- Posts
- 6,165
- Location
- North Manchester
They look funky
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
- Posts
- 33,450
- Location
- North Shropshire
Best get some thenThey look funky
Datatek
Well-Known Member
- Posts
- 44,849
- Location
- Near Poitiers SW France
So, the LHD P38 passed the CT (MOT) with no advisories so we did our biweekly long shopping run in it and found it had developed the dreaded 60mph shimmy:-( All the steering joints are new as are the CV joints, It was not there before the CT so when we got home I checked the tyre pressure as the tester always checks the pressure. The plonker had blown the fronts up to 40psi. Back down at 28psi, I'm hopeful the shimmy has gone.
This afternoon I spent pulling useful bits off the scrapper. Mirrors, WABCO pump assembly, rotary coupler, indicator stalks, interior door handles, EAS dryer and the crank damper.
so we did our biweekly long shopping run in it and found it had developed the dreaded 60mph shimmy:-( All the steering joints are new as are the CV joints, It was not there before the CT so when we got home I checked the tyre pressure as the tester always checks the pressure. The plonker had blown the fronts up to 40psi. Back down at 28psi, I'm hopeful the shimmy has gone.This afternoon I spent pulling useful bits off the scrapper. Mirrors, WABCO pump assembly, rotary coupler, indicator stalks, interior door handles, EAS dryer and the crank damper.
- Posts
- 33,450
- Location
- North Shropshire
When i got my 322, the tyres had been inflated to between 50-55psiSo, the LHD P38 passed the CT (MOT) with no advisories
This afternoon I spent pulling useful bits off the scrapper. Mirrors, WABCO pump assembly, rotary coupler, indicator stalks, interior door handles, EAS dryer and the crank damper.
Datatek
Well-Known Member
- Posts
- 44,849
- Location
- Near Poitiers SW France
Most of the other good stuff I took off ages ago. I'd like to get the gearbox and transfer box off but I think that's beyond me. The engine is toast, cracked head.And thats just the start
Where do you stop?
J
- Posts
- 12,609
- Location
- Sud ouest France !
Datatek
Well-Known Member
- Posts
- 44,849
- Location
- Near Poitiers SW France
I'll have to look it up but the FIP is not for sale. 156837 miles when scrapped.What mileage was on it if you remember?
I'll be up for a fuel pump soon and so on.
- Posts
- 12,609
- Location
- Sud ouest France !
1988smithy
Well-Known Member
- Posts
- 4,042
- Location
- West midlands
Checked the sunroof drains which were clear 
Had to clean the scuttle drains out tho
Boring, but worth checking
Edit to add
Just whipped the oil filter out to check spigot was located correctly
because the light flickered on at idle earlier. Its completely dry! Last drove it 4hrs ago, this aint normal is it??
Had to clean the scuttle drains out tho
Boring, but worth checking
Edit to add
Just whipped the oil filter out to check spigot was located correctly
Last edited:
We just did a six month interim service today on our 2006 3.0 TDi Range Rover Vogue, used the extractor pump to change the oil, wish I had owned one back in the day! Immaculate change absolutely NO oil spillage on the driveway or anywhere else, possibly the best £40 that I have ever spent of vehicle service gizmo's. Of course being an old RR it had to provide some 'entertainment' which it did in the form of one of the hex bolts on the air cleaner cover refusing to be reseated, but apart from that all good. Old oil filter was grim looking as was the air filter, real PITA changing the 'Elephant's tusk'! I use semi synthetic oil on the old girl which seems a happy medium but am amazed at how crap it soon gets to look when checking the oil levels, will probably do a full engine flush next service just to be sure.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Diesels amost always turn the oil black immediately
Checked the sunroof drains which were clear
Had to clean the scuttle drains out tho
View attachment 289785View attachment 289786
Boring, but worth checking
Edit to add
Just whipped the oil filter out to check spigot was located correctly View attachment 289787because the light flickered on at idle earlier. It’s completely dry! Last drove it 4hrs ago, this aint normal is it??
That don look like it’s had oil near it, let alone 4hrs ago.
was it oily at all?
what engine?
J
1988smithy
Well-Known Member
- Posts
- 4,042
- Location
- West midlands
3.6 tdv8
There was oil in the bottom of the filter housing, but the paper element was dry as a bone
no leaks evident around filter and housing either.It takes around 3 to 4 secs for oil light to go out on start up and it flickered on once today at idle just after start up.
P.o said he serviced it about 800miles ago now, I've checked air/pollen filters and they're brand new so evidently he did.
I was working on the assumption he'd put oil filter in without locating the spigot on the bottom but it wasn't crushed or deformed at all.
Cars parked nose up on a steepish drive but can't see that making any difference
3.6 tdv8
There was oil in the bottom of the filter housing, but the paper element was dry as a bone
It takes around 3 to 4 secs for oil light to go out on start up and it flickered on once today at idle just after start up.
P.o said he serviced it about 800miles ago now, I've checked air/pollen filters and they're brand new so evidently he did.
I was working on the assumption he'd put oil filter in without locating the spigot on the bottom but it wasn't crushed or deformed at all.
Cars parked nose up on a steepish drive but can't see that making any difference
Is it the same as the 4.4 with the filter on the top of the engine?
Try parking nose down
.J
1988smithy
Well-Known Member
- Posts
- 4,042
- Location
- West midlands
Yeah, pretty much mate. And the tdv6 just with crank fit for purposeIs it the same as the 4.4 with the filter on the top of the engine?
Try parking nose down
J
they eat turbos instead tho....Reckon that's worth a shot? It takes same time for oil light to go out on the level...I'm going to throw a genuine filter in on monday regardless
Yeah, pretty much mate. And the tdv6 just with crank fit for purpose
Reckon that's worth a shot? It takes same time for oil light to go out on the level...I'm going to throw a genuine filter in on monday regardless
Think the genuine filter would be a good place to start with.
J
- Posts
- 33,450
- Location
- North Shropshire
But but if the oil filter is dry, then pull hasn't been leaving the pump?
1988smithy
Well-Known Member
- Posts
- 4,042
- Location
- West midlands
Worst case, yeah, but its been running fine all week. Did about 50miles in it today
I'm hoping its a defective filter and new genuine one will get wet
- Posts
- 33,450
- Location
- North Shropshire
When i changed mine it was pretty dry, I'd gone for a drive to warm it a bit, loosened the filter housing then sucked the oil out via the tube. By the time I'd got to taking the filter out it looked similar. Not dry, but everything that could have dripped out had done so. It's thin oil so doesn't take longWorst case, yeah, but its been running fine all week. Did about 50miles in it today
I'm hoping its a defective filter and new genuine one will get wet
Mine is the 4.4
