stevebrookman
Well-Known Member
- Posts
- 388
Hello all,
Have recently changed air springs and am going to reset the ride heights (noticed it was riding a little high). Ordered a cable from Keith (Datatek-superb service-arrived in 2 days!!) and am waiting for my serial to USB adaptor from the bay.
I decided to measure the heights today in preparation for resetting.
There is something strange with normal ride height-
If you use the button to select extended height and then normal-all the readings are as they should be-47cm (give or take a few mill),
If I then turn the engine off and then restart the suspension raises to 51cm all around-indicator on dash still says normal ride height. If I select extended height it goes up and will then drop to 47cm if normal selected.
So everytime I go out it's riding at 51cm. I fitted Bilstein gas shocks years ago-don't know if this would cause it.
So i have two different heights for normal ride height-any thoughts?
Steve
Have recently changed air springs and am going to reset the ride heights (noticed it was riding a little high). Ordered a cable from Keith (Datatek-superb service-arrived in 2 days!!) and am waiting for my serial to USB adaptor from the bay.
I decided to measure the heights today in preparation for resetting.
There is something strange with normal ride height-
If you use the button to select extended height and then normal-all the readings are as they should be-47cm (give or take a few mill),
If I then turn the engine off and then restart the suspension raises to 51cm all around-indicator on dash still says normal ride height. If I select extended height it goes up and will then drop to 47cm if normal selected.
So everytime I go out it's riding at 51cm. I fitted Bilstein gas shocks years ago-don't know if this would cause it.
So i have two different heights for normal ride height-any thoughts?
Steve