registered to the car, its never going to start til i fix this
i cant even start my 2A to move that right now, so i'm going to have to try and move it with the help of my trolly jack and heave on it The range rover px door is right up against it so can only half open it
What's wrong with the 2A? We can probably fix that.
- Posts
- 69,196
- Location
- The Wooly Witch
Bailer twine, wire and a lightbulb ?
- Posts
- 34,812
- Location
- North Shropshire
There's not that much left to do. The immediate is too change the rotted clutch Flexi hose and bleed it..
- Posts
- 19,504
- Location
- Buckinghamshire, UK. ('95 DT)
Yep, can help there. What do you need?!
- Posts
- 34,812
- Location
- North Shropshire
I've got one brake cylinder and all the shoes to replace, then the brakes should work
- Posts
- 34,812
- Location
- North Shropshire
I've got the hose already, just need to get to it
