What did you do with your Range Rover today

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Datatek said:
No bottom end power or torque on the M51 so you do have to rev them a bit. Mine struggles to get up the slope out of the valley unless booted, so I let them creep up the hill slowly. I manually hold it in 2nd with the gear lever if I want to get up the hill faster. As you say, they can take off PDQ when needed, especially when warmed up. Mine warm up quickly with no viscous fan:D
Click to expand...
I'm possibly going to say something silly now:oops::oops: but..I thougt that holding it in 1-2 or 3 just meant that the box just acted as in D but didn't change up any further than the 1-2 or 3 selected?
Although I can't see why you would need that feature. All autos have that though so , yes, I'm silly?:eek:
 
Buggrit. Coming home tonight and brake pedal started to make the same clunking noise again.. maybe i need to push forward the refurb of my old modulator!! Just wondering the chances of 2 making the same noise...
 
Flossie said:
Sounds like mine then but I wasn't sure how an auto was meant to be having never driven one. The only thing that bugs me is the cold engine pull away, I have to over rev (in my opinion) to get her moving and accelerating which goes against my mechanical sympathy.
I have read on the internet of people saying they are dangerous pulling out of busy junctions and the like, I've not found that at all, floor it and the wheels spin and she's off like a scoulded cat BUT that's lots of revs which I don't like with a cold engine.
Click to expand...
Have you considered some mods or mapping? The diesel with auto box is quite a slug really.
 
Flossie said:
I'm possibly going to say something silly now:oops::oops: but..I thougt that holding it in 1-2 or 3 just meant that the box just acted as in D but didn't change up any further than the 1-2 or 3 selected?
Although I can't see why you would need that feature. All autos have that though so , yes, I'm silly?:eek:
Click to expand...
In high range locking it in a gear will prevent it using higher gears. But it will still use that gear and any lower ones. So locking it in 2nd will mean it will use 1st and 2nd.
 
300bhp/ton said:
In high range locking it in a gear will prevent it using higher gears. But it will still use that gear and any lower ones. So locking it in 2nd will mean it will use 1st and 2nd.
Click to expand...
As I thought. So, on the road, of no benefit. If it acted as a manual box in 1-2-3 I could set off in 1 and change up to 2 without over revving with a cold engine.
I need the auto box to change up quicker with less revs but gentle acceleration with lower revs doesn't seem possible. Not an issue for me when she's warmed up, it just makes me cringe when setting off cold.
To answer the mapping question, I drive a 110 200tdi and the 38 is much nippier overall, very happy performance wise, it's just this frantic revving to get her moving that makes me cringe when cold.
Would a map improve that?
 
Flossie said:
As I thought. So, on the road, of no benefit. If it acted as a manual box in 1-2-3 I could set off in 1 and change up to 2 without over revving with a cold engine.
I need the auto box to change up quicker with less revs but gentle acceleration with lower revs doesn't seem possible. Not an issue for me when she's warmed up, it just makes me cringe when setting off cold.
To answer the mapping question, I drive a 110 200tdi and the 38 is much nippier overall, very happy performance wise, it's just this frantic revving to get her moving that makes me cringe when cold.
Would a map improve that?
Click to expand...
I used 3 quite a bit today towing my 2A home sometimes selected 2, holds it in gear and stops the constant changing also allows the TC to lock in 3rd
 
Flossie said:
As I thought. So, on the road, of no benefit. If it acted as a manual box in 1-2-3 I could set off in 1 and change up to 2 without over revving with a cold engine.
I need the auto box to change up quicker with less revs but gentle acceleration with lower revs doesn't seem possible. Not an issue for me when she's warmed up, it just makes me cringe when setting off cold.
To answer the mapping question, I drive a 110 200tdi and the 38 is much nippier overall, very happy performance wise, it's just this frantic revving to get her moving that makes me cringe when cold.
Would a map improve that?
Click to expand...
I’m no expert on the BMW lump. But I’d have thought as with most turbo diesel tuning you should be able to beef out the bottom of the rev range by over fuelling and increasing boost.

as for the revs. I think it is emission tuning. To get the engine up to temp quicker. Quite a few cars of this era do the same. But yes, sadly you can’t lock it in a gear in high range. Some newer cars can. But not these. They can in low range though. But not much use on the road or wanting to keep revs down! :D
 
The stall on the converter on the diesel is quite high so mapping it will make no real difference to the low end as the box doesn't really allow use of the bottom end, the D2 TD5 Auto is the same..
 
kermit_rr said:
But but but 4x4!!

Laws of physics don't apply!!! And it's got ABS traction control and i saw a YouTube video of a professional driver in a4x4 with studded snow tyres so it must be ok
Click to expand...
Best one I ever saw in fresh snow conditions was a 2CV years ago. Everything else dug in or spun tyres. That cut down through, plenty f ground clearance and no weight, slow revving motor so it didn't spin the tyres easily and when it got sideways a bit the rear wheels acted like rudders and pushed it straight again. Guy in it was having a whale of a time.
 
Flossie said:
Did an auto gearbox oil and filter change on Duchess. Old fluid was black and stinky so was expecting a big improvement in the box but it seems the same although I've never driven another and I don't know anyone nearby with a diesel to compare:p.
Got between an 1/8 and a 1/4 turn on all the valve block? Torx bolts too.
It does seem 'differant' now very slightly....
Shall do another oil change in the near future:cool:.
Wanted to grease the props whilst I was underneath but I can't get me end on the nipple, end is too fat:(.
I've read of someway round this but don't recall what it was:rolleyes:
Click to expand...
I used my bench grinder to thin the grease gun head down. Fits now;)
 
Last edited:
kermit_rr said:
I used 3 quite a bit today towing my 2A home sometimes selected 2, holds it in gear and stops the constant changing also allows the TC to lock in 3rd
Click to expand...
I find ,,,Might just be mine,, ,,If i put it in sports mode when towing a couple o tones up a hill ,it comes out of lockup and locks it in 4th at say 50mph and it holds that gear at 2500 rpm ,at the top of the hill push sport off and it locks up ,in ie 5th if you know what i mean, ,also i don't use cruse on really steep roads as it revs the hell out of it,,,, drops two many gears ,,,,i find just a gentle foot it changes smother ;).
 
Flossie said:
I'm possibly going to say something silly now:oops::oops: but..I thougt that holding it in 1-2 or 3 just meant that the box just acted as in D but didn't change up any further than the 1-2 or 3 selected?
Although I can't see why you would need that feature. All autos have that though so , yes, I'm silly?:eek:
Click to expand...
You are correct, selecting second stops the box shifting to third. However, climbing out of our valley cold engine on a light throttle opening, the box will shift to third which then requires more throttle to maintain speed, so I hold second. I also use the gear lever to force down shifts from top on some hills rather than waiting for the car to slow down for the shift to occur automatically, equally I use the gear lever on descents to select a lower gear for engine braking.
 
Looked in to my suspension issue properly. Had replaced the entire compressor unit to no avail so started looking at the wiring. Lo and behold, problem found. 20 minutes with solder, snips, heatshrink etc got it all sorted and working again!
IMG_20211130_131351.jpg


Saved me the £500-£780 2 'specialists' wanted to charge to replace it. :rolleyes:
 
domino said:
Looked in to my suspension issue properly. Had replaced the entire compressor unit to no avail so started looking at the wiring. Lo and behold, problem found. 20 minutes with solder, snips, heatshrink etc got it all sorted and working again!
View attachment 253637

Saved me the £500-£780 2 'specialists' wanted to charge to replace it. :rolleyes:
Click to expand...

Where are those pls? they look like they are in the boot/wheel well area.

J
 
Datatek said:
You are correct, selecting second stops the box shifting to third. However, climbing out of our valley cold engine on a light throttle opening, the box will shift to third which then requires more throttle to maintain speed, so I hold second. I also use the gear lever to force down shifts from top on some hills rather than waiting for the car to slow down for the shift to occur automatically, equally I use the gear lever on descents to select a lower gear for engine braking.
Click to expand...
Okey-dokey Ta.
Drove her again this morning after the short test run yesterday, immediately after the box oil change, and it seems to be very slightly improved a little more. I guess the new oil has to work its way round a bit and maybe the big improvement I was hoping for may still happen. Changes were smoother, not a lot, but noticeable.
I'm definitely going to do another oil change, is it worth doing it again now? Or let the mix of old and new churn around for a few hundred or thousand miles?
I got maybe 6 litres of new in. I want to look after her best I can.
 
Flossie said:
Okey-dokey Ta.
Drove her again this morning after the short test run yesterday, immediately after the box oil change, and it seems to be very slightly improved a little more. I guess the new oil has to work its way round a bit and maybe the big improvement I was hoping for may still happen. Changes were smoother, not a lot, but noticeable.
I'm definitely going to do another oil change, is it worth doing it again now? Or let the mix of old and new churn around for a few hundred or thousand miles?
I got maybe 6 litres of new in. I want to look after her best I can.
Click to expand...
A few hundred miles before a second change I reckon.
 
You must log in or register to reply here.

Similar threads

W
l322 range rover braking issue
Replies
5
Views
297
pwood999
pwood999
R
86 Range Rover Classic Poor idle
Replies
4
Views
418
Ratae
R
J
Range Rover sport shocks
Replies
9
Views
800
pwood999
pwood999
Maat
P38A Driver's door lock issues
Replies
12
Views
538
Datatek
Datatek
A
Range Rover L322 - not turning over
Replies
12
Views
5K
gold rover
gold rover
Back
Top