P38A What a rubbish fob design.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
DanClarke

DanClarke

Well-Known Member
Full Member
Posts
16,354
Location
Benfleet, Essex
"Fob Battery Low" message on Dash.
New batteries at the ready, and...... Open fob battery cover (with difficulty) with coin "as per handbook". replace batteries and close up fob. No lights on any button press. De-nada.
Open again, remove batteries, chacl spring contacts in fob are all ok, close again. Nope!
Open again, check voltage of new batteries Hmm.. 6.53V. Check voltage of old batteries Hmmm. 6.49V.
Neither set of batteries will light up the led's (i.e. there's no power getting through).

Handbook says change batteries within 1 minute or resynch required. How?
They have made it such a palaver that is virtually impossible.

The design is so poor and the "window" for getting connectivity is so small you have to put a lot of force on the slot to fully close and make contact. If they had made it wider the "wiper" on the battery compartment would make contact a lot easier/earlier across a range.
Battery cover is now resembling a chewed-up pontefract cake. New covers on order. :mad:
LR... You suck big-time.:D:D:D
 
marjon said:
Now breath:D do you feel better now:D.

I always have a new lid available and a second set of batteries. why hurry re-sync is no issue:D.
But yes I can relate to all you have said:D
J
Click to expand...
Yes. Feeling a lot better now thank you. ;)
I think the problem is that I did not have the "farthing" coin required by their design. :)
 
DanClarke said:
"Fob Battery Low" message on Dash.
New batteries at the ready, and...... Open fob battery cover (with difficulty) with coin "as per handbook". replace batteries and close up fob. No lights on any button press. De-nada.
Open again, remove batteries, chacl spring contacts in fob are all ok, close again. Nope!
Open again, check voltage of new batteries Hmm.. 6.53V. Check voltage of old batteries Hmmm. 6.49V.
Neither set of batteries will light up the led's (i.e. there's no power getting through).

Handbook says change batteries within 1 minute or resynch required. How?
They have made it such a palaver that is virtually impossible.

The design is so poor and the "window" for getting connectivity is so small you have to put a lot of force on the slot to fully close and make contact. If they had made it wider the "wiper" on the battery compartment would make contact a lot easier/earlier across a range.
Battery cover is now resembling a chewed-up pontefract cake. New covers on order. :mad:
LR... You suck big-time.:D:D:D
Click to expand...

I am still using my original key. Never changed the batteries but then I cannot get the cover off. I figured once I start needing to hold it to the window I will contact MrSporty!
 
DanClarke said:
"Fob Battery Low" message on Dash.
New batteries at the ready, and...... Open fob battery cover (with difficulty) with coin "as per handbook". replace batteries and close up fob. No lights on any button press. De-nada.
Open again, remove batteries, chacl spring contacts in fob are all ok, close again. Nope!
Open again, check voltage of new batteries Hmm.. 6.53V. Check voltage of old batteries Hmmm. 6.49V.
Neither set of batteries will light up the led's (i.e. there's no power getting through).

Handbook says change batteries within 1 minute or resynch required. How?
They have made it such a palaver that is virtually impossible.

The design is so poor and the "window" for getting connectivity is so small you have to put a lot of force on the slot to fully close and make contact. If they had made it wider the "wiper" on the battery compartment would make contact a lot easier/earlier across a range.
Battery cover is now resembling a chewed-up pontefract cake. New covers on order. :mad:
LR... You suck big-time.:D:D:D
Click to expand...
Theres a little strip from bottom of lid where you seat batteries that comes up the side and this has a habit of moving about when changing batteries.
Totally agree a sh*te design:D:D:D
 
Rubberknees said:
Theres a little strip from bottom of lid where you seat batteries that comes up the side and this has a habit of moving about when changing batteries.
Totally agree a sh*te design:D:D:D
Click to expand...
Yup, that's the one Wammers recommended putting a thin strip of insulation tape on.:D two pence piece I find works. I had my fob overhauled and the battery low warning came on the dash within a week or two. A new battery cover sorted that problem curtosy of @mozz smith , cheers Arthur.;)
 
In my old Monaro, the key had a metal tip on the handle - it made a connection with the barrel when inserted... Which then charged the battery.

Never understood why other manufacturers didn't do the same as it makes so much sense!
 
It's the only fob I've come across with rubber buttons that aren't fitted on the inside, mine don't fit properly anymore and has 'grown' along the diagonal.. it will fall out eventually
 
You must log in or register to reply here.

Similar threads

Rubberknees
P38 key fob
Replies
14
Views
2K
Rubberknees
Rubberknees
Ola66
L322 2007 Vogue SE 3.6TDV8 Doesn't recognise key fob, can't turn key in ignition or turn off alarm!
Replies
5
Views
792
Graculus
Graculus
Rubberknees
What to use in key fob
2
Replies
20
Views
2K
Wazzajnr
Wazzajnr
Charlot
FOB problems.
Replies
2
Views
668
Charlot
Charlot
Roverdrive
L322 L322 Battery strangeness
Replies
16
Views
1K
kermit_rr
kermit_rr
Back
Top