- Posts
- 33,600
- Location
- North Shropshire
Nothing worse than the smell of last week's slops
What did you do with your Range Rover today
- Thread starter Dopey
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Seeing double
https://www.ebay.co.uk/itm/2002-02-...041515?hash=item2f538a646b:g:3iAAAOSw5WdgFxXu
Oi @Enthusiastman here is a contender
https://www.ebay.co.uk/itm/2002-02-...041515?hash=item2f538a646b:g:3iAAAOSw5WdgFxXu
Oi @Enthusiastman here is a contender
You selling your car?Seeing double
https://www.ebay.co.uk/itm/2002-02-...041515?hash=item2f538a646b:g:3iAAAOSw5WdgFxXu
Oi @Enthusiastman here is a contender
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
brianp38dse
Well-Known Member
- Posts
- 20,062
- Location
- heathrow
Seeing double
https://www.ebay.co.uk/itm/2002-02-...041515?hash=item2f538a646b:g:3iAAAOSw5WdgFxXu
Oi @Enthusiastman here is a contender
Looks really nice but i would have to change the rear exhaust boxes they look horrendious hanging down like that
Phew, you had me worried for a second there.Nope bu that one is a mirror image of mine
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
DittoLooks really nice but i would have to change the rear exhaust boxes they look horrendious hanging down like that
One of the main reasons I fitted a proper SS system to mine
Much tiidier and how they should of left the factory in my opinion,
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Dont be greedy nowSeeing double
https://www.ebay.co.uk/itm/2002-02-...041515?hash=item2f538a646b:g:3iAAAOSw5WdgFxXu
Oi @Enthusiastman here is a contender
- Posts
- 2,427
- Location
- Isle Sheppy
Looks a good example that one don’t it
DarthDude
Well-Known Member
- Posts
- 298
- Location
- Kuala Lumpur
Book error on the HEVAC display. If it's the blend motors, that's a dashboard-out job, methinks.
- Posts
- 33,600
- Location
- North Shropshire
My book error came in the other day when i unplugged the left heated screen relay #5
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
Blend motors can be done without removing the dash
brianp38dse
Well-Known Member
- Posts
- 20,062
- Location
- heathrow
Ditto
One of the main reasons I fitted a proper SS system to mine
Much tiidier and how they should of left the factory in my opinion,
Very much neater and i do prefer the straight out pipes mine are the curved hidden ones, i am sure a saw some after market extenstions that took them down and out straight in chrome
DarthDude
Well-Known Member
- Posts
- 298
- Location
- Kuala Lumpur
Sure.... it doesn't HAVE to be the blend motors..... but you know.... it COULD also be.
Heh. Actually there's a page I remember where the guy tells you how to rebuild the blend motors.... and you can use JST plugs on the leads so that you can remove the individual blend motors without having to remove all 3 of them, and therefore the dash.
The blend motor repair how-to is at https://www.stockholmviews.com/p38/index.html#blend and he has some other tips as well..... I've done it and it works.
These are the connectors I used on my blend motors which allow them to be unplugged and removed individually. I think they've been in there 6 years or so now, so I reckon they're fine for the job. Amazon product
Together with the stockholmviews how-to, blend motor failure isn't the dreaded event it used to be.
Heh. Actually there's a page I remember where the guy tells you how to rebuild the blend motors.... and you can use JST plugs on the leads so that you can remove the individual blend motors without having to remove all 3 of them, and therefore the dash.
The blend motor repair how-to is at https://www.stockholmviews.com/p38/index.html#blend and he has some other tips as well..... I've done it and it works.
These are the connectors I used on my blend motors which allow them to be unplugged and removed individually. I think they've been in there 6 years or so now, so I reckon they're fine for the job. Amazon product
Together with the stockholmviews how-to, blend motor failure isn't the dreaded event it used to be.
- Posts
- 33,600
- Location
- North Shropshire
I replaced a single blend motor no problem.
Also tried to repair the old one but i think the actual motor was no good ie pulling the wrong amp count
Also tried to repair the old one but i think the actual motor was no good ie pulling the wrong amp count
Ooft, that's a nice zorst. Have to get myself one of them when my current one starts to fall apart. Wonder if they do turbo back. My cat is rattling so it already needs replacing ;DDitto
One of the main reasons I fitted a proper SS system to mine
Much tiidier and how they should of left the factory in my opinion,
DarthDude
Well-Known Member
- Posts
- 298
- Location
- Kuala Lumpur
Sure.... you can do it with a bit of determination and gymnastics... but installing plugs on the leads helps. A lot.
The motors are pretty generic. I can't remember which they are now, exactly... but I think they're the same as those used in those Tamiya slot racers.
Anybody?
Either way, they're not some super proprietary motor. You should be able to buy them.
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
I'm sure there are some ebay specials that would allow you to have chrome tipsVery much neater and i do prefer the straight out pipes mine are the curved hidden ones, i am sure a saw some after market extenstions that took them down and out straight in chrome
Henry_b
Think outside, no box required.
- Posts
- 15,506
- Location
- somewhere else
My Cats rattle too I have a set of 200cel sports cats to fit when the weather warms up, that'll change the exhaust note again...
With the Janspeed SS exhaust with a centre muffler she is still very refined but has a very pleasant growl when hot and given the boot, burbles nice at idle too..
But not that horrible raspy racket the straight pipe P38s make..
mine
not that long i'm afraidvs a straightpipe
some like the sound but personally I couldn't live with that racket!
The DSE I imagine would sound quite good with a stainless system or a muffler delete
