stemac33
Well-Known Member
- Posts
- 550
- Location
- Accrington, Lancs
You might have to go for fuel hose clips
Rather use spring ones like you get on coolant pipes, it's to go on a plastic connection and don't want to break it!Will those things with the 'ears' on that you crimp tight to clamp, work for your job?. Pneumatic places sell them.
That's what I've been looking for but nobody stocks less than 10mmYou might have to go for fuel hose clips
Trying to find a real shop where i can buy hose clips for 8mm pipe!! Nobody seems to sell them
Yep seen that brand.. just rang up a motor factors, they have some inPlumb merchants? Some microbore was 8mm. Assume you mean P clips?
BES are the online plumb merchants I use.
EDIT: just read further up. No idea but you'll want stainless steel. Maybe Google Mikalor?
https://www.ebay.co.uk/itm/12460868...7779&msclkid=8d92ca4b3a19189e39ffab68b5f1c0af
those will do too but i dont want to wait for delivery
Have you tried and made sure the instrument panel lights are turned up full? Daft question but....Hmmm. So what's been happening; I haven't solved the issue with the instrument lights. I have pulled out every connector, cleaned them all and made sure every wire was located correctly in its connector (leads me to the BECM and I have no clue at all with that!). I need to buy some new bulbs, two for the cruise control switch (1 orange and 1 green) and one for the clock, which I know is blown. I took the cruise switch out but didn't see any soldering issues plus it does work in regards to switching the cruise control on & off. Could both bulbs have blown; sure. But something is telling me there is perhaps another issue there that isn't showing. Keep in mind I have tested every wire and they are all good.
But wait, there's more (no steak knives though). Just these past few weeks the car has been bogging down a bit in the lower gears. About a month or 2 back I checked all fluid levels and they were all good. So I moved on to plugging in the Hawkeye today to see what was happening with the live data. Cylinder 3 has a misfire so I had a look at the spark plug and it looked fine. I tested the lead for spark and there was one but it was very weak. I tried some of the other ones and they were good and strong, except for the second one from the front on the right side of the block. That was also very weak. I managed to check and make sure all of the leads were secured correctly at both ends and tried the car again but the issue persisted. I'm worried now that it may be the coil pack as that's the only part of the ignition system I haven't changed since buying the car at the start of 2018. TPS, Maf sensor, spark plugs, HT leads (were OEM from the Landy dealer up in Motherwell) are all just going on 3 years old this November. So they shouldn't be causing this issue plus we do bugger all miles in it every year as well. However what I am going to do is go out tonight if I can and have a look in the dark and see if the leads are arcing anywhere they shouldn't be. If they are then that's another £200 spend for leads plus £100 if it is the coil pack. I need to rest before I go out tomorrow again and test the leads one by one when the engine is cold. Exciting times............
So right at this moment it isn't fun owning the car but I need to persevere because I need it, plus I also like it.
If there's a coil pack problem then you'd see a problem with cylinder #2 and #3 as it's the same coilHmmm. So what's been happening; I haven't solved the issue with the instrument lights. I have pulled out every connector, cleaned them all and made sure every wire was located correctly in its connector (leads me to the BECM and I have no clue at all with that!). I need to buy some new bulbs, two for the cruise control switch (1 orange and 1 green) and one for the clock, which I know is blown. I took the cruise switch out but didn't see any soldering issues plus it does work in regards to switching the cruise control on & off. Could both bulbs have blown; sure. But something is telling me there is perhaps another issue there that isn't showing. Keep in mind I have tested every wire and they are all good.
But wait, there's more (no steak knives though). Just these past few weeks the car has been bogging down a bit in the lower gears. About a month or 2 back I checked all fluid levels and they were all good. So I moved on to plugging in the Hawkeye today to see what was happening with the live data. Cylinder 3 has a misfire so I had a look at the spark plug and it looked fine. I tested the lead for spark and there was one but it was very weak. I tried some of the other ones and they were good and strong, except for the second one from the front on the right side of the block. That was also very weak. I managed to check and make sure all of the leads were secured correctly at both ends and tried the car again but the issue persisted. I'm worried now that it may be the coil pack as that's the only part of the ignition system I haven't changed since buying the car at the start of 2018. TPS, Maf sensor, spark plugs, HT leads (were OEM from the Landy dealer up in Motherwell) are all just going on 3 years old this November. So they shouldn't be causing this issue plus we do bugger all miles in it every year as well. However what I am going to do is go out tonight if I can and have a look in the dark and see if the leads are arcing anywhere they shouldn't be. If they are then that's another £200 spend for leads plus £100 if it is the coil pack. I need to rest before I go out tomorrow again and test the leads one by one when the engine is cold. Exciting times............
So right at this moment it isn't fun owning the car but I need to persevere because I need it, plus I also like it.
Have you tried and made sure the instrument panel lights are turned up full? Daft question but....
If there's a coil pack problem then you'd see a problem with cylinder #2 and #3 as it's the same coil
Odds passenger side, evens drivers sideI didn't know that so thanks. 1,2,3,4 are all on the left bank when looking at the block from the front, right? Or is it across the block? Honestly right now I can't remember and I don't have RAVE at hand to look again. I swear I forget things the moment they go in.
Sure I saw a brand new coil pack for sale on the Bay, seemed reasonable but what do I know, diesels don't need them.Thanks. I'll go back and have another look later.
Welcome To LandyZone, the Land Rover Forums!
Here at LandyZone we have plenty of very knowledgable members so if you have any questions about your Land Rover or just want to connect with other Landy owners, you're in the right place.
Registering is free and easy just click here, we hope to see you on the forums soon!