Wanted. 2.25 5 brg petrol engine.

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
spitfiremk1uk

spitfiremk1uk

Active Member
Posts
144
Just as the title says. Does anyone have an unloved, tired 2.25 late series petrol engine they want to sell to a good home.
Its for a total rebuild and fitment into a restored 88.

Thanks
 
I've got a 5bg military block. No cyl head, timing cover or ancillaries. It has a military rebuild plate on it as well. Not after much, if anything at all. Oh, and it's in Evesham, Worcs.
 
Thanks for the offer. I will bare it in mind. But I am hoping to get a complete engine or at least engine less ancilleries so I have a complete starting point.

If I need a short block I will be in touch. Cheers.
 
You can have mine for free!!!!

It needs a good recondition, but comes with carb, both manifolds, starter and pretty much everything else except for the alternator! It's a 5 main bearing one (1980).

I am no longer in the UK, but the engine is sitting outside my workshop in Balham (London) so you can just go and pick it up if you want it (PM me for details).

Also sitter there are a full set of 2 leaf (front and rear) parabolics and some other bits which you can have for free too. They'll be picked up by a scrapy in a few weeks otherwise.

The engine seized a little due to low oil (think its the rear oil seal) and be being bad with checking but is now unsiezed. Though it's been sitting in the rain so might need a rehone to clear rust and whatnot (head was off for a few weeks but is now back on). But otherwise it's in good nick.
 
I'm in need of one also. 2.25L petrol. I have a 300tdi with an R380 transmission (I think because I need to clean up the serial number to make sure) willing to do an even exchange. If you need more info PM me.

Thank you!
 
I'm in Portsmouth with a very tidy 2.25 1967 running well, I'm looking to change it for a V8 but have little knowledge and am looking for assistance, happy to swap, part ex, or buy, but need an engine that will be fitted by someone other than me, obviously paying for your labour. I have the enthusiasm, can help with muscle and make a proper Yorkshire cup of tea, but have not got the knowledge or the space.
Scottie
 
Last edited:
You must log in or register to reply here.

Similar threads

beerdude
3 or 5 Bearing engine?
Replies
1
Views
569
marjon
marjon
M
2.25 series Land Rover petrol engine block for sale
Replies
3
Views
2K
Tirran
Tirran
WoodyO
Wanted 2.25 or 2.5 N/A diesel engine
Replies
5
Views
1K
Highpeakdefender
H
S
LAND ROVER DISCOVERY 3.0L 306DT I WANT TO FIT A GEN 1 ENGINE INTO A GEN 2
Replies
1
Views
229
lynall
L
A
Engine cutting out 2.25 petrol
Replies
3
Views
1K
Tony Monsantoe
Tony Monsantoe
Back
Top