Washer Jets - adjustment

Karls · Sep 18, 2018

I’ve got the pictured washer jets fitted for the front screen. They currently spray onto the lightbar, ideally, I’d like them to spray onto the screen.
Are these jets adjustable? I tried with a pin but it just bent. I intend to try again with a small drill bit in the hope they move before the drill snaps.

Surely they are movable but...this is Land Rover.

Litch · Sep 18, 2018

Yes they are, try a stronger pin.

dag019 · Sep 18, 2018

If they have not been moved for a while they are likely to be very stiff but they should be definitely move.

Flossie · Sep 18, 2018

Pour a kettle of boiling water over them and try again.
Worked for me once.

Karls · Sep 18, 2018

Great, cheers guys!

Paul D · Sep 19, 2018

The movable part is only the top, the metal 'ball' you can just see, but a pin usually goes all the way through, so it won't move the movable bit! Don't poke the pin all the way in, as the nun said to the bishop ..

Flossie · Sep 19, 2018

Paul D said:
The movable part is only the top, the metal 'ball' you can just see, but a pin usually goes all the way through, so it won't move the movable bit! Don't poke the pin all the way in, as the nun said to the bishop ..

Yes, good point, I'd forgotten about that.

cappers · Oct 29, 2018

Saw this vid and was quite impressed, if it works as shown....

Thinking of replacing my single jet pencil type to the twin jet type and this seems easier than crawling through the ashtray hole or dismantling the dash

edit: a lot of talking, down to business about 1:30.

Washer Jets - adjustment

Karls

Active Member

Litch

Well-Known Member

dag019

Well-Known Member

Flossie

Well-Known Member

Karls

Active Member

Paul D

Old, nackered 'n broke, but the Landy is fine . :)

Flossie

Well-Known Member

cappers

Well-Known Member

Similar threads